HTS
2023 HTSA Revision 9
Search Results:42
3911
Petroleum resins, coumarone-indene resins, polyterpenes, polysulfides, polysulfones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms:
3911.10.00.00
Petroleum resins, coumarone, indene or coumarone-indene resins; polyterpenes
3911.20.00.00
Poly(1,3-phenylene methylphosphonate)
3911.90
Other:
3911.90.10.00
Elastomeric
3911.90.15.00
Poly(nitrilomethanetetraarylnitrilo- [2,4,6-tris-(1-methyethyl)-1,3- phenylene]]-2,6-bis(1-methylethyl)- phenyl]-ω-[[[2,6-bis(1-methylethyl)- phenyl]amino]methylene]amino carbodiimide or 2,4-diisocyanate-1,3,5-tris(1-methyl- ethyl) homopolymer with polyethylene
3911.90.25.00
Other
3911.90.35.00
1,1'-Bis(methylenedi-4,1-phenylene)- 1H-pyrrole-2,5-dione, copolymer with 4,4'-methylenebis(benzeneamine); and Hydrocarbon novolac cyanate ester
3911.90.45.00
Other
3911.90.70.00
Chlorinated synthetic rubber
3911.90.91
Other
3911.90.91.10
Thermoplastic
3911.90.91.50
Thermosetting
9902.05.79
2,6-Dichloro-N-[3-chloro-5-(trifluoromethyl)-2- pyridylmethyl]benzamide (Fluopicolide) (CAS No. 239110-15-7) (provided for in subheading 2933.39.21)
9902.11.43
1,4:5,8-Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS No. 881025-72-5), presented in pellet form (provided for in subheading 3911.90.25)
9902.11.44
Polyethylenimine (CAS No. 9002-98-6), refrigerated, in containers not holding over 1 L (provided for in subheading 3911.90.25)
9902.11.45
Polyethylenimine (CAS No. 9002-98-6), of a kind used as a component for further manufacturing into a finished medical device (provided for in subheading 3911.90.25)
9902.11.46
1,6-diisocyanatohexane; 2,4-diisocyanato-1-methylbenzene polymer (CAS No. 26426-91-5) in n-butyl acetate (provided for in subheading 3911.90.45)
9902.11.47
Poly(toluene diisocyanate) (CAS No. 26006-20-2) (provided for in subheading 3911.90.45)
9902.11.48
Water-dispersible polyisocyanate products based on poly(hexamethylene diisocyanate) (CAS No. 28182-81-2) and dimethyldicyclohexylamine compounds with 3-(cyclohexylamino)-1-propanesulfonic acid-poly(1,6-diisocyanatohexane) (CAS No. 666723-27-9) (provided for in subheading 3911.90.90)
9902.11.49
Poly(1,6-diisocyanatohexane)-block-polyethylene-block-poly (1-butoxypropan-2-ol) (CAS no. 125252-47-3) (provided for in subheading 3911.90.90)
9902.11.50
N,N',N''-[(2,4,6-Trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl) tris [methylene(3,5,5-trimethyl-3,1-cyclohexanediyl)]] tris [hexahydro-2-oxo-1H-azepine-1-carboxamide] (CAS No. 68975-83-7) in organic solvent (provided for in subheading 3911.90.90)
9902.11.51
3,5-Dimethyl-1H-pyrazole-oligo(hexamethylene diisocyanate) in solvents (CAS No. 163206-31-3) (provided for in subheading 3911.90.90).
9902.11.52
α-Alkenes, C14-C20, polymers with maleic anhydride, 2-(1-piperazinyl) ethylimides, plasticized with diisononyl phthalate (CAS No. 28553-12-0) and bis(1-methylethyl)-naphthalene (CAS No. 38640-62-9) (provided for in subheading 3911.90.90)
9902.11.53
2,4-Diisocyanato-1-methylbenzene; 5-(1,3-dioxo-2-benzofuran-5-carbonyl)-2-benzofuran-1,3-dione; 1-isocyanato-4-[(4-isocyanatophenyl)methyl]benzene (CAS No. 58698-66-1) (provided for in subheading 3911.90.90)
9902.11.54
Poly(ethylene-ran-(2-norbornene)) (CAS No. 26007-43-2), comprising 64 (plus or minus 3) percent by weight ethylene (CAS No. 74-85-1), having a glass transition temperature of 78 (plus or minus 4) °C, and containing not less than 3 percent by weight polyethylene (CAS No. 9002-88-4) (provided for in subheading 3911.90.90)
9902.11.55
1,6-Hexanediamine, N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-1-butanamine and N-buty-2,2,6,6-tetramethyl-4-piperidinamine (CAS No. 192268-64-7)(provided for in subheading 3911.90.90)
9902.11.56
Poly(divinylbenzene-co-ethylstyrene) (CAS No. 9043-77-0) (provided for in subheading 3911.90.90)
9902.11.43
1,4:5,8-Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS No. 881025-72-5), presented in pellet form (provided for in subheading 3911.90.25)
9902.11.44
Polyethylenimine (CAS No. 9002-98-6), refrigerated, in containers not holding over 1 L (provided for in subheading 3911.90.25)
9902.11.45
Polyethylenimine (CAS No. 9002-98-6), of a kind used as a component for further manufacturing into a finished medical device (provided for in subheading 3911.90.25)
9902.11.46
1,6-diisocyanatohexane; 2,4-diisocyanato-1-methylbenzene polymer (CAS No. 26426-91-5) in n-butyl acetate (provided for in subheading 3911.90.45)
9902.11.47
Poly(toluene diisocyanate) (CAS No. 26006-20-2) (provided for in subheading 3911.90.45)
9902.11.48
Water-dispersible polyisocyanate products based on poly(hexamethylene diisocyanate) (CAS No. 28182-81-2) and dimethyldicyclohexylamine compounds with 3-(cyclohexylamino)-1-propanesulfonic acid-poly(1,6-diisocyanatohexane) (CAS No. 666723-27-9) (provided for in subheading 3911.90.90)
9902.11.49
Poly(1,6-diisocyanatohexane)-block-polyethylene-block-poly (1-butoxypropan-2-ol) (CAS no. 125252-47-3) (provided for in subheading 3911.90.90)
9902.11.50
N,N',N''-[(2,4,6-Trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl) tris [methylene(3,5,5-trimethyl-3,1-cyclohexanediyl)]] tris [hexahydro-2-oxo-1H-azepine-1-carboxamide] (CAS No. 68975-83-7) in organic solvent (provided for in subheading 3911.90.90)
9902.11.51
3,5-Dimethyl-1H-pyrazole-oligo(hexamethylene diisocyanate) in solvents (CAS No. 163206-31-3) (provided for in subheading 3911.90.90).
9902.11.52
α-Alkenes, C14-C20, polymers with maleic anhydride, 2-(1-piperazinyl) ethylimides, plasticized with diisononyl phthalate (CAS No. 28553-12-0) and bis(1-methylethyl)-naphthalene (CAS No. 38640-62-9) (provided for in subheading 3911.90.90)
9902.11.53
2,4-Diisocyanato-1-methylbenzene; 5-(1,3-dioxo-2-benzofuran-5-carbonyl)-2-benzofuran-1,3-dione; 1-isocyanato-4-[(4-isocyanatophenyl)methyl]benzene (CAS No. 58698-66-1) (provided for in subheading 3911.90.90)
9902.11.54
Poly(ethylene-ran-(2-norbornene)) (CAS No. 26007-43-2), comprising 64 (plus or minus 3) percent by weight ethylene (CAS No. 74-85-1), having a glass transition temperature of 78 (plus or minus 4) °C, and containing not less than 3 percent by weight polyethylene (CAS No. 9002-88-4) (provided for in subheading 3911.90.90)
9902.11.55
1,6-Hexanediamine, N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-1-butanamine and N-buty-2,2,6,6-tetramethyl-4-piperidinamine (CAS No. 192268-64-7)(provided for in subheading 3911.90.90)
9902.11.56
Poly(divinylbenzene-co-ethylstyrene) (CAS No. 9043-77-0) (provided for in subheading 3911.90.90)
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 3911 | Petroleum resins, coumarone-indene resins, polyterpenes, polysulfides, polysulfones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms: | |||||
| 3911.10.00 | 00 | Petroleum resins, coumarone, indene or coumarone-indene resins; polyterpenes | kg | 6.1% | Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 49% |
| 3911.20.00 | 00 | Poly(1,3-phenylene methylphosphonate) | kg | 6.5% | Free (A, AU, BH, CL, CO, D, E, IL, JO, K, KR, MA, OM, P,PA, PE, S, SG) | 2.2¢/kg + 33.5% |
| 3911.90 | Other: | |||||
| 3911.90.10 | 00 | Elastomeric | kg | Free | 20% | |
| Other: | ||||||
| Containing monomer units which are aromatic or modified aromatic, or which are obtained, derived or manufactured in whole or in part therefrom: | ||||||
| Thermoplastic: | ||||||
| 3911.90.15 | 00 | Poly(nitrilomethanetetraarylnitrilo- [2,4,6-tris-(1-methyethyl)-1,3- phenylene]]-2,6-bis(1-methylethyl)- phenyl]-ω-[[[2,6-bis(1-methylethyl)- phenyl]amino]methylene]amino carbodiimide or 2,4-diisocyanate-1,3,5-tris(1-methyl- ethyl) homopolymer with polyethylene | kg | Free | 15.4¢/kg + 49% | |
| 3911.90.25 | 00 | Other | kg | 6.1% | Free (A,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 49% |
| Thermosetting: | ||||||
| 3911.90.35 | 00 | 1,1'-Bis(methylenedi-4,1-phenylene)- 1H-pyrrole-2,5-dione, copolymer with 4,4'-methylenebis(benzeneamine); and Hydrocarbon novolac cyanate ester | kg | Free | 15.4¢/kg + 45% | |
| 3911.90.45 | 00 | Other | kg | 5.8% | Free (A,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 15.4¢/kg + 45% |
| Other: | ||||||
| 3911.90.70 | 00 | Chlorinated synthetic rubber | kg | Free | 2.2¢/kg + 33.5% | |
| 3911.90.91 | Other | 6.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,K,KR,MA,OM,P,PA,PE,S,SG) | 2.2¢/kg + 33.5% | ||
| 10 | Thermoplastic | kg | ||||
| 50 | Thermosetting | kg | ||||