In airtight containers of glass or metal

Natural sands of all kinds, whether or not colored, other than metalbearing sands of chapter 26:

Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast; shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading 2515 or 2516, whether or not heat-treated:

Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast, shingle and flint, whether or not heat-treated

Other metal content

Precious metal ores and concentrates:

Other precious metal content

Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds:

Containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metalsor for the manufacture of their chemical compounds:

Hydrogen, rare gases and other nonmetals:

Alkali or alkaline-earth metals; rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed; mercury:

Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed

Other inorganic acids and other inorganic oxygen compounds of nonmetals:

Halides and halide oxides of nonmetals:

Sulfides of nonmetals; commercial phosphorus trisulfide:

Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides:

Silicates; commercial alkali metal silicates:

Salts of oxometallic or peroxometallic acids:

Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals:

Colloidal precious metals

Uranium metal

Uranium metal

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium, or of mixtures of these metals:

Containing lanthanum as the predominant metal

Containing yttrium or scandium as the predominant metal

Containing yttrium or scandium as the predominant metal

Containing lanthanum as the predominant metal

Phosphides, whether or not chemically defined, excluding ferrophosphorous; other inorganic compounds (including distilled or conductivity water and water of similar purity); liquid air (whether or not rare gases have been removed); compressed air; amalgams, other than amalgams of precious metals:

Of other metals or nonmetals

Esters of other inorganic acids of nonmetals (excluding esters of hydrogen halides) and their salts; their halogenated, sulfonated, nitrated or nitrosated derivatives:

Acid dyes, whether or not premetallized, and preparations based thereon; mordant dyes and preparations based thereon:

Pigments (including metallic powders and flakes) dispersed in nonaqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other coloring matter put up in forms or packings for retail sale:

Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading 3404:

Polishes and similar preparations for coachwork, other than metal polishes

Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods:

Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materials

With precious metal or precious metal compounds as the active substance

Nonagglomerated metal carbides mixed together or with metallic binders

Mixtures of dibromo neopentyl glycol; Polydibromophenylene oxide; Tetrabromobisphenol-A-carbonate oligomers; and Electroplating chemical and electroless plating solutions and other materials for printed circuit boards, plastics and metal finishings

Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids

Reinforced with metal

Ice bags; douche bags, enema bags, hot water bottles, and fittings therefor; invalid and similar nursing cushions; dress shields; pessaries; prophylactics; bulbs for syringes; syringes (other than hypodermic syringes) and fittings therefor, not in part of glass or metal

Reinforced only with metal

Chamois (including combination chamois) leather; patent leather and patent laminated leather; metallized leather:

Patent leather and patent laminated leather; metallized leather:

Wholly or partly covered with flock, gelatin, metal or metal solutions

Mixed mainly or solely with artificial filaments or metalized yarn (620)

Mixed mainly or solely with artificial filaments or metalized yarn (620)

Mixed mainly or solely with artificial filaments or metalized yarns (620)

Mixed mainly or solely with synthetic filaments or metalized yarn (618)

Metalized yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal:

Metal coated or metal laminated man-made filament or strip or the like, ungimped, and untwisted or with twist of less than 5 turns per meter

Of metalized yarn (229)

Woven fabrics of metal thread and woven fabrics of metalized yarn of heading 5605, of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere specified or included (229)

Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material:

Footwear incorporating a protective metal toe-cap

Other footwear, incorporating a protective metal toe-cap:

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Segments for circular sawblades, consisting of diamond agglomerated with metal

Articles consisting of a continuous rim segment of diamond agglomerated with metal, attached to circular plates of steel (whether or not attached to non-steel plates)

Articles consisting of multiple segments of diamond agglomerated with metal, attached to circular plates of steel, without cutting parts (whether or not attached to non-steel plates)

Of coarse-grained earthenware, or of coarse- grained stoneware; of fine-grained earthenware, whether or not decorated, having a reddish-colored body and a lustrous glaze which, on teapots, may be any color, but which, on other articles, must be mottled, streaked or solidly colored brown to black with metallic oxide or salt

Of earthenware, whether or not decorated, having a reddish-colored body and a lustrous glaze, and mottled, streaked or solidly colored brown to black with metallic oxide or salt

Glassware decorated with metal flecking, glass pictorial scenes or glass thread- or ribbon-like effects, any of the foregoing embedded or introduced into the body of the glassware prior to its solidification; millefiori glassware; glassware colored prior to solidification, and characterized by random distribution of numerous bubbles, seeds or stones, throughout the mass of the glass

Coated with metal

Base metals clad with silver, not further worked than semi- manufactured

Base metals or silver, clad with gold, not further worked than semimanufactured

Grain and nuggets of the metal platinum

Sponge of the metal platinum

Base metals, silver or gold, clad with platinum, not further worked than semimanufactured

Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal other than goods of heading 8549:

Ash containing precious metal or precious metal compounds

Of gold, including metal clad with gold but excluding sweepings containing other precious metals

Of platinum, including metal clad with platinum but excluding sweepings containing other precious metals

Articles of jewelry and parts thereof, of precious metal or of metal clad with precious metal:

Of silver, whether or not plated or clad with other precious metal:

Of other precious metal, whether or not plated or clad with precious metal:

Of base metal clad with precious metal:

Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or of metal clad with precious metal:

Of silver, whether or not plated or clad with other precious metal:

Of other precious metal whether or not plated or clad with precious metal

Of base metal clad with precious metal

Other articles of precious metal or of metal clad with precious metal:

Articles of precious metal, in rectangular or near rectangular shapes, containing 99.5 percent or more by weight of a precious metal and not otherwise marked or decorated than with weight, purity, or other identifying information

Of gold, including metal clad with gold

Of silver, including metal clad with silver

Not coated or plated with metal and not clad

Electrolytically coated or plated with base metal

Plated or coated with other base metals:

Sheet-metal roofing, siding, flooring and roof drainage equipment

Covered with textile or other non- metallic material

Covered with textile or other nonmetallic material

Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:

Expanded metal

Coated or plated with precious metal

Coated or plated with precious metal

Coated or plated with precious metal

Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material

Coated or plated with metal

Not coated or plated with metal

Coated or plated with metal

Not coated or plated with metal

Muntz or yellow metal bolts

Coated or plated with precious metals

Coated or plated with precious metal

Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy:

Nickel oxide sinters and other intermediate products of nickel metallurgy

Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment

Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material

Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal

Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap:

Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders:

Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap:

Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:

Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:

Straight saw blades, for working metal:

Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:

Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:

Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:

Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:

Dies for drawing or extruding metal, and parts thereof

Suitable for cutting metal, and parts thereof

Not suitable for cutting metal, and parts thereof

Stamping dies not suitable for cutting metal

Suitable for cutting metal, and parts thereof

Router bits not suitable for cutting metal

Suitable for cutting metal, and parts thereof

Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:

For metal working, and parts thereof

Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines

Of sintered metal carbides

Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:

Handles of base metal:

Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:

Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:

Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:

Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:

Sets of assorted articles containing at least one article plated with precious metal

Plated with precious metal:

With base metal (except stainless steel) or nonmetal handles

Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:

Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:

Coated or plated with precious metal

Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal

Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 9403

Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:

Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:

Plated with precious metal, and parts thereof

Flexible tubing of base metal, with or without fittings:

Of other base metal:

Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:

Beads and spangles of base metal

Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:

Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405

Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:

Coated electrodes of base metal, for electric arc-welding

Cored wire of base metal, for electric arc-welding

Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:

Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals

Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof:

Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof:

For working metal

For working metal

For working metal

For working metal

For working metal

For working metal

Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal:

Lathes (including turning centers) for removing metal:

Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458:

Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461:

Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included:

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above:

Other machine tools for working metal or cermets, without removing material:

For metalworking machine tools for cutting, grinding or finishing gears

Of metalworking machine tools for cutting gears

Of metalworking machine tools for grinding or finishing gears

For metalworking machine tools for cutting, grinding or finishing gears

Of metalworking machine tools for cutting gears

Of metalworking machine tools for grinding or finishing gears

Suitable for metal working

Suitable for metal working

Suitable for metal working

For treating metal, including electric wire coil-winders

Of machines or mechanical appliances for treating metal

Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:

Molding boxes for metal foundry

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals:

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal

By metal deposit

Of metal

Nickel-metal hydride batteries

Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets; parts thereof:

Cylindrical leadless resistors (including metal film, metal oxide and thick cement film)

Other (including metal film, metal oxide and thick cement film)

For the goods of subheading 8533.40, of ceramic or metallic materials, electrically or mechanically reactive to changes in temperature

Other, for the articles of subheading 8535.90.40, 8536.30.40 or 8536.50.40, of ceramic or metallic materials, electrically or mechanically reactive to changes in temperature

Mercury or sodium vapor lamps; metal halide lamps

Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes:

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during molding solely for the purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material:

With hulls of metal

Tubular metal needles and needles for sutures and parts and accessories thereof

Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics), and parts and accessories thereof:

Machines and appliances for testing metals

Of machines and appliances for testing metals

Wrist watches, pocket watches and other watches, including stop watches, with case of precious metal or of metal clad with precious metal:

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

Cases of precious metal or of metal clad with precious metal

Cases of base metal, whether or not gold- or silver-plated:

Of precious metal or of metal clad with precious metal

Cases of metal

Of precious metal or of metal clad with precious metal

Of base metal, whether or not gold- or silver-plated:

Other metal furniture

Floor-standing, metal-top ironing boards

Of metal

Of base metal, not covered with textile material

Fitted with chain scoops of base metal

Measuring less than 30 mm in width, permanently put up in plastic or metal cartridges (whether or not containing spools) of a kind used in typewriters, automatic data processing or other machines

Of precious metal (except silver), of precious or semiprecious stones or of such metal and such stones

Of metal

Any article of metal (as defined in U.S. note 3(e) of this subchapter) manufactured in the United States or subjected to a process of manufacture in the United States, if exported for further processing, and if the exported article as processed outside the United States, or the article which results from the processing outside the United States, is returned to the United States for further processing

Articles of metal (including medals, trophies and prizes), bestowed upon him abroad, as honorary distinctions, by foreign countries or citizens of foreign countries

Articles of metal (including medals, trophies and prizes), for bestowal on persons in the United States, as honorary distinctions, by foreign countries or citizens of foreign countries

Dioxosilane (Silicon dioxide amorphous) (CAS No. 7631-86-9) entirely spherical micro-spheres of mean particle size of 0.005 mm or smaller, uniform particle size with a uniformity coefficient of 1.65 or less, trace metal impurities less than 70 ppm, specific electrical resistance of 50,000 Ohm cm (provided for in subheading 2811.22.10)

Dioxosilane (Silicon dioxide amorphous) (CAS No. 7631-86-9) entirely spherical micro-spheres of mean particle size of between 0.007 and 0.020 mm, uniform particle size with a uniformity coefficient of 1.65 or less, trace metal impurities less than 70 ppm, specific electrical resistance of 50,000 Ohm cm (provided for in subheading 2811.22.10)

Entirely spherical silicon dioxide micro-spheres, certified by the importer as having mean particle size of 3 to 18 micrometers (µm), linseed oil absorption 150 to 400 ml/g, microbial count less than 100 cfu/g, mold count less than 100 cfu/g, heavy metals less than 20 ppm, surface area 300 to 800 m²/g and pore volume of 0.8 to 2.5 ml/g (CAS No. 7631-86-9) (provided for in subheading 2811.22.10)

Pans or inserts of plastics, of a type designed for pet crates of metal wire as inserts to create a solid interior surface (provided for in subheading 3924.90.56)

Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)

Textile bags of woven fabric of polyester and coated with thermoplastic polyurethane, each pleated and attached to a ring of plastics and/or metal with internal threads, with a washer and a plastic cap with external threads that screws into the ring to form an expandable circular shaped bag, designed to hold ice and/or cold water (provided for in subheading 6307.90.98)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6402.99.33)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $27/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)

Footwear for other persons, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $18/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported); the foregoing not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.99.33)

Work footwear for men, with outer soles of rubber or plastics and uppers of leather, not covering the ankle, incorporating a protective toe cap of materials other than metal (provided for in subheading 6403.99.60)

Work footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of leather, the foregoing not covering the ankle, incorporating a protective toe cap of materials other than metal, valued over $2.50 per pair (provided for in subheading 6403.99.90)

Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $12/pair, incorporating a protective toe cap of materials other than metal (provided for in subheading 6404.19.90)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring at least 15.2 cm but not over 20.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring over 20.4 cm but not over 25.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Pins and metal inserts of iron, fully plated in gold, silver or bronze color, engraved or shaped to memorialize current year, replicate school mascots or symbolize academic, sport, fine arts and guard achievements, such pins or inserts valued not more than $0.20 each (provided for in subheading 7117.19.90)

Ferroboron to be used for manufacturing amorphous metal strip (provided for in subheading 7202.99.80)

Belts and bandoliers of iron or steel, not coated or plated with precious metal, the foregoing presented with or without buckle (provided for in subheading 7326.90.86)

Rotary or fixed cutter drill bits, each with cutting part of precious or semiprecious stones (natural, synthetic or reconstructed) on a substrate of base metal or metal carbide mounted to a base metal body, the foregoing designed for use with rock drilling and earth boring tools of heading 8430 (provided for in subheading 8207.19.60)

Padlocks of base metal, of cylinder or pin tumbler construction, each measuring over 3.8 cm but not over 6.4 cm in width, not put up for retail sale (provided for in subheading 8301.10.80)

Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30)

Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)

Miter sawing machines, power operated, not numerically controlled, for working metal, with safety cut off switch (provided for in subheading 8461.50.80)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and a door with exterior metal handle (provided for in subheading 8516.50.00)

Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)

Electrothermic painted metal dome-shaped kettles, of a kind used for domestic purposes, each with a circular thermometer display and a base containing a temperature control lever and power button (provided for in subheading 8516.79.00)

Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic hot oil popcorn poppers of a kind used for domestic purposes, each with rotating metal wire stirring sticks and mechanical tumbler action (provided for in subheading 8516.79.00)

Electric light emitting diode (LED) lighting fittings, of base metal other than of brass, whether ceiling (hanging) or wall mounted, each with LED light source concealed above a quartz cylinder and designed to create a total internal reflection (provided for in subheading 9405.10.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with interchangeable mounting options including bases, clamps or other mounts (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with ball joints to allow multiple positions of the lamp head relative to the base (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each incorporating a reflector designed to reflect light from the LED in the stem of the lamp (provided for in subheading 9405.20.60)

Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)

Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60)

Olives, prepared or preserved, in brine, not ripe and not pitted or stuffed, not green in color and not packed in airtight containers of glass, metal, or glass and metal (provided for in subheading 2005.70.75)

In airtight containers of glass or metal

Natural sands of all kinds, whether or not colored, other than metalbearing sands of chapter 26:

Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast; shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading 2515 or 2516, whether or not heat-treated:

Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast, shingle and flint, whether or not heat-treated

Other metal content

Precious metal ores and concentrates:

Other precious metal content

Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds:

Containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metalsor for the manufacture of their chemical compounds:

Alkali or alkaline-earth metals; rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed; mercury:

Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed

Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides:

Silicates; commercial alkali metal silicates:

Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals:

Colloidal precious metals

Uranium metal

Uranium metal

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium, or of mixtures of these metals:

Containing lanthanum as the predominant metal

Containing yttrium or scandium as the predominant metal

Containing yttrium or scandium as the predominant metal

Containing lanthanum as the predominant metal

Phosphides, whether or not chemically defined, excluding ferrophosphorous; other inorganic compounds (including distilled or conductivity water and water of similar purity); liquid air (whether or not rare gases have been removed); compressed air; amalgams, other than amalgams of precious metals:

Of other metals or nonmetals

Pigments (including metallic powders and flakes) dispersed in nonaqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other coloring matter put up in forms or packings for retail sale:

Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading 3404:

Polishes and similar preparations for coachwork, other than metal polishes

Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods:

Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materials

With precious metal or precious metal compounds as the active substance

Nonagglomerated metal carbides mixed together or with metallic binders

Mixtures of dibromo neopentyl glycol; Polydibromophenylene oxide; Tetrabromobisphenol-A-carbonate oligomers; and Electroplating chemical and electroless plating solutions and other materials for printed circuit boards, plastics and metal finishings

Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids

Reinforced with metal

Ice bags; douche bags, enema bags, hot water bottles, and fittings therefor; invalid and similar nursing cushions; dress shields; pessaries; prophylactics; bulbs for syringes; syringes (other than hypodermic syringes) and fittings therefor, not in part of glass or metal

Reinforced only with metal

Chamois (including combination chamois) leather; patent leather and patent laminated leather; metallized leather:

Patent leather and patent laminated leather; metallized leather:

Wholly or partly covered with flock, gelatin, metal or metal solutions

Mixed mainly or solely with artificial filaments or metalized yarn (620)

Mixed mainly or solely with artificial filaments or metalized yarn (620)

Mixed mainly or solely with artificial filaments or metalized yarns (620)

Mixed mainly or solely with synthetic filaments or metalized yarn (618)

Metalized yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal:

Metal coated or metal laminated man-made filament or strip or the like, ungimped, and untwisted or with twist of less than 5 turns per meter

Of metalized yarn (229)

Woven fabrics of metal thread and woven fabrics of metalized yarn of heading 5605, of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere specified or included (229)

Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material:

Footwear incorporating a protective metal toe-cap

Other footwear, incorporating a protective metal toe-cap:

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Segments for circular sawblades, consisting of diamond agglomerated with metal

Articles consisting of a continuous rim segment of diamond agglomerated with metal, attached to circular plates of steel (whether or not attached to non-steel plates)

Articles consisting of multiple segments of diamond agglomerated with metal, attached to circular plates of steel, without cutting parts (whether or not attached to non-steel plates)

Of coarse-grained earthenware, or of coarse- grained stoneware; of fine-grained earthenware, whether or not decorated, having a reddish-colored body and a lustrous glaze which, on teapots, may be any color, but which, on other articles, must be mottled, streaked or solidly colored brown to black with metallic oxide or salt

Of earthenware, whether or not decorated, having a reddish-colored body and a lustrous glaze, and mottled, streaked or solidly colored brown to black with metallic oxide or salt

Glassware decorated with metal flecking, glass pictorial scenes or glass thread- or ribbon-like effects, any of the foregoing embedded or introduced into the body of the glassware prior to its solidification; millefiori glassware; glassware colored prior to solidification, and characterized by random distribution of numerous bubbles, seeds or stones, throughout the mass of the glass

Coated with metal

Base metals clad with silver, not further worked than semi- manufactured

Base metals or silver, clad with gold, not further worked than semimanufactured

Grain and nuggets of the metal platinum

Sponge of the metal platinum

Base metals, silver or gold, clad with platinum, not further worked than semimanufactured

Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal other than goods of heading 8549:

Ash containing precious metal or precious metal compounds

Of gold, including metal clad with gold but excluding sweepings containing other precious metals

Of platinum, including metal clad with platinum but excluding sweepings containing other precious metals

Articles of jewelry and parts thereof, of precious metal or of metal clad with precious metal:

Of silver, whether or not plated or clad with other precious metal:

Of other precious metal, whether or not plated or clad with precious metal:

Of base metal clad with precious metal:

Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or of metal clad with precious metal:

Of silver, whether or not plated or clad with other precious metal:

Of other precious metal whether or not plated or clad with precious metal

Of base metal clad with precious metal

Other articles of precious metal or of metal clad with precious metal:

Articles of precious metal, in rectangular or near rectangular shapes, containing 99.5 percent or more by weight of a precious metal and not otherwise marked or decorated than with weight, purity, or other identifying information

Of gold, including metal clad with gold

Of silver, including metal clad with silver

Not coated or plated with metal and not clad

Electrolytically coated or plated with base metal

Plated or coated with other base metals:

Covered with textile or other non- metallic material

Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:

Expanded metal

Coated or plated with precious metal

Coated or plated with precious metal

Coated or plated with precious metal

Coated or plated with metal

Not coated or plated with metal

Coated or plated with metal

Not coated or plated with metal

Muntz or yellow metal bolts

Coated or plated with precious metals

Coated or plated with precious metal

Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy:

Nickel oxide sinters and other intermediate products of nickel metallurgy

Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal

Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap:

Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders:

Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap:

Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:

Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:

Straight saw blades, for working metal:

Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:

Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:

Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:

Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:

Dies for drawing or extruding metal, and parts thereof

Suitable for cutting metal, and parts thereof

Not suitable for cutting metal, and parts thereof

Stamping dies not suitable for cutting metal

Suitable for cutting metal, and parts thereof

Router bits not suitable for cutting metal

Suitable for cutting metal, and parts thereof

Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:

For metal working, and parts thereof

Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines

Of sintered metal carbides

Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:

Handles of base metal:

Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:

Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:

Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:

Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:

Sets of assorted articles containing at least one article plated with precious metal

Plated with precious metal:

With base metal (except stainless steel) or nonmetal handles

Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:

Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:

Coated or plated with precious metal

Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal

Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 9403

Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:

Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:

Plated with precious metal, and parts thereof

Flexible tubing of base metal, with or without fittings:

Of other base metal:

Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:

Beads and spangles of base metal

Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:

Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405

Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:

Coated electrodes of base metal, for electric arc-welding

Cored wire of base metal, for electric arc-welding

Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:

Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals

Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof:

Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof:

For working metal

For working metal

For working metal

For working metal

For working metal

For working metal

Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal:

Lathes (including turning centers) for removing metal:

Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458:

Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461:

Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included:

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above:

Other machine tools for working metal or cermets, without removing material:

For metalworking machine tools for cutting, grinding or finishing gears

Of metalworking machine tools for cutting gears

Of metalworking machine tools for grinding or finishing gears

For metalworking machine tools for cutting, grinding or finishing gears

Of metalworking machine tools for cutting gears

Of metalworking machine tools for grinding or finishing gears

Suitable for metal working

Suitable for metal working

Suitable for metal working

For treating metal, including electric wire coil-winders

Of machines or mechanical appliances for treating metal

Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:

Molding boxes for metal foundry

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals:

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal

By metal deposit

Of metal

Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets; parts thereof:

Cylindrical leadless resistors (including metal film, metal oxide and thick cement film)

Other (including metal film, metal oxide and thick cement film)

For the goods of subheading 8533.40, of ceramic or metallic materials, electrically or mechanically reactive to changes in temperature

Other, for the articles of subheading 8535.90.40, 8536.30.40 or 8536.50.40, of ceramic or metallic materials, electrically or mechanically reactive to changes in temperature

Mercury or sodium vapor lamps; metal halide lamps

Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes:

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during molding solely for the purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material:

With hulls of metal

Tubular metal needles and needles for sutures and parts and accessories thereof

Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics), and parts and accessories thereof:

Machines and appliances for testing metals

Of machines and appliances for testing metals

Wrist watches, pocket watches and other watches, including stop watches, with case of precious metal or of metal clad with precious metal:

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

Cases of precious metal or of metal clad with precious metal

Cases of base metal, whether or not gold- or silver-plated:

Of precious metal or of metal clad with precious metal

Cases of metal

Of precious metal or of metal clad with precious metal

Of base metal, whether or not gold- or silver-plated:

Other metal furniture

Floor-standing, metal-top ironing boards

Of metal

Of base metal, not covered with textile material

Fitted with chain scoops of base metal

Measuring less than 30 mm in width, permanently put up in plastic or metal cartridges (whether or not containing spools) of a kind used in typewriters, automatic data processing or other machines

Of precious metal (except silver), of precious or semiprecious stones or of such metal and such stones

Of metal

Any article of metal (as defined in U.S. note 3(e) of this subchapter) manufactured in the United States or subjected to a process of manufacture in the United States, if exported for further processing, and if the exported article as processed outside the United States, or the article which results from the processing outside the United States, is returned to the United States for further processing

Articles of metal (including medals, trophies and prizes), bestowed upon him abroad, as honorary distinctions, by foreign countries or citizens of foreign countries

Articles of metal (including medals, trophies and prizes), for bestowal on persons in the United States, as honorary distinctions, by foreign countries or citizens of foreign countries

Dioxosilane (Silicon dioxide amorphous) (CAS No. 7631-86-9) entirely spherical micro-spheres of mean particle size of 0.005 mm or smaller, uniform particle size with a uniformity coefficient of 1.65 or less, trace metal impurities less than 70 ppm, specific electrical resistance of 50,000 Ohm cm (provided for in subheading 2811.22.10)

Dioxosilane (Silicon dioxide amorphous) (CAS No. 7631-86-9) entirely spherical micro-spheres of mean particle size of between 0.007 and 0.020 mm, uniform particle size with a uniformity coefficient of 1.65 or less, trace metal impurities less than 70 ppm, specific electrical resistance of 50,000 Ohm cm (provided for in subheading 2811.22.10)

Entirely spherical silicon dioxide micro-spheres, certified by the importer as having mean particle size of 3 to 18 micrometers (µm), linseed oil absorption 150 to 400 ml/g, microbial count less than 100 cfu/g, mold count less than 100 cfu/g, heavy metals less than 20 ppm, surface area 300 to 800 m²/g and pore volume of 0.8 to 2.5 ml/g (CAS No. 7631-86-9) (provided for in subheading 2811.22.10)

Pans or inserts of plastics, of a type designed for pet crates of metal wire as inserts to create a solid interior surface (provided for in subheading 3924.90.56)

Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)

Textile bags of woven fabric of polyester and coated with thermoplastic polyurethane, each pleated and attached to a ring of plastics and/or metal with internal threads, with a washer and a plastic cap with external threads that screws into the ring to form an expandable circular shaped bag, designed to hold ice and/or cold water (provided for in subheading 6307.90.98)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6402.99.33)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $27/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)

Footwear for other persons, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $18/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)

Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported); the foregoing not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.99.33)

Work footwear for men, with outer soles of rubber or plastics and uppers of leather, not covering the ankle, incorporating a protective toe cap of materials other than metal (provided for in subheading 6403.99.60)

Work footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of leather, the foregoing not covering the ankle, incorporating a protective toe cap of materials other than metal, valued over $2.50 per pair (provided for in subheading 6403.99.90)

Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $12/pair, incorporating a protective toe cap of materials other than metal (provided for in subheading 6404.19.90)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring at least 15.2 cm but not over 20.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring over 20.4 cm but not over 25.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Pins and metal inserts of iron, fully plated in gold, silver or bronze color, engraved or shaped to memorialize current year, replicate school mascots or symbolize academic, sport, fine arts and guard achievements, such pins or inserts valued not more than $0.20 each (provided for in subheading 7117.19.90)

Ferroboron to be used for manufacturing amorphous metal strip (provided for in subheading 7202.99.80)

Belts and bandoliers of iron or steel, not coated or plated with precious metal, the foregoing presented with or without buckle (provided for in subheading 7326.90.86)

Rotary or fixed cutter drill bits, each with cutting part of precious or semiprecious stones (natural, synthetic or reconstructed) on a substrate of base metal or metal carbide mounted to a base metal body, the foregoing designed for use with rock drilling and earth boring tools of heading 8430 (provided for in subheading 8207.19.60)

Padlocks of base metal, of cylinder or pin tumbler construction, each measuring over 3.8 cm but not over 6.4 cm in width, not put up for retail sale (provided for in subheading 8301.10.80)

Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30)

Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)

Miter sawing machines, power operated, not numerically controlled, for working metal, with safety cut off switch (provided for in subheading 8461.50.80)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and a door with exterior metal handle (provided for in subheading 8516.50.00)

Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)

Electrothermic painted metal dome-shaped kettles, of a kind used for domestic purposes, each with a circular thermometer display and a base containing a temperature control lever and power button (provided for in subheading 8516.79.00)

Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic hot oil popcorn poppers of a kind used for domestic purposes, each with rotating metal wire stirring sticks and mechanical tumbler action (provided for in subheading 8516.79.00)

Electric light emitting diode (LED) lighting fittings, of base metal other than of brass, whether ceiling (hanging) or wall mounted, each with LED light source concealed above a quartz cylinder and designed to create a total internal reflection (provided for in subheading 9405.10.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with interchangeable mounting options including bases, clamps or other mounts (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with ball joints to allow multiple positions of the lamp head relative to the base (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each incorporating a reflector designed to reflect light from the LED in the stem of the lamp (provided for in subheading 9405.20.60)

Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)

Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60)

Olives, prepared or preserved, in brine, not ripe and not pitted or stuffed, not green in color and not packed in airtight containers of glass, metal, or glass and metal (provided for in subheading 2005.70.75)