HTS CODE | Harmonized Tariff Schedule

Simple Tool for searching Harmonized Tariff Schedule of the United States.

Search Results:761
0505.10.00
Feathers of a kind used for stuffing; down
0510.00
Ambergris, castoreum, civet and musk; cantharides; bile, whether or not dried; glands and other animal products used in the preparation of pharmaceutical products, fresh, chilled, frozen or otherwise provisionally preserved:
0510.00.40.40
Cantharides; glands (other than pancreas), organs and other animal products used in the preparation of pharmaceutical products
0511.99.30
Products chiefly used as food for animals or as ingredients in such food
0712.90.85.50
Sweet corn seeds of a kind used for sowing
0713.10.10.00
Seeds of a kind used for sowing
0713.20.10.00
Seeds of a kind used for sowing
0713.31.10.00
Seeds of a kind used for sowing
0713.32.10.00
Seeds of a kind used for sowing
0713.33.10
Seeds of a kind used for sowing
0713.34.10.00
Of a kind used for sowing
0713.39.11
Seeds of a kind used for sowing
0713.40.10.00
Seeds of a kind used for sowing
0713.50.10.00
Seeds of a kind used for sowing
0713.60.10.00
Of a kind used for sowing
0713.90.11.00
Seeds of a kind used for sowing
1002.10.00.10
Seeds of a kind used for sowing
1108.11.00.10
For food use
1108.12.00.10
For food use
1108.19.00.10
Cereal starches for non-food use
1109.00.10.00
To be used as animal feed
1201.90.00.05
Seeds of a kind used as oil stock
1202.41.05.20
For use as oil stock
1202.41.40.20
For use as oil stock
1202.41.80.20
For use as oil stock
1202.42.05.20
For use as oil stock
1202.42.40.20
For use as oil stock
1202.42.80.20
For use as oil stock
1205.10.00.20
For use as oil stock
1205.90.00.20
For use as oil stock
1206.00.00.20
For use as oil stock
1209
Seeds, fruits and spores of a kind used for sowing:
1211
Plants and parts of plants (including seeds and fruits), of a kind used primarily in perfumery, in pharmacy or for insecticidal, fungicidal or similar purposes, fresh, chilled, frozen or dried, whether or not cut, crushed or powdered:
1212
Locust beans, seaweeds and other algae, sugar beet and sugar cane, fresh, chilled, frozen or dried, whether or not ground; fruit stones and kernels and other vegetable products (including unroasted chicory roots of the variety Cichorium intybus sativum) of a kind used primarily for human consumption, not elsewhere specified or included:
1401
Vegetable materials of a kind used primarily for plaiting (for example, bamboos, rattans, reeds, rushes, osier, raffia, cleaned, bleached or dyed cereal straw, and lime bark):
1404.90.90.20
Canaigre, chestnut, curupay, divi-divi, eucalyptus, gall nuts, hemlock, larch, mangrove, myrobalan, oak, quebracho, sumac, tara, urunday, valonia, wattle and other materials of a kind used primarily in tanning
1507.90.20.00
Pharmaceutical Grade meeting FDA requirements for use in intravenous fat emulsions, valued over $5/kg
1510.00.20.00
Rendered unfit for use as food
1514.91.10.00
Imported to be used in the manufacture of rubber substitutes or lubricating oil
1514.99.10.00
Imported to be used in the manufacture of rubber substitutes or lubricating oil
1701.13.20.00
Other sugar to be used for the production (other than by distillation) of polyhydric alcohols, except polyhydric alcohols for use as a substitute for sugar in human food consumption, or to be refined and re-exported in refined form or in sugar-containing products, or to be substituted for domestically produced raw cane sugar that has been or will be exported
1701.14.20.00
Other sugar to be used for the production (other than by distillation) of polyhydric alcohols, except polyhydric alcohols for use as a substitute for sugar in human food consumption, or to be refined and re-exported in refined form or in sugar-containing products, or to be substituted for domestically produced raw cane sugar that has been or will be exported
1905
Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty capsules of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products:
2207.10.60.10
For fuel use
2207.20.00.10
For fuel use
2208.90.05.00
Not fit for use as beverages
2208.90.10.00
Fit for use as beverages
2308.00
Vegetable materials and vegetable waste, vegetable residues and byproducts, whether or not in the form of pellets, of a kind used in animal feeding, not elsewhere specified or included:
2309
Preparations of a kind used in animal feeding:
2401.10.61
To be used in products other than cigarettes
2401.20.31
To be used in products other than cigarettes
2401.20.83
To be used in products other than cigarettes
2403.19.30
To be used in products other than cigarettes
2403.91.20.00
Suitable for use as wrapper tobacco
2403.91.43
To be used in products other than cigarettes
2403.99.30
To be used in products other than cigarettes
2517
Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast; shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading 2515 or 2516, whether or not heat-treated:
2517.10.00
Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast, shingle and flint, whether or not heat-treated
2521.00.00.00
Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement
2620.60
Containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metalsor for the manufacture of their chemical compounds:
2620.60.10.00
Of a kind used only for the extraction of arsenic or the manufacture of its chemical compounds
2704.00.00.11
Coke larger than 100 mm (4 inches) in maximum diameter and at least 50 percent of which is retained on a 100-mm (4-inch) sieve after drop shatter testing pursuant to ASTM D 3038, of a kind used in foundries
2905.11.10.00
Imported only for use in producing synthetic natural gas (SNG) or for direct use as a fuel
2905.11.20.10
Imported for use in chemical production, including production of aldehydes, plastics, olefins and resins
2905.11.20.15
For use in wastewater treatment
2918.21.10.00
Suitable for medicinal use
2918.23.10.00
Salol (Phenyl salicylate) suitable for medicinal use
2923.20.10.00
Purified egg phospholipids, pharmaceutical grade meeting requirements of the U.S. Food and Drug Administration, for use in intravenous fat emulsion
2930.20.20.10
Products used principally for rubber processing
2930.20.90.20
Products used principally for rubber processing
2930.90.91.30
Products used principally for rubber processing
2933.19.30.10
Couplers, for use in color negative photographic paper
2933.59.21.00
Antihistamines, including those principally used as anti-nauseants
2933.69.60.30
Products used principally for rubber processing
2936
Provitamins and vitamins, natural or reproduced by synthesis (including natural concentrates), derivatives thereof used primarily as vitamins, and intermixtures of the foregoing, whether or not in any solvent:
2937
Hormones, prostaglandins, thromboxanes and leukotrienes, natural or reproduced by synthesis; derivatives and structural analogues thereof, including chain modified polypeptides, used primarily as hormones:
3001
Glands and other organs for organotherapeutic uses, dried, whether or not powdered; extracts of glands or other organs or of their secretions for organotherapeutic uses; heparin and its salts; other human or animal substances prepared for therapeutic or prophylactic uses, not elsewhere specified or included:
3002
Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera, other blood fractions and immunological products, whether or not modified or obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products:
3003
Medicaments (excluding goods of heading 3002, 3005 or 3006) consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses, not put up in measured doses or in forms or packings for retail sale:
3004
Medicaments (excluding goods of heading 3002, 3005 or 3006) consisting of mixed or unmixed products for therapeutic or prophylactic uses, put up in measured doses (including those in the form of transdermal administration systems) or in forms or packings for retail sale:
3004.10.10.10
For veterinary use
3004.10.50.10
For veterinary use
3004.20.00.10
For veterinary use
3004.39.00.10
For veterinary use
3004.49.00.05
For veterinary use
3004.50.50.05
For veterinary use
3004.90.92.03
For veterinary use
3006.70.00.00
Gel preparations designed to be used in human or veterinary medicine as a lubricant for parts of the body for surgical operations or physical examinations or as a coupling agent between the body and medical instruments
3006.91.00.00
Appliances identifiable for ostomy use
3204
Synthetic organic coloring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic coloring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined:
3204.17.20.00
Copper phthalocyanine ([Phthalocyanato(2-)]- copper), not ready for use as a pigment
3204.20
Synthetic organic products of a kind used as fluorescent brightening agents:
3206
Other coloring matter; preparations as specified in note 3 to this chapter, other than those of heading 3203, 3204 or 3205; inorganic products of a kind used as luminophores, whether or not chemically defined:
3206.50.00.00
Inorganic products of a kind used as luminophores
3207
Prepared pigments, prepared opacifiers and prepared colors, vitrifiable enamels and glazes, engobes (slips), liquid lustres and similar preparations, of a kind used in the ceramic, enamelling or glass industry; glass frit and other glass, in the form of powder, granules or flakes:
3210.00.00.00
Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather
3212
Pigments (including metallic powders and flakes) dispersed in nonaqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other coloring matter put up in forms or packings for retail sale:
3302
Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages:
3302.10
Of a kind used in the food or drink industries:
3302.90.10.10
Perfume oil mixtures and blends, consisting of products ready for use as finished perfume bases
3302.90.20.10
Perfume oil mixtures and blends, consisting of products ready for use as finished perfume bases
3305
Preparations for use on the hair:
3306
Preparations for oral or dental hygiene, including denture fixative pastes and powders; yarn used to clean between the teeth (dental floss), in individual retail packages:
3306.20.00.00
Yarn used to clean between the teeth (dental floss)
3401
Soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, molded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent:
3401.11
For toilet use (including medicated products):
3403
Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, antirust or anticorrosion preparations and mold release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 percent or more by weight of petroleum oils or oils obtained from bituminous minerals:
3407
Modeling pastes, including those put up for children's amusement; preparations known as "dental wax" or as "dental impression compounds", put up in sets, in packings for retail sale or in plates, horseshoe shapes, sticks or similar forms; other preparations for use in dentistry, with a basis of plaster (of calcined gypsum or calcium sulfate):
3506
Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg:
3506.10
Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg:
3506.91.10.00
Optically clear free-film adhesives and optically clear curable liquid adhesives of a kind used solely or principally for the manufacture of flat panel displays or touch-sensitive screen panels
3606.10.00.00
Liquid or liquefied-gas fuels in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not exceeding 300 cm3
3703.20.30.30
For pictorial use (continuous tone)
3706.10.30.00
Sound recordings on motion-picture film suitable for use in connection with motion-picture exhibits
3707
Chemical preparations for photographic uses (other than varnishes, glues, adhesives and similar preparations); unmixed products for photographic uses, put up in measured portions or put up for retail sale in a form ready for use:
3707.10.00.05
For use in color negative photographic paper
3707.90.32.10
Unsensitized emulsions, for use in color negative photographic paper
3707.90.32.20
Couplers, for use in color negative photographic paper
3707.90.32.30
Coupler dispersions, for use in color negative photographic paper
3707.90.60.00
Unmixed products for photographic uses, put up in measured portions or put up for retail sale in a form ready for use
3809
Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included:
3809.91.00.00
Of a kind used in the textile or like industries
3809.92
Of a kind used in the paper or like industries:
3809.93
Of a kind used in the leather or like industries:
3810
Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods:
3811
Antiknock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:
3818.00.00
Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics
3824.99.28.40
Mixtures of a kind containing nicotine used in personal electric or electronic vaporizing devices
3824.99.92.80
Mixtures of a kind containing nicotine used in personal electric or electronic vaporizing devices
3824.99.92.86
Mixtures of a kind containing magnesium used as a desulfurization reagent
3920.20.00.15
Strip put up in packaging for use as decorative or gift-wrapping ribbon
3926.90.30.00
Parts for yachts or pleasure boats of heading 8903; parts of canoes, racing shells, pneumatic craft and pleasure boats which are not of a type designed to be principally used with motors or sails
3926.90.85.00
Fasteners, in clips suitable for use in a mechanical attaching device
3926.90.94.00
Cards, not punched, suitable for use as, or in making, jacquard cards; Jacquard cards and jacquard heads for power-driven weaving machines, and parts thereof; and Transparent sheeting of plastics containing 30 percent or more by weight of lead
3926.90.99.25
Reflective triangular warning signs for road use
4011.10
Of a kind used on motor cars (including station wagons and racing cars):
4011.20
Of a kind used on buses or trucks:
4011.20.10.25
For use on a rim measuring 40.6 cm or more in diameter
4011.20.50.30
For use on a rim measuring 40.6 cm or more in diameter
4011.30.00
Of a kind used on aircraft
4011.30.00.10
For use in civil aircraft
4011.40.00.00
Of a kind used on motorcycles
4011.50.00.00
Of a kind used on bicycles
4011.70.00
Of a kind used on agricultural or forestry vehicles and machines
4011.80
Of a kind used on construction, mining or industrial handling vehicles and machines:
4011.90.10.10
Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications
4011.90.20.10
Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications
4011.90.80.10
Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications
4012
Retreaded or used pneumatic tires of rubber; solid or cushion tires, tire treads and tire flaps, of rubber:
4012.11
Of a kind used on motor cars (including station wagons and racing cars):
4012.12
Of a kind used on buses or trucks:
4012.13.00
Of a kind used on aircraft
4012.13.00.10
For use in civil aircraft
4012.20.10.10
For use in civil aircraft
4012.20.15.00
Of a kind used on vehicles, including tractors, for the on-highway transport of passengers or goods
4012.20.60.00
Of a kind used on vehicles, including tractors, for the on-highway transport of passengers or goods, or on vehicles of heading 8705
4013.10.00
Of a kind used on motor cars (including station wagons and racing cars), buses or trucks
4013.20.00.00
Of a kind used on bicycles
4016.93.10
Of a kind used in the automotive goods of chapter 87
4016.99.03.00
Containers, with or without their closures, of a kind used for the packing, transporting or marketing of merchandise
4016.99.30.00
Vibration control goods of a kind used in the vehicles of headings 8701 through 8705
4016.99.55.00
Vibration control goods of a kind used in the vehicles of headings 8701 through 8705
4203.21
Specially designed for use in sports:
4206.00.13.00
If imported for use in the manufacture of sterile surgical sutures
4301
Raw furskins (including heads, tails, paws and other pieces or cuttings, suitable for furriers' use), other than raw hides and skins of heading 4101, 4102 or 4103:
4301.90.00.00
Heads, tails, paws and other pieces or cuttings, suitable for furriers' use
4411.92.30.00
Tileboard which has been continuously worked along any of its edges and is dedicated for use in the construction of walls, ceilings or other parts of buildings
4415.10.60.00
Containers designed for use in the harvesting of fruits and vegetables
4415.20.40.00
Containers designed for use in the harvesting of fruits and vegetables
4802
Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non perforated punch-cards and punch tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; hand-made paper and paperboard:
4802.20
Paper and paperboard of a kind used as a base for photo-sensitive, heat-sensitive or electro-sensitive paper or paperboard:
4802.20.20.00
Basic paper to be sensitized for use in photography
4802.54.50.00
Basic paper to be sensitized for use in photography
4802.55.60.00
Basic paper to be sensitized for use in photography
4802.56.60.00
Basic paper to be sensitized for use in photography
4802.58.50.00
Basic paper to be sensitized for use in photography
4802.61.50.00
Basic paper to be sensitized for use in photography
4802.62.50.00
Basic paper to be sensitized for use in photography
4803.00
Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for household or sanitary purposes, cellulose wadding and webs of cellulose fibers, whether or not creped, crinkled, embossed, perforated, surface-colored, surface decorated or printed, in rolls or sheets:
4810.13.11
Basic paper to be sensitized for use in photography
4810.13.60.00
Basic paper to be sensitized for use in photography
4810.14.11
Basic paper to be sensitized for use in photography
4810.14.60.00
Basic paper to be sensitized for use in photography
4810.19.11.00
Basic paper to be sensitized for use in photography
4810.22.60.00
Basic paper to be sensitized for use in photography
4810.29.60.00
Basic paper to be sensitized for use in photography
4817.20.20.00
Sheets of writing paper, with border gummed or perforated, with or without inserts, prepared for use as combination sheets and envelopes
4818
Toilet paper and similar paper, cellulose wadding or webs of cellulose fibers, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, table napkins, bed sheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibers:
4819
Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibers; box files, letter trays and similar articles, of paper or paperboard of a kind used in offices, shops or the like:
4819.60.00.00
Box files, letter trays, storage boxes and similar articles, of a kind used in offices, shops or the like
4822.10.00.00
Of a kind used for winding textile yarn
4911.91.15.00
Suitable for use in the production of articles of heading 4901
5007.20.00.15
Measuring less than 77 cm in width or less than 77 cm between selvages, with more than 47 warp yarns per cm, of a kind for use in the manufacture of neckties
5007.20.00.55
Measuring less than 77 cm in width or less than 77 cm between selvages, with more than 47 warp yarns per cm, of a kind for use in the manufacture of neckties
5101.11.10.00
Wool for special uses
5101.19.10.00
Wool for special uses
5101.21.10.00
Wool for special uses
5101.29.10.00
Wool for special uses
5102.19.80.00
Fur, prepared for hatters' use
5402.45.10.00
Colored multifilament, untwisted or with a twist of less than 5 turns per meter, measuring not less than 22 decitex per filament, certified by the importer to be used in the manufacture of wigs for dolls
5402.49.11.00
Colored multifilament, of modacrylic, untwisted or with a twist of less than 5 turns per meter, measuring not less than 22 decitex per filament, certified by the importer to be used in the manufacture of wigs for dolls
5503.20.00.15
Bi-component fibers having an outer copolymer sheath that melts at a lower temperature than the core, of a kind used for bonding fibers together
5805.00.10.00
Hand-woven tapestries fit only for use as wall hangings and valued over $215 per square meter
5809.00.00.00
Woven fabrics of metal thread and woven fabrics of metalized yarn of heading 5605, of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere specified or included (229)
5901
Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations:
5901.10
Textile fabrics coated with gum or amylaceous sub- stances, of a kind used for the outer covers of books or the like:
5911
Textile products and articles, for technical uses, specified in note 7 to this chapter:
5911.10
Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, including narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles (weaving beams):
5911.20.10.00
Fabrics principally used for stenciling purposes in screen-process printing
5911.40.00.00
Straining cloth of a kind used in oil presses or the like, including that of human hair
5911.90.00.40
Cords, braids and the like of a kind used in industry as packing or lubricating material
6108.22.10.00
Disposable briefs and panties designed for one-time use
6116.10.08.00
Other gloves, mittens and mitts, all the foregoing specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6116.92.08.00
Other gloves, mittens and mitts, all the fore going specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6116.93.08.00
Other gloves, mittens and mitts, all the fore going specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6116.99.35.00
Other gloves, mittens and mitts, all the fore going specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6210.10.50
Nonwoven disposable apparel designed for use in hospitals, clinics, laboratories or contaminated areas
6210.10.70.00
Disposable briefs and panties designed for one-time use
6216.00.08.00
Other gloves, mittens and mitts, all the foregoing specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6216.00.35.00
Other gloves, mittens and mitts, all the fore- going specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6216.00.46.00
Other gloves, mittens and mitts, all the fore- going specially designed for use in sports, including ski and snowmobile gloves, mittens and mitts
6305
Sacks and bags, of a kind used for the packing of goods:
6401.99.30.00
Designed for use without closures
6405.90.20.00
Disposable footwear, designed for one-time use
6603.20.30.00
For hand-held umbrellas chiefly used for protection against rain
6703.00
Human hair, dressed, thinned, bleached or otherwise worked; wool or other animal hair or other textile materials, prepared for use in making wigs or the like:
6807.90.00.10
Articles of a kind used for roofing or siding
6810.99.00.10
Agglomerated quartz slabs of the type used for countertops
6812.99.00.10
For use in civil aircraft
6813.20.00.10
Articles for use in civil aircraft
6813.20.00.20
Articles for use in civil aircraft:
6813.81.00.10
Articles for use in civil aircraft, with a basis of mineral substances
6813.89.00.10
Articles for use in civil aircraft, with a basis of mineral substances
6909
Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods:
7005.10.40.00
Suitable for use in liquid crystal displays, measuring not over 1.2 mm in thickness and not over 0.8 m2 in area
7005.29.04
Suitable for use in liquid crystal displays
7005.29.14
Suitable for use in liquid crystal displays, measuring not over 0.8 m2 in area
7010
Carboys, bottles, flasks, jars, pots, vials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass:
7011.20.45.00
Monochrome glass envelopes, the foregoing certified by the importer as being for actual use in automatic data processing machine data or graphic display cathode ray tubes
7013
Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018):
7016
Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded glass windows and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms:
7019.12.00.40
Of a kind used in industry as packing or lubricating materials
7019.19.15.40
Of a kind used in industry as packing or lubricating materials (201)
7103.99.10.00
Cut but not set, and suitable for use in the manufacture of jewelry
7104.90.10.00
Cut but not set, and suitable for use in the manufacture of jewelry
7112
Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal:
7113.11.10.00
Rope, curb, cable, chain and similar articles produced in continuous lengths, all the foregoing, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading
7113.19.10.00
Rope, curb, cable, chain and similar articles produced in continuous lengths, all the foregoing, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading
7113.20.10.00
Rope, curb, cable, chain and similar articles produced in continuous lengths, all the foregoing, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading
7114.20.00.40
Articles not elsewhere specified or included, of a type used for household, table or kitchen use; toilet or sanitary ware
7304.31.60.10
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.41.30.15
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.41.60.15
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.49.00.45
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.51.10.00
Suitable for use in the manufacture of ball or roller bearings
7304.59.10.00
Suitable for use in the manufacture of ball or roller bearings
7304.59.20
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7305.20
Casing of a kind used in drilling for oil or gas:
7305.31.20.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7306.30.30.00
Tapered steel pipes and tubes principally used as parts of illuminating articles
7306.30.50.10
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
7306.30.50.28
Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
7306.40.50.15
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
7306.50.30.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7306.50.50.10
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
7308
Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
7310.21.00.25
Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods
7313.00.00.00
Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
7319
Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
7320.10.30.00
To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons
7320.20.50.10
Suitable for use in mattress supports and mattresses of heading 9404
7320.90.50.10
Suitable for use in mattress supports and mattresses of heading 9404
7323.91.50.20
Bakeware (cookware not suitable for stove top use)
7323.92.00.20
Bakeware (cookware not suitable for stove top use)
7323.93.00.35
Bakeware (cookware not suitable for stove top use)
7323.94.00.21
Bakeware (cookware not suitable for stove top use)
7418.10.00.21
Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof
7418.10.00.51
Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof
7419.99.03.00
Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter
7419.99.06.60
Fourdrinier wires, seamed or not seamed, suitable for use in paper- making machines, with fewer than 94 or more wires to the lineal centimeter
7610
Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:
7615.10.20.15
Bakeware (cookware not suitable for stove top use)
7615.10.30.15
Bakeware (cookware not suitable for stove top use)
7615.10.50.20
Bakeware (cookware not suitable for stove top use)
7615.10.71.30
Bakeware (cookware not suitable for stove top use)
7907.00.10.00
Articles of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing and parts thereof of zinc
8007.00.10
Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal
8201
Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:
8201.90
Other handtools of a kind used in agriculture, horticulture or forestry, and parts thereof:
8208.30.00
For kitchen appliances or for machines used by the food industry, and parts thereof
8210.00.00.00
Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof
8214.20.30.00
Cuticle or cornknives, cuticle pushers, nail files, nailcleaners, nail nippers and clippers, all the foregoing used for manicure or pedicure purposes, and parts thereof
8301.20.00
Locks of a kind used on motor vehicles
8301.30.00
Locks of a kind used for furniture
8301.30.00.60
Cam locks and other locks suitable for use with chests, drawers and similar items
8301.40.60.30
Door locks, locksets and other locks suitable for use with interior or exterior doors (except garage, overhead or sliding doors)
8308
Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:
8311
Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:
8404
Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economizers, super-heaters, soot removers, gas recoverers); condensers for steam or other vapor power units; parts thereof:
8404.10.00
Auxiliary plant for use with boilers of heading 8402 or 8403
8407.32.10.00
To be installed in tractors suitable for agricultural use
8407.33.10
To be installed in tractors suitable for agricultural use
8407.34.05
To be installed in tractors suitable for agricultural use
8407.34.35
To be installed in tractors suitable for agricultural use
8408.20
Engines of a kind used for the propulsion of vehicles of chapter 87:
8408.20.10
To be installed in tractors suitable for agricultural use
8409
Parts suitable for use solely or principally with the engines of heading 8407 or 8408:
8409.10.00.40
For use in civil aircraft
8409.91
Suitable for use solely or principally with spark-ignition internal combustion piston engines (including rotary engines):
8411.91.10.60
For use in civil aircraft
8411.99.10.40
For use in civil aircraft
8413.11.00.00
Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages
8413.70.10.00
Stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
8413.91.20.00
Of stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard
8414.30
Compressors of a kind used in refrigerating equipment (including air conditioning):
8414.59.15.00
Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines
8414.59.65.40
Suitable for use with motor vehicles
8415.20.00.00
Of a kind used for persons, in motor vehicles
8419
Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric; parts thereof:
8419.81.50.40
For use in civil aircraft
8419.81.90.40
Of a type used in restaurants, hotels or similar locations
8419.90.95.20
Of an apparatus of a type used in restaurants, hotels or similar locations
8424.89.10.00
Mechanical appliances for projecting, dispersing or spraying, of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8425.41.00.00
Built-in jacking systems of a type used in garages
8428.31.00.00
Specially designed for underground use
8431
Parts suitable for use solely or principally with the machinery of headings 8425 to 8430:
8435
Presses, crushers and similar machinery, used in the manufacture of wine, cider, fruit juices or similar beverages; parts thereof:
8436.80.00.60
Machines for preparing crops for market or for use
8436.99.00.70
Of machines for preparing crops for market or for use
8437
Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery; parts thereof:
8443
Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof:
8443.91
Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442:
8443.91.10.00
Machines for uses ancillary to printing
8445
Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447:
8448
Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles):
8448.11.00.00
Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith
8448.51
Sinkers, needles and other articles used in forming stitches:
8451
Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof:
8454
Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof:
8456.11.70.00
Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing units
8456.12.70.00
Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing
8466
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand:
8466.20.10
For machine tools used in cutting gears
8466.93.96.00
Parts and accessories of machine tool of subheadings 8456.10, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines
8467.19.50.60
Designed for use in construction or mining
8467.89.50.60
Other, designed for use in agriculture or horticulture
8473
Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472:
8473.30.11.40
Memory modules suitable for use solely or principally with machines of heading 8471
8473.50
Parts and accessories equally suitable for use with machines of two or more of the headings 8470 to 8472:
8474.80.00.10
Designed for use with ceramic paste, unhardened cements and plastering materials
8477.10.40.00
For use in the manufacture of optical media
8477.10.90.15
Of a type used for processing rubber or other thermosetting materials
8479.71.00.00
Of a kind used in airports
8479.89.92.00
Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
8483.10.10
Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines
8483.40.30
Imported for use with machines for making cellulosic pulp, paper or paperboard
8486
Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in Note 9 (C) to this chapter; parts and accessories:
8501.32.45.00
Electric motors of a kind used as the primary source of mechanical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8501.32.55.20
For use in civil aircraft
8501.33.20.40
For use in civil aircraft
8501.52.80.20
For use in civil aircraft
8501.53.40.40
For use in civil aircraft
8503.00
Parts suitable for use solely or principally with the machines of heading 8501 or 8502:
8503.00.45.00
For generators suitable for use on aircraft
8503.00.90.00
For generators suitable for use on aircraft
8505.90.70.00
Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus, other than apparatus of heading 9018
8507.10.00
Lead-acid storage batteries, of a kind used for starting piston engines
8507.20.40.00
Of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8507.30.40.00
Of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8507.40.40.00
Of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8507.60.00.10
Of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8507.80.40.00
Of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80
8510.20.10.00
Hair clippers to be used for agricultural or horticultural purposes
8510.90.30.01
Parts of hair clippers to be used for agricultural or horticultural purposes
8511
Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, spark plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines; parts thereof:
8511.80.20.00
Designed for use on 6, 12 or 24 V systems
8511.90.20.00
Designed for use on 6, 12 or 24 V systems
8512
Electrical lighting or signaling equipment (excluding articles of heading 8539), windshield wipers, defrosters and demisters, of a kind used for cycles or motor vehicles; parts thereof:
8512.10
Lighting or visual signaling equipment of a kind used on bicycles:
8512.30.00.30
Radar detectors of a kind used in motor vehicles
8512.90.40.00
Of a kind used on bicycles
8514.30.10.00
Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
8516
Electric instantaneous or storage water heaters and immersion heaters; electric space heating apparatus and soil heating apparatus; electrothermic hairdressing apparatus (for example, hair dryers, hair curlers, curling tong heaters) and hand dryers; electric flatirons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545; parts thereof:
8516.80.40.00
Assembled only with simple insulated former and electrical connections, used for anti-icing or deicing
8517.62.00.10
Modems, of a kind used with data processing machines of heading 8471
8518.10.40.00
Microphones having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 10 mm and a height not exceeding 3 mm, for telecommunication use
8518.29.40.00
Without housing, having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 50 mm, for telecommunication use
8518.40.10.00
For use as repeaters in line telephony
8522
Parts and accessories suitable for use solely or principally with the apparatus of heading 8519 or 8521:
8523.49.40.00
For reproducing representations of instructions, data, sound, and image, recorded in a machine readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine; proprietary format recorded discs
8528.42.00.00
Capable of directly connecting to and designed for use with an automatic data processing machine of heading 8471
8528.52.00.00
Capable of directly connecting to and designed for use with an automatic data processing machine of heading 8471
8528.62.00.00
Capable of directly connecting to and designed for use with an automatic data processing machine of heading 8471
8528.71.30.00
Printed circuit assemblies incorporating a tuner, of a kind used with data processing machines of heading 8471
8529
Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528:
8529.10
Antennas and antenna reflectors of all kinds; parts suitable for use therewith:
8529.90.78.00
Mounted lenses suitable for use in, and entered separately from, closed-circuit television cameras, with or without attached electrical or non-electrical closed-circuit television camera connectors, and with or without attached motors
8532.10.00.00
Fixed capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0.5 kvar (power capacitors)
8536.90.60.00
Battery clamps of a kind used in motor vehicles of heading 8702, 8703, 8704 or 8711
8538
Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537:
8539.29.20.00
Lamps having glass envelopes not over 6.35 mm in maximum diameter and suitable for use in cystoscopes and other surgical instruments
8540.71.20.00
Modified for use as parts of microwave ovens
8543.30.20.00
Of a kind used solely or principally for the manufacture of printed circuits
8543.70.87.00
Electrical machines with translation or dictionary functions; flat panel displays other than for articles of heading 8528, except for subheadings 8528.52 or 8528.62; video game console controllers which use infrared transmissions to operate or access the various functions and capabilities of the console
8543.70.99.20
Special effects pedals for use with musical instruments
8544.30.00.00
Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships
8544.42.20.00
Of a kind used for telecommunications
8544.49.10.00
Of a kind used for telecommunications
8545
Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes:
8545.11.00
Of a kind used for furnaces
8545.19.20.00
Of a kind used for electrolytic purposes
8547.10.40.00
Ceramic insulators to be used in the production of spark plugs for natural gas-fueled, stationary, internal combustion engines
8548.10.05.40
Lead-acid storage batteries, of a kind used for starting engines
8701.30.10
Suitable for agricultural use
8701.91.10.00
For agricultural use
8701.92.10.00
Suitable for agricultural use
8701.93.10.00
Suitable for agricultural use
8701.94.10.00
Suitable for agricultural use
8701.95.10.00
Suitable for agricultural use
8704.10
Dumpers designed for off-highway use:
8706.00.30.00
For tractors suitable for agricultural use
8707.90.10.00
For tractors suitable for agricultural use
8708.29.21
For tractors suitable for agricultural use
8708.30.10
For tractors suitable for agricultural use
8708.40.30.00
For tractors suitable for agricultural use
8708.40.60.00
Of tractors suitable for agricultural use
8708.50.11
For tractors suitable for agricultural use
8708.50.70.00
For tractors suitable for agricultural use
8708.80.51.00
Of tractors suitable for agricultural use
8708.91.10.00
For tractors suitable for agricultural use
8708.91.60.00
For tractors suitable for agricultural use
8708.92.10.00
For tractors suitable for agricultural use
8708.92.60.00
For tractors suitable for agricultural use
8708.94.10.00
For tractors suitable for agricultural use
8708.94.60.00
For tractors suitable for agricultural use
8708.95.10.00
For tractors suitable for agricultural use
8709
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles:
8712.00.25.00
If weighing less than 16.3 kg complete without accessories and not designed for use with tires having a cross-sectional diameter exceeding 4.13 cm
8712.00.44.00
Bicycles having a front wheel exceeding 55 cm but not exceeding 63.5 cm in diameter and a rear wheel exceeding 63.5 cm in diameter, weighing less than 16.3 kg complete without accessories and not designed for use with tires having a cross-sectional diameter exceeding 4.13 cm, valued $200 or more each
8716.39.00.20
For use with the vehicles of heading 8709
8716.39.00.30
For use with the vehicles of heading 8703
8716.90.50.56
Wheels with tires for off-the-highway use
8803.10.00.15
For use by the Department of Defense or the United States Coast Guard
8803.20.00.15
For use by the Department of Defense or the United States Coast Guard
8803.30.00.15
For use by the Department of Defense or the United States Coast Guard
8803.90.90.15
For use by the Department of Defense or the United States Coast Guard
9001.90.80.00
Halftone screens designed for use in engraving or photographic processes
9002.11.60.00
Mounted lenses suitable for use in, and entered separately from, closed-circuit television cameras, with or without attached electrical or non-electrical closed-circuit television camera connectors, and with or without attached motors
9002.90.70.00
Halftone screens designed for use in engraving or photographic processes
9002.90.85.00
Mounted lenses suitable for use in, and entered separately from, closed-circuit television cameras, with or without attached electrical or non-electrical closed-circuit television camera connectors, and with or without attached motors
9005.10.00.20
Prism binoculars for use with infrared light
9005.80.40.20
For use with infrared light
9006.30.00.00
Cameras specially designed for underwater use, for aerial survey, or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes
9006.59.20.00
Cameras of a kind used for preparing printing plates or cylinders
9013.10.10.00
Not designed for use with infrared light
9014.20.80.40
For use in civil aircraft
9014.90.20.40
For use in civil aircraft
9017
Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, calipers), not specified or included elsewhere in this chapter; parts and accessories thereof:
9018
Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments; parts and accessories thereof:
9022
Apparatus based on the use of X-rays or of alpha, beta or gamma radiations, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus, X-ray tubes and other X-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like; parts and accessories thereof:
9022.13.00.00
Other, for dental uses
9022.14.00.00
Other, for medical, surgical or veterinary uses
9022.19.00.00
For other uses
9022.21.00.00
For medical, surgical, dental or veterinary uses
9022.29
For other uses:
9022.90.60.00
Of apparatus based on the use of X-rays
9023.00.00.00
Instruments, apparatus and models, designed for demonstrational purposes (for example, in education or exhibitions), unsuitable for other uses, and parts and accessories thereof
9029.20.40.40
For use in civil aircraft
9031.41.00
For inspecting semiconductor wafers or devices or for inspecting photomasks or reticles used in manufacturing semiconductor devices
9031.41.00.20
For inspecting photomasks or reticles used in manufacturing semiconductor devices
9031.49.70.00
For inspecting masks (other than photomasks) used in manufacturing semiconductor devices; for measuring surface particulate contamination on semiconductor devices
9032.89.20.00
Designed for use in a 6, 12 or 24 V system
9032.90.21.00
Designed for use in a 6, 12 or 24 V system
9033.00.20.00
Light-emitting diode (LED) backlights modules, the foregoing which are lighting sources that consist of one or more LEDs and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
9107.00.40.40
Time switches that operate on a fixed-time cycle, of a type used in household type refrigerators and combined refrigerator-freezers, to alternately control the operations of the compressor and the defrost unit (defrost timers)
9401.10
Seats of a kind used for aircraft:
9401.20.00.00
Seats of a kind used for motor vehicles
9401.90.10
Of seats of a kind used for motor vehicles
9403.10.00
Metal furniture of a kind used in offices
9403.30
Wooden furniture of a kind used in offices:
9403.40
Wooden furniture of a kind used in the kitchen:
9403.40.60.00
Designed for motor vehicle use
9403.50
Wooden furniture of a kind used in the bedroom:
9403.50.60.00
Designed for motor vehicle use
9403.90.10
Of furniture of a kind used for motor vehicles
9404.21.00.10
For use in a crib or toddler bed
9404.29.10.05
For use in a crib or toddler bed
9404.29.90.05
For use in a crib or toddler bed
9404.29.90.85
For use in a crib or toddler bed
9405.10
Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares:
9405.30.00
Lighting sets of a kind used for Christmas trees
9405.40.82.00
Light-emitting diode (LED) backlights modules, the foregoing which are lighting sources that consist of one or more LEDs and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
9405.91.60.40
Prisms and other glass articles of a kind used in chandeliers and wall brackets, and articles thereof
9504.90.60.00
Chess, checkers, parchisi, backgammon, darts and other games played on boards of a special design, all the foregoing games and parts there of (including their boards); mah-jong and dominoes; any of the foregoing games in combination with each other, or with other games, packaged together as a unit in immediate containers of a type used in retail sales; poker chips and dice
9506.99.40.00
Toboggans; bobsleds and luges of a kind used in international competition
9601.90.40.00
Coral, cut but not set, and cameos, suitable for use in jewelry
9612.10.10
Measuring less than 30 mm in width, permanently put up in plastic or metal cartridges (whether or not containing spools) of a kind used in typewriters, automatic data processing or other machines
9613.80.20.10
Multipurpose lighters, including those used to light charcoal and gas grills and fireplaces
9618.00.00.00
Tailors' dummies and other mannequins; automatons and other animated displays used for shopwindow dressing
9620.00.10.00
Accessories suitable for use solely or principally with the apparatus of heading 8519 or 8521
9704.00.00.00
Postage or revenue stamps, stamp-postmarks, first-day covers, postal stationery (stamped paper) and the like, used or unused, other than those of heading 4907
9801.00.10.10
Articles previously exported with intent to reimport after temporary use abroad
9801.00.20.00
Articles, previously imported, with respect to which the duty was paid upon such previous importation or which were previously free of duty pursuant to the Caribbean Basin Economic Recovery Act or Title V of the Trade Act of 1974, if (1) reimported, without having been advanced in value or improved in condition by any process of manufacture or other means while abroad, after having been exported under lease or similar use agreements, and (2) reimported by or for the account of the person who imported it into, and exported it from, the United States
9801.00.26.00
Articles, previously imported, with respect to which the duty was paid upon such previous importation, if: (1) exported within 3 years after the date of such previous importation; (2) sold for exportation and exported to individuals for personal use; (3) reimported without having been advanced in value or improved in condition by any process of manufacture or other means while abroad; (4) reimported as personal returns from those individuals, whether or not consolidated with other personal returns prior to reimportation; and (5) reimported by or for the account of the person who exported them from the United States within 1 year of such exportation
9801.00.60
Exhibition or use at any public exposition, fair or conference
9801.00.85.00
Professional books, implements, instruments, and tools of trade, occupation, or employment, when returned to the United States after having been exported for use temporarily abroad, if imported by or for the account of the person who exported such items
9802.00.20.00
Photographic films and dry plates manufactured in the United States (except motion-picture films to be used for commercial purposes) and exposed abroad, whether developed or not
9804.00.05
Books, libraries, usual and reasonable furniture and similar household effects, if actually used abroad by him or by him and his family not less than one year, and not intended for any other person, or for sale
9804.00.15
Professional books, implements, instruments and tools of trade, occupation or employment (not including theatrical scenery, properties or apparel, and not including articles for use in any manufacturing establishment, for any other person or for sale), owned and used by him abroad
9804.00.20
Wearing apparel, articles of personal adornment, toilet articles and similar personal effects; all the foregoing, if actually owned by and in the possession of such person abroad at the time of or prior to his departure for the United States, and if appropriate for his own personal use and intended only for such use and not for any other person nor for sale
9804.00.35
Automobiles, trailers, aircraft, motorcycles, bicycles, baby carriages, boats, horse-drawn conveyances, horses and similar means of transportation, and the usual equipment accompanying the foregoing; any of the foregoing imported in connection with the arrival of such person and to be used in the United States only for the transportation of such person, his family and guests, and such incidental carriage of articles as may be appropriate to his personal use of the conveyance
9804.00.60
Automobiles rented by any resident of the United States while abroad and imported for the transportation of such resident, his family and guests, and such incidental carriage of articles as may be appropriate to his personal use of the automobile
9804.00.80
Articles (including not over 50 cigars, or 300 cigarettes, or 2 kilograms of smoking tobacco or a proportionate amount of each, and not over 1 liter of alcoholic beverages), reasonable and appropriate, and intended exclusively, for the bona fide personal use of, and (except for articles consumed in use) to be taken out of the United States by, any person arriving in the United States who is leaving a vessel, vehicle or aircraft, engaged in international traffic, on which he is employed, with the intention of resuming such employment
9808.00.20.00
Sound recordings and recorded video tapes for use by it in the program authorized by the United States Information and Educational Exchange Act of 1948 (22 U.S.C. 1431-1479)
9808.00.80.00
Goods certified by it to the Commissioner of Customs to be imported for the use of the National Aeronautics and Space Administration or for the implementation of an international program of the National Aeronautics and Space Administration, including articles to be launched into space and parts thereof, ground support equipment and uniquely associated equipment for use in connection with an international program of the National Aeronautics and Space Administration, including launch services agreements
9809.00.20
Upon the request of the Department of State, office supplies and equipment and other articles for the official use of representatives of foreign governments or of personnel of public international organizations, on duty in the United States
9809.00.30
Articles for the official use of members of the armed forces of any foreign country on duty in the United States
9809.00.40
Articles which, while in the United States, will remain the property of such government or of such organization and will be used only in connection with noncommercial functions of such government or of such organization, including exhibitions which are sponsored by or participated in by such government or such organization and which are not commercial in character or connected with commercial undertakings
9810.00.20.00
Hand-woven fabrics, to be used by the institution in making religious vestments for its own use or for sale
9810.00.35.00
Letters, numbers, and other symbols; number cards and other arithmetical materials; printed matter; blocks and other dimensional shapes; geometrical figures, plane or solid; geographical globes; tuned bells and basic materials for understanding music; model articles and figures of animate objects; puzzles and games; flags; dressing frames; dummy clocks; bottles, boxes, and other containers or holders; all the foregoing, whether or not in sets, fabricated to specification and designed for the classroom instruction of children; and containers or holders fabricated to specification and designed for the storage of such instructional articles when not in use
9810.00.55.00
Patterns and models exclusively for exhibition or educational use at any such institution
9810.00.60.00
Instruments and apparatus, if no instrument or apparatus of equivalent scientific value for the purposes for which the instrument or apparatus is intended to be used is being manufactured in the United States (see U.S. note 6 to this subchapter)
9810.00.67.00
Tools specially designed to be used for the maintenance, checking, gauging or repair of instruments or apparatus admitted under subheading 9810.00.60
9810.00.70.00
Wild animals (including birds and fish) imported for use, or for sale for use, in any scientific public collection for exhibition for scientific or educational purposes
9810.00.85.00
Cellulosic plastics materials imported for use in artificial kidney machines or apparatus by a hospital or by a patient pursuant to prescription of a physician
9810.00.90.00
Prayer shawls, bags for the keeping of prayer shawls and headwear of a kind used for public or private religious observances, whether or not any of the foregoing is imported for the use of a religious institution
9810.00.95.00
Scrolls or tablets of wood or paper, commonly known as Gohonzon, imported for use in public or private religious observances, whether or not any of the foregoing is imported for the use of a religious institution
9811.00.20
Alcoholic beverage samples (each sample containing not more than 300 milliliters if a malt beverage, not more than 150 milliliters if a wine and not more than 100 milliliters if any other alcoholic beverage) to be used in the United States only for soliciting orders by persons importing alcoholic beverages in commercial quantities
9811.00.40
Samples of tobacco products, and cigarette papers and tubes (each sample consisting of not more than (a) 3 cigars, (b) 3 cigarettes, (c) 3.5 grams of tobacco, (d) 3.5 grams of snuff, (e) 3 cigarette tubes or (f) 25 cigarette papers) to be used in the United States only for soliciting orders by persons importing tobacco products, cigarette papers or cigarette tubes in commercial quantities
9811.00.60
Any sample (except samples covered by heading 9811.00.20 or 9811.00.40), valued not over $1 each, or marked, torn, perforated or otherwise treated so that it is unsuitable for sale or for use otherwise than as a sample, to be used in the United States only for soliciting orders for products of foreign countries
9813.00.10
Models of women's wearing apparel imported by manufacturers for use solely as models in their own establishments
9813.00.15
Articles imported by illustrators and photographers for use solely as models in their own establishments, in the illustrating of catalogues, pamphlets or advertising matters
9813.00.20
Samples solely for use in taking orders for merchandise
9813.00.30
Articles intended solely for testing, experimental or review purposes, including specifications, photographs and similar articles for use in connection with experiments or for study
9813.00.40
Locomotives and other railroad equipment brought temporarily into the United States for use in clearing obstructions, fighting fires or making emergency repairs on railroads within the United States, or for use in transportation otherwise than in international traffic when the Secretary of the Treasury finds that the temporary use of foreign railroad equipment is necessary to meet an emergency
9813.00.45
Containers for compressed gases, filled or empty, and containers or other articles in use for covering or holding merchandise (including personal or household effects) during transportation and suitable for reuse for that purpose
9813.00.50
Professional equipment, tools of trade, repair components for equipment or tools admitted under this heading and camping equipment; all the foregoing imported by or for nonresidents sojourning temporarily in the United Statesand for the use of such nonresidents
9813.00.55
Articles of special design for temporary use exclusively in connection with the manufacture or production of articles for export
9813.00.70
Works of the free fine arts, engravings, photographic pictures and philosophical and scientific apparatus brought into the United States by professional artists, lecturers or scientists arriving from abroad for use by them for exhibition and in illustration, promotion and encouragement of art, science or industry in the United States
9814.00.50.00
Tea, tea waste and tea siftings and sweepings, all the foregoing to be used solely for manufacturing theine, caffeine or other chemical products whereby the identity and character of the original material is entirely destroyed or changed
9817.00.20.00
Monofilament gill nets to be used for fish sampling
9817.00.30.00
To be used in taking wild birds under license issued by an appropriate Federal or State governmental authority
9817.00.50.00
Machinery, equipment and implements to be used for agricultural or horticultural purposes
9817.00.60.00
Parts to be used in articles provided for in headings 8432, 8433, 8434 and 8436, whether or not such parts are principally used as parts of such articles and whether or not covered by a specific provision within the meaning of additional U.S. rule of interpretation 1(c)
9817.00.92
Books, music and pamphlets, in raised print, used exclusively by or for them
9817.00.94
Braille tablets, cubarithms, and special apparatus, machines, presses, and types for their use or benefit exclusively
9817.00.98.00
Theatrical scenery, properties and apparel brought into the United States by proprietors or managers of theatrical, ballet, opera or similar productions arriving from abroad for temporary use by them in such productions
9817.29.01
Cyclic organic chemical products in any physical form having an aromatic or modified aromatic structure, however provided for in chapter 29 (but excluding 2,3-dihydroxynaphthalene-6-sulfonic acid, sodium salt), to be used in the manufacture of photographic color couplers; photographic color couplers (but excluding 2,3-dihydroxynaphthalene-6-sulfonic acid, sodium salt) (all the foregoing goods however provided for in chapter 29 or in subheading 3707.90.31, 3707.90.32 or 3707.90.60)
9817.60.00.00
Any of the following articles not intended for sale or distribution to the public: personal effects of aliens who are participants in, officials of, or accredited members of delegations to, an international athletic event held in the United States, such as the Olympics and Paralympics, the Goodwill Games, the Special Olympics World Games, the World Cup Soccer Games, or any similar international athletic event as the Secretary of the Treasury may determine, and of persons who are immediate family members of or servants to any of the foregoing persons; equipment and materials imported in connection with any such foregoing event by or on behalf of the foregoing persons or the organizing committee of such an event, articles to be used in exhibitions depicting the culture of a country participating in such an event; and, if consistent with the foregoing, such other articles as the Secretary of the Treasury may allow
9817.84.01
Wheelbuilding, wheel-trueing, rimpunching, tire fitting and similar machines (provided for in subheading 8462.21, 8462.29, 8462.41, 8462.49, 8479.89.94 or 9031.80), all the foregoing suitable for use in the manufacture of wheels for bicycles
9817.85.01
Prototypes to be used exclusively for development, testing, product evaluation, or quality control purposes
9817.95.01
Utilitarian articles of a kind used in the home in the performance of specific religious or cultural ritual celebrations for religious or cultural holidays, or religious festive occasions, such as Seder plates, blessing cups, menorahs or kinaras
9818.00.03.00
Spare repair parts or materials (other than nets or nettings) which the owner or master of a vessel certifies are intended for use aboard a cargo vessel, for installation or use on such vessel, as needed, in the United States, at sea, or in a foreign country, but only if duty is or has been paid under this schedule upon first entry into the United States of each such spare part or material purchased in, or imported from, a foreign country
9819.11.12
Apparel articles wholly assembled, or knit-to-shape and wholly assembled, or both, in one or more such lesser developed countries (except the Republic of Rwanda) enumerated in U.S. note 2(d) to this subchapter, subject to the provisions of U.S. note 2 to this subchapter, regardless of the country of origin of the fabric or the yarn used to make such articles, if entered during the period beginning on the date announced in a Federal Register notice issued by the United States Trade Representative and continuing through September 30, 2025, inclusive
9820.85.44
Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships, the foregoing the product of Haiti and entered under the terms of U.S. note 6 to this subchapter
9822.09.22
Undenatured ethyl alcohol and other spirits of an alcoholic strength by volume of 80 percent vol. or higher, if such ethyl alcohol is to be used as a fuel or is suitable for use in producing a mixture of gasoline and alcohol, a mixture of a special fuel and alcohol or any other mixture to be used as a fuel
9822.09.24
Ethyl alcohol and other spirits, denatured of any strength if such ethyl alcohol is to be used as a fuel or is suitable for use in producing a mixture of gasoline and alcohol, a mixture of a special fuel and alcohol or any other mixture to be used as a fuel
9901.00.50
Ethyl alcohol (provided for in subheadings 2207.10.60 and 2207.20) or any mixture containing such ethyl alcohol (provided for in heading 2710 or 3824) if such ethyl alcohol or mixture is to be used as a fuel or in producing a mixture of gasoline and alcohol, a mixture of a special fuel and alcohol, or any other mixture to be used as fuel (including motor fuel provided for in subheading 2710.12.15, 2710.19.16, 2710.19.24 or 2710.20.15), or is suitable for any such uses
9902.01.78
Mixtures containing titanium dihydride pastes of a kind used for coating the interior of low-pressure mercury lamps (CAS No. 7704-98-5) (provided for in subheading 2850.00.07)
9902.08.59
Copper phthalocyanine ((Phthalocyanato(2-))-copper), not ready for use as pigment (PCN Blue Crude) (CAS No 147-14-8) (provided for in subheading 3204.17.20)
9902.08.60
Copper phthalocyanine monosulfonate (hydrogen [29H,31H-phthalocyaninesulphonato (3-)-N29, N30, N31, N32]cuprate(1-)), not ready for use as pigment (CAS No. 28901-96-4) (provided for in subheading 3204.17.60)
9902.08.61
Copper chlorophthalocyanine (30 to 35 percent pure) not ready for use as pigment (CAS Nos. 16040-69-0 (65-70 percent by weight) and 12239-87-1 (30-35 percent by weight)) (provided for in subheading 3204.17.60)
9902.08.62
Mixture of nonchlorinated copper phthalocyanine blue crude not ready for use as pigment (CAS No. 147-14-8) (30–40 percent by weight) and chlorinated copper phthalocyanine blue crude not ready for use as pigment (CAS No. 68987-63-3) (60–70 percent by weight) (provided for in subheading 3204.17.60)
9902.08.64
Copper chlorophthalocyanine, crude not ready for use as pigment (CAS No. 12239-87-1) (provided for in subheading 3204.17.90)
9902.08.90
Yttrium oxide phosphor doped by europium, of a kind used as a luminophore. (CAS No. 68585-82-0) (provided for in subheading 3206.50.00)
9902.08.91
Lanthanum phosphate phosphor doped by cerium and terbium, of a kind used as a luminophore (CAS No. 95823-34-0) (provided for in subheading 3206.50.00).
9902.08.92
Barium magnesium aluminate phosphor doped by europium, of a kind used as a luminophore (CAS Nos. 102110-17-8,1304-28-5,1309-48-4, 1344-28-1,1308-96-9, and 63774-55-0) (provided for in subheading 3206.50.00)
9902.08.94
Calcium chloride fluoride phosphate, antimony- and manganese-doped, of a kind used as a luminophore (Calcium halo phosphate phosphor) (CAS No. 545386-98-9) (provided for in subheading 3206.50.00)
9902.08.95
Barium magnesium aluminate phosphor doped by europium and manganese, of a kind used as a luminophore (CAS Nos. 102110-17-8 ,1344-43-0, 1304-28-5, 1309-48-4, 1344-28-1, 1308-96-9, and 63774-55-0) (provided for in subheading 3206.50.00)
9902.09.81
Mixtures containing β-conglutin and application adjuvants used as a fungicide (provided for in subheading 3808.92.50)
9902.10.21
Preparations containing 12-hydroxy-9-octadecenoic acid (Ricinoleic acid) of a kind used as a diluent in lubricants (CAS No. 141-22-0) (provided for in subheading 3811.21.00)
9902.10.22
Mixtures of hydrotreated neutral petroleum oils C20 - C50, of a kind used as viscosity improvers (CAS No. 72623-87-1) (provided for in subheading 3811.21.00).
9902.10.24
Mixtures containing poly(ethylene-co-ethenyl acetate) of a kind used as fuel additives (CAS No. 24937-78-8) (provided for in subheading 3811.90.00)
9902.10.25
Mixtures of tall oil mono-, di-, and triglycerides of a kind used as lubricity improvers (CAS No. 97722-02-6) (provided for in subheading 3811.90.00)
9902.10.40
Mixture of precipitated silica gel (CAS No. 112926-00-8) and (4-hydroxy-2,2,6,6-tetramethyl-1-piperidinyl)oxidanyl (CAS No. 2226-96-2) of a kind used as polymerization inhibitors (provided for in subheading 3815.90.50)
9902.10.47
Mixtures of barium carbonate (CAS No. 513-77-9), strontium carbonate (CAS No. 1633-05-2), calcium carbonate (CAS No. 471-34-1), and 1-methoxy-2-propanyl acetate (CAS No. 108-65-6), of a kind for use as emitter suspension cathode coating (provided for in subheading 3824.90.92)
9902.10.53
Mixtures of methyl esters of C16-C18 and C18 unsaturated fatty acids (CAS No. 67762-38-3) and methyl hexadecanoate (Methyl Palmitate) (CAS No. 112-39-0) (provided for in subheading 3824.99.41) derived from coconut, palm-kernel or palm oil, used other than as a fuel
9902.10.98
Poly(vinyl acetate), of a kind used in food preparations (CAS No. 9003-20-7) (provided for in subheading 3905.19.00)
9902.11.45
Polyethylenimine (CAS No. 9002-98-6), of a kind used as a component for further manufacturing into a finished medical device (provided for in subheading 3911.90.25)
9902.11.80
Insulated tubes of plastics, not reinforced, without fittings, presented in the form of hose, the foregoing tubes having polyethylene pipes inserted therein and suitable for use in hot water supply or heating systems (provided for in subheading 3917.32.00)
9902.11.82
Plastic elbows, holding pins, bend supports, anchor clips, staples of a kind used in construction applications (provided for in subheading 3917.40.00)
9902.11.84
Sheets of plastics of poly(methyl methacrylate), noncellular and not reinforced, laminated, supported or similarly combined with other materials, not flexible, the foregoing of a kind used to produce counter tops or edging, cabinet tops, faces or edges for home or office furnishings (provided for in subheading 3920.51.50)
9902.11.86
Poly(vinyl butyral) film (CAS No. 27360-07-2), certified by the importer to be used in aircraft (provided for in subheading 3920.91.00)
9902.11.90
Injection molded thermoplastic dental restorative product containers, designed for use in a dispensing system, each container with capacity not over 50 ml (provided for in subheading 3923.30.00)
9902.11.91
Plug-type closures of polyethylene, suitable for use in capping specimen tubes and measuring 15 mm in length; each closure having an upper portion designed to extend beyond the specimen tube to permit holding of the closure, such upper portion having a diameter of 15.5 mm and thickness of 3.3 mm and having a notched groove; with the bottom portion of such closure designed for insertion into a specimen tube having a diameter measuring approximately 11.7 mm; the foregoing closures certified by the importer as for use in an automated insertion system (provided for in subheading 3923.50.00)
9902.11.93
Plastic lids certified by the importer for use on food storage containers (provided for in 3923.50.00)
9902.12.04
Fasteners of nylon or of polypropylene, with a filament length of 6 mm or more but not over 127 mm, presented on clips each holding the quantity of 25, 50 or 100 pieces, suitable for use in a mechanical attaching device (provided for in subheading 3926.90.85)
9902.12.05
Plastic components of a kind used as one-piece internal top and bottom dividers for golf bags (provided for in subheading 3926.90.99)
9902.12.12
Mounts of plastics, designed to secure cameras of subheading 8525.80.40 to a person's head; each mount incorporating an adjustable head-strap designed to encircle the forehead, a strap designed to cross the top of the user's head, a plastic mount designed to clip the camera to the head strap, a thumbscrew to allow the mounting of the camera and the adjustment of the viewing direction of the camera on a pivot (provided for in subheading 3926.90.99)
9902.12.13
Accessories of plastics, designed for use with cameras of subheading 8525.80.40; such goods measuring between 14 cm and 17 cm in length, buoyant in water, each incorporating a handle designed to allow a user to grip with the hand, an adjustable hand-strap and an adjustable thumb screw designed to permit mounting of the camera and adjusting the viewing angle of the camera on a pivot (provided for in subheading 3926.90.99).
9902.12.15
Camera mounts of plastics, designed to clamp to tubes measuring 10 to 23 mm, each mount designed to hold two cameras in such positions as to permit the user to take photos with immersive front-facing and rear-facing perspectives (provided for in subheading 3926.90.99)
9902.12.20
Replacement doors of plastics, designed for use on waterproof camera housings (provided for in subheading 3926.90.99)
9902.12.25
Anchors suitable for use with cameras of subheading 8525.80.40, designed to be affixed to cameras by means of an adhesive, incorporating tethers that may be tied to the anchors (provided for in subheading 3926.90.99)
9902.12.33
Flotation devices of vulcanized rubber other than of hard rubber, designed for use with cameras of subheading 8525.80.40, such devices with length, width and height dimensions all smaller than 50 mm and either designed to encase the camera or to attach to the camera by an adhesive pad (provided for in 4016.99.60)
9902.12.34
Whole, tanned bovine hides, full grain unsplit or grain splits, in the dry state, not further prepared after tanning or crusting, having a unit surface area of 5.11 m2 or more but not over 6.04 m2, certified by the importer for use in the production of upholstery (provided for in subheading 4104.41.50)
9902.12.47
Bags of man-made fibers, with outer surface of textile materials, the foregoing designed for use on janitorial, cleaning and housekeeping carts (provided for in subheading 4202.92.91)
9902.12.49
Cases or containers with outer surface of sheeting of plastics or of man-made fibers, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container or retail packaging indicating its intention to be used for, electronic games of heading 9504 or accessories thereof (provided for in subheadings 4202.92.91 and 4202.92.97)
9902.12.50
Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.53
Cases or containers of injection-molded acrylonitrile-butadiene-styrene (ABS), polypropylene (PP) or polycarbonate (PC) plastics, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container, its zipper pull or its retail packaging indicating such cases are designed for use as holders for electronic games of subheading 9504 or accessories thereof (provided for in subheading 4202.99.90)
9902.12.59
Full-fingered gloves, each with a palm side of leather and a back side comprising a camouflage-printed knitted fabric wholly of polyester and coated with expanded polytetrafluoroethylene (EPTFE), such gloves with insulation comprising 40 percent by weight of synthetic microfiber and 60 percent by weight of duck down; each having a mitt sewn to the back of the glove as a flap, with leather tips for each finger and thumb designed to improve grip, such mitt designed to cover the fingers for additional warmth; the foregoing gloves designed for use in the sport of hunting (provided for in subheading 4203.21.80)
9902.12.61
Gloves of horsehide or cowhide (except calfskin) leather, not specially designed for use in sports, not wholly of leather, the foregoing with fourchettes or sidewalls which, at a minimum, extend from fingertip to fingertip between each of the four fingers (provided for in subheading 4203.29.15)
9902.12.62
Gloves of horsehide or cowhide (except calfskin) leather, not specially designed for use in sports, not wholly of leather, such gloves without fourchettes or sidewalls (provided for in subheading 4203.29.18)
9902.12.63
Men's full-fingered gloves with a palm side of leather and a backside of woven fabric comprising 89 percent or more but not over 95 percent by weight of man-made fibers and 5 percent or more but not over 11 percent by weight of elastomeric fibers, such fabric coated with plastics; such gloves stuffed with synthetic microfiber for thermal insulation, with elasticized wrist and valued at $18 or more per pair; the foregoing other than gloves specially designed for use in sports (provided for in subheading 4203.29.30)
9902.12.66
Plaiting materials and products of plaiting materials, suitable for use in window shades, presented in rolls each having an area measuring 27.85 m2 or more but not over 46.46 m2, of bamboo reeds and/or bamboo slats each measuring 1 mm or more but not over 13 mm in width and/or bamboo cane measuring over 2 mm but not over 5 mm in cross section, the foregoing woven with yarn of polyester into a repeating pattern, such pattern whether or not including grass, paper strips or jute (provided for in subheading 4601.92.20)
9902.12.67
Plaiting materials and products of plaiting materials, of wood, suitable for use in window shades, presented in rolls each having an area measuring over 27.85 m2 but less than 46.46 m2, containing any combination of wood slats each measuring 6 mm or more but not over 8 mm in width or 22 mm or more but not over 25 mm in width and measuring 1 mm or more but not over 2 mm in thickness, bamboo reeds measuring 1 mm or more but not over 2.5 mm in width, marupa wood rods measuring 1.5 mm or more but not over 3 mm in diameter and/or paper rope, the foregoing woven with yarns of polyester into a repeating pattern, whether or not such pattern also contains jute or paper (provided for in subheading 4601.94.20)
9902.13.28
Viscose rayon staple fibers having a decitex of less than 5.0 and a trilobal multi-limbed cross-section, the limbs having a length-to-width aspect ratio of at least 2:1, suitable for use in producing goods of heading 9619 (provided for in subheading 5504.10.00)
9902.13.70
Batting gloves of man-made fibers, specially designed for use in the sport of baseball, with a strap that wraps around the wrist and the back of the hand to secure the glove to the wrist (provided for in subheading 6216.00.46)
9902.13.73
Sacks and bags, of undyed woven fabric of nylon multifilament yarns, such yarns not exceeding 10 decitex, the foregoing bags designed for use for packing wool for transport, storage or sale (provided for in subheading 6305.39.00)
9902.13.82
Nonwoven radial segment and chordal orientation brake segments of oxidized polyacrylonitrile fibers, made up and presented as cut otherwise than into squares or rectangles, such segments formed by needling web and unidirectional tow fabrics together, the foregoing designed for use in aircraft braking systems (provided for in subheading 6307.90.98)
9902.13.85
Portable and foldable water or food bowls of textile materials, designed for use by pets (provided for in subheading 6307.90.98)
9902.13.87
Chest harnesses of textile materials, each designed for attaching cameras of subheading 8525.80.40 to a user's chest; incorporating a waist belt and shoulder straps, each with a plastic connector and thumb screw designed for camera mounting or adjustment (provided for in subheading 6307.90.98)
9902.13.90
Mounts of textile materials, designed to attach cameras of subheading 8525.80.40 to a user's wrist, arm or leg; such mounts incorporating hook-and-loop adjustable straps and designed to permit adjustment of the camera viewing angle 360 degrees on the mounted plane and of the camera tilt against that plane (provided for in subheading 6307.90.98)
9902.13.97
Protective active footwear for women, with outer soles and uppers of rubber or plastics (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper ,and except footwear with insulation that provides protection against cold weather), whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm, covering the ankle, valued over $26/pr; where such protection is imparted by the use of a laminated textile fabric, such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6402.91.42)
9902.13.98
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated, but not coated, textile fabric; such footwear, if valued over $27, without openings in the bottom and/or side of the sole or covered opening in the upper designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)
9902.13.99
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper; and except footwear designed to be protective that is incomplete in its condition as imported), valued over $27/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated, but not coated, textile fabric; such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)
9902.14.02
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated, but not laminated, textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.91.50)
9902.14.10
Women’s footwear with outer soles of rubber or plastics measuring not over 14 mm in thickness and with uppers of plastics, such footwear designed for use in cheerleading activities, valued over $15/pair and weighing no more than 0.5 kg/pair (provided for in subheading 6402.99.31)
9902.14.12
Protective active footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle, valued over $24/pair (provided for in subheading 6402.99.32); the foregoing footwear, if valued over $26/pair, other than footwear which provides protection against water that is imparted by the use of a laminated textile fabric and with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture
9902.14.13
Protective active footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle, which provides protection against water that is imparted by the use of a laminated textile fabric and with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture; the forgoing footwear valued over $26/pair (provided for in subheading 6402.99.32)
9902.14.14
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6402.99.33)
9902.14.15
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $27/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)
9902.14.16
Footwear for other persons, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $18/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)
9902.14.17
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported); the foregoing not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.99.33)
9902.14.18
Women’s footwear with outer soles and uppers of rubber or plastics, each sole measuring not over 12 mm in thickness, the foregoing footwear designed for use in cheerleading activities, valued over $19/pair and weighing not over 0.5 kg/pair (provided for in subheading 6402.99.90)
9902.14.19
Golf shoes for men, youths and boys, with outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers), not welt, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather, where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading 6403.19.30)
9902.14.23
Footwear for men, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (the foregoing other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than slip-on footwear); such footwear not covering the ankle, valued $29/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.60)
9902.14.24
Footwear for men, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics; the foregoing other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than slip-on footwear; such footwear not covering the ankle, valued $27/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6403.99.60)
9902.14.26
Footwear for other persons, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear), not covering the ankle, valued $20/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit or a combination thereof, designed to vent moisture; the foregoing, if for women, other than such footwear valued over $29/pair (provided for in subheading 6403.99.90)
9902.14.27
Footwear for women, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear); such footwear not covering the ankle, valued $29/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.29
Footwear for women, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear); such footwear not covering the ankle, valued $27/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric); the foregoing, if valued $29/pair or higher, other than footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.30
Footwear for other persons, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear), not covering the ankle, valued $18/pair or higher; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric; the foregoing other than footwear for women either (i) valued over $27 per pair, or (ii) if valued over $20/pair, having openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.31
Women’s footwear with uppers of leather and outer soles of rubber or plastics, such soles measuring not over 9 mm in thickness, the foregoing designed for use in cheerleading activities, valued over $19/pair and weighing no more than 0.5 kg/pair (provided for in subheading 6403.99.90)
9902.14.35
Sports footwear for women, with outer soles of rubber or plastics and uppers of textile materials, valued over $20/pair, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.11.90)
9902.14.36
Sports footwear for men, with outer soles of rubber or plastics and uppers of textile materials, valued over $20/pair, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.11.90)
9902.14.38
Footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, work footwear and footwear designed to be protective that is incomplete in its condition as imported); such footwear valued over $25/pair, not covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6404.19.20)
9902.14.39
Footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, work footwear, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $27/pair, not covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.19.20)
9902.14.55
Footwear for men, with uppers of which over 50 percent of the external surface is polyurethane measuring 1.4 mm in thickness and with cemented outer soles of which over 50 percent of the external surface is felt, having the characteristics required for normal use, including durability and strength; the foregoing not covering the ankle and valued $20 per pair or higher (provided for in subheading 6405.90.90)
9902.14.70
Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and not over 3 percent of acrylic latex organic binder, of a basis weight greater than or equal to 1745 g/m2, measuring 10.0 mm or more in thickness; the foregoing presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).
9902.14.71
Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and not over 3 percent by weight of acrylic latex organic binder, of a basis weight less than 1745 g/m2, measuring 5.0 mm or more but not over 9.9 mm in thickness; presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).
9902.14.73
Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and 3 percent or more but less than 7 percent by weight of acrylic latex organic binder, measuring 10.0 mm or more in thickness, of a basis weight greater than or equal to 1745 g/m2; presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).
9902.14.87
Liquid-filled glass bulbs designed for use in sprinkler systems and other release devices (provided for in subheading 7020.00.60)
9902.14.89
Silver in semimanufactured form, containing by weight 87 to 89 percent of silver, 11 to 13 percent of tin and 0.1 to 0.7 percent of copper oxide, presented in the form of strip and certified by the importer as suitable for use in electrical contact systems intended for the manufacture of switches and relays (provided for in subheading 7106.92.50)
9902.14.93
Ferroboron to be used for manufacturing amorphous metal strip (provided for in subheading 7202.99.80)
9902.15.01
Wire cages of iron or steel, each with attached tray of plastics or of steel, such cages with one or two hinged doors for access to inside of cage, the foregoing designed for small pets other than dogs and for use in the home (provided for in subheading 7323.99.90)
9902.15.02
Fire escape ladders no taller than 4.3 m when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $19 each (provided for in subheading 7326.90.86)
9902.15.03
Fire escape ladders measuring 4.4 m or more but not more than 7.4 m tall when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $34.50 each (provided for in subheading 7326.90.86)
9902.15.24
Rotary rock drill bits, each with cutting part containing by weight over 0.2 percent of chromium, molybdenum or tungsten or over 0.1 percent of vanadium (provided for in subheading 8207.19.30), designed for use with rock drilling and earth boring tools of heading 8430
9902.15.25
Rotary or fixed cutter drill bits, each with cutting part of precious or semiprecious stones (natural, synthetic or reconstructed) on a substrate of base metal or metal carbide mounted to a base metal body, the foregoing designed for use with rock drilling and earth boring tools of heading 8430 (provided for in subheading 8207.19.60)
9902.15.30
Scissors, valued over $1.75/dozen, designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)
9902.15.31
Scissors, valued over $1.75/dozen, each with stainless steel blades, one small loop handle and one larger loop handle and with an overall length of less than 17 cm, the foregoing other than those scissors designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)
9902.15.32
Nail clippers with stainless steel blades,each having one or both blades with rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30).
9902.15.33
Nail nippers and clippers and nail files, the foregoing other than nail nippers and clippers with one or both blades having rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30)
9902.15.36
Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30)
9902.15.38
Economizers comprising auxiliary plant for use with boilers of heading 8402, with a pressure capacity of 10686.87 kPa, certified by the importer as for use in the pulp and paper industry (provided for in subheading 8404.10.00)
9902.15.39
Stationary steam turbines, condensing type, direct drive, suited for use with a generator, having an output of 60 MW or more but not over 120 MW, with a rotational speed more than 3500 RPM (provided for in subheading 8406.81.10)
9902.15.40
Steam turbines, multi-stage, condensing type, direct drive, suitable for use with a generator, having an output of 27 MW or more but not over 40 MW, with an operating rotational speed more than 3500 RPM (provided for in subheading 8406.82.10)
9902.15.43
High silicon molybdenum exhaust manifolds for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines) with cylinder capacity of 2,300 cc or more but not exceeding 20,000 cc, each manifold measuring at least 80 cm but not exceeding 200 cm in length, at least 10 cm but not over 200 cm in width, and at least 10 cm but not exceeding 200 cm in height (provided for in subheading 8409.99.91)
9902.15.44
Connecting rods designed for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines) for vehicles of subheading 8701.20 or heading 8702, 8703, or 8704, each rod measuring at least 20 cm but not exceeding 120 cm in length, at least 10 cm but not exceeding 60 cm in width, and at least 5 cm but not exceeding 90 cm in height (provided for in subheading 8409.99.91)
9902.15.45
Cast iron crankcases, suitable for use solely or principally with marine propulsion engines, each crankcase measuring more than 1.1 m in length (provided for in subheading 8409.99.92)
9902.15.46
Cast-iron cylinder heads suitable for use solely or principally with marine compression-ignition engines, such parts with cylinder bore over 125 mm and weighing over 32 kg each (provided for in subheading 8409.99.92)
9902.15.47
Pistons suitable for use solely or principally with marine propulsion engines, such pistons each having a cast steel crown and aluminum body, weighing 12 kg or more (provided for in subheading 8409.99.92)
9902.15.48
Fuel-injection pump assemblies, designed for compression-ignition internal combustion engines with a capacity of 6.4 liters and with output of less than 1000 kW of power (provided for in subheading 8413.30.10), the foregoing other than used goods
9902.15.49
Fuel-injection pumps, designed for compression-ignition engines having an output of 1000 kW or greater, each pump weighing 60 kg or more and capable of generating a pressure greater than 1200 bar, such pumps designed for use in a common rail fuel system (provided for in subheading 8413.30.10), the foregoing other than used goods
9902.15.52
High pressure fuel pumps, each incorporating a default open or closed solenoid valve, certified by the importer to be used in regulating the fuel supply into the fuel rail, designed for use in gasoline direct injection (GDI) spark-ignition internal combustion piston engines (provided for in subheading 8413.30.90); the foregoing other than used goods
9902.15.54
Exhaust fans for permanent ceiling installation designed to be used in the bathroom, each containing an electric motor with an output wattage not exceeding 125 W, with or without a light, with volume flow between 1.35 m3 and 2.04 m3 per minute and having a sound level greater than 2.2 sones but not exceeding 6.8 sones (provided for in subheading 8414.51.30)
9902.15.57
Chimney range hoods, island range hoods or under-the-cabinet range hoods, of a kind normally used in the household, designed for permanent installation to a wall or ceiling, each such hood measuring over 121 cm on its maximum horizontal side, presented with or without a blower; the foregoing, if presented without blower, incorporating other ventilating equipment (provided in subheading 8414.80.90)
9902.15.59
Plastic grilles (provided for in subheading 8414.90.10), each incorporating a light-emitting diode (LED) light on the exterior perimeter capable of providing continuous light, certified by the importer as designed to be used with exhaust fans for permanent installation and generating 2.83 m3 per minute, such fans of a kind for residential use and described in subheading 8414.51.30
9902.15.82
Machinery for molding, assembling or otherwise forming uncured, unvulcanized rubber (green) tires (provided for in subheading 8477.59.01), the foregoing to be used in production of new pneumatic tires designed in all sizes for motor cars (such tires in subheadings 4011.10.10 and 4011.10.50), buses and trucks (such tires in subheadings 4011.20.10 and 4011.20.50), motorcycles (such tires in subheading 4011.40.00) and agricultural, forestry, construction or industrial vehicles (such tires of subheadings 4011.70.00, 4011.80.10, 4011.80.20, 4011.80.80, 4011.90.10, 4011.90.20, and 4011.90.80)
9902.15.83
Electromechanical "hide and seek" toys, designed for use by cats or dogs, each with an electrically powered fast-moving feather wand that changes direction randomly; such wand mechanism positioned in a round enclosure of plastics, designed to allow the wand to shoot out; such toys each containing a carpeted scratching area on top (provided for in subheading 8479.89.94)
9902.15.84
Electromechanical pet toys, each with a plastic butterfly attached to a wire cable that revolves around a plastic base when in use, such toy designed to simulate the flying motion of a butterfly (provided for in subheading 8479.89.94)
9902.15.90
Segmented compression-type molds designed to be used for molding / forming and curing "green tires" with a rim diameter measuring over 63.5 cm (provided for in subheading 8480.79.90), such tires for off-the-road use
9902.15.91
Valve-type fuel injectors, each functional in a common rail fuel system with a pressure greater than 120 Mpa (1200 bar) (provided for in subheading 8481.80.90), the foregoing other than used goods
9902.15.92
Dosing module injectors, comprising parts of compression-ignition engine after-combustion treatment systems, measuring 30 cm or more but not over 50 cm in length, 30 cm or more but not over 50 cm in width and 10 cm or more but not over 30 cm in height (provided for in subheading 8481.80.90), such injectors other than used
9902.15.94
Fuel Injectors, other than used, each incorporating a valve and a micro-stamped orifice hole, certified by the importer as designed to deliver fuel to the combustion chamber of a gasoline engine with a pressure not exceeding 120 Mpa (1200 bar) (provided for in subheading 8481.80.90)
9902.15.96
New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)
9902.15.97
Used camshafts and crankshafts, designed for use solely or principally with compression-ignition internal combustion piston engines (other than spark-ignition internal combustion engines) (provided for in subheading 8483.10.30)
9902.15.98
New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more
9902.16.02
Flexplates designed for use in compression-ignition engines of a cylinder capacity equal to or greater than 6,000 cc but not exceeding 20,000 cc, such flexplates measuring 5 cm or more but not over 150 cm in length, 22 cm or more but not over 150 cm in width and 2 cm or more but not over 150 cm in height (provided for in subheading 8483.60.80)
9902.16.03
Flexplates designed for use in compression ignition engines with cylinder capacity ranging between 1000 cc to 5900 cc, such flexplates measuring 35 cm or more but not over 50 cm in length, 35 cm or more but not over 50 cm in width and 2 cm or more but not over 10 cm in height (provided for in subheading 8483.60.80)
9902.16.13
Submersible multi-phase motors designed for use with pumps, such motors cylindrical in shape, each having a diameter exceeding 12 cm but not exceeding 18 cm and a length exceeding 63 cm but not exceeding 80 cm, the foregoing having a power output exceeding 3 kW but not exceeding 14.92 kW (provided for in subheading 8501.52.40)
9902.16.14
Submersible multi-phase motors designed for use with pumps, such motors cylindrical in shape, each having a diameter exceeding 22 cm but not exceeding 35 cm and a length exceeding 150 cm but not exceeding 230 cm, the foregoing with a power output exceeding 149.2 kW but not exceeding 150 kW (provided for in subheading 8501.53.60)
9902.16.15
AC electric generators, each with a flywheel and an eddy-current loading device, the load being controlled magnetically (provided for in subheading 8501.61.00), designed for use in exercise equipment of subheading 9506.91
9902.16.17
Stator core and rotor core laminations, imported in pairs each comprising one stator core lamination and one rotor core lamination; with such stator core laminations having an exterior diameter of 26.42 cm and an inner diameter of 20.35 cm, weighing 4.14 kg or more but not over 6.72 kg; such rotor core laminations having an exterior diameter of 20.2 cm and an inner diameter of 14.0 cm, weighing 3.3 kg or more but not over 5.3 kg; the foregoing certified by the importer as designed to be used in the manufacture of generator motors for charging the battery of hybrid vehicles and of electric motors for propulsion of hybrid vehicles (provided for in subheading 8503.00.95)
9902.16.18
Power adapters designed for use with standard car cigarette lighter sockets having dual USB output ports with 12 W output per port (provided for in subheading 8504.40.95)
9902.16.27
Litterboxes, each with self-contained electric motor powered by an external adapter that plugs into a wall socket or electrical outlet and may have batteries for back-up, such devices which rake and/or disperse cat waste into a compartment after a certain amount of time has passed once the mechanism is triggered by cat entering the litterbox; the foregoing designed for domestic use (provided for in subheading 8509.80.50)
9902.16.28
Feeders, each with a self-contained electric motor powered by an external adapter that plugs into a wall socket or electrical outlet or uses batteries, such devices which can be programmed to disperse various quantities of food at pre-set times, designed for domestic use by dogs and cats (provided for in subheading 8509.80.50)
9902.16.29
Waterers, each with a self-contained electric motor powered through an external adapter that plugs into a wall socket or electrical outlet or uses batteries, such devices which filter a continuously flowing water fountain or replenish water when volume is below a certain fill level, the foregoing designed for domestic use by dogs and cats (provided for in subheading 8509.80.50)
9902.16.30
Feeders designed for use with fish, each with a self-contained electric motor powered by batteries, with retaining clips or clamps to attach to a household aquarium, the foregoing which can be programmed to disperse various quantities of food at preset times (provided for in subheading 8509.80.50)
9902.16.33
Stainless steel food beaters, designed for use solely on electromechanical hand-held food mixers suitable for domestic purposes (provided for in subheading 8509.90.55).
9902.16.34
Stainless steel dough hooks designed for use solely on electromechanical food hand mixers suitable for domestic purposes (provided for in subheading 8509.90.55)
9902.16.35
Electrothermal bowls designed for use with electromechanical stand food mixers of a kind used for domestic purposes, each bowl having a control panel with digital display (provided for in subheading 8509.90.55)
9902.16.36
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.7 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and two welded stainless steel side brackets with circular holes (provided for in subheading 8509.90.55)
9902.16.37
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)
9902.16.40
Used generators (alternators) of a kind used in conjunction with spark ignition or compression ignition internal combustion engines (provided for in subheading 8511.50.00)
9902.16.43
Heating units each combining a heater, a fan and a light for residential use, designed for permanent ceiling installation, each containing an adjustable louver mounted in the grille, such louver may be rotated 360 degrees for the flow of heat output to be manually self-positioned (provided for in subheading 8516.29.00)
9902.16.44
High-capacity heating units, designed to be permanently mounted into a wall and for use in residential households, each generating 1000 and 1500 W, containing a grille, with or without built-in thermostat (provided for in subheading 8516.29.00)
9902.16.45
Electrothermic steam irons of a kind used for domestic purposes, capable of operating without power cord connected to mains, each with detachable base (provided in subheading 8516.40.40)
9902.16.46
Electrothermic steam irons of a kind used for domestic purposes, each with a ceramic-coated cast aluminum sole plate (provided for in subheading 8516.40.40), the foregoing not capable of operating without power connected to mains
9902.16.47
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and with a door having an exterior molded plastic handle (provided for in subheading 8516.50.00)
9902.16.48
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and a door with exterior metal handle (provided for in subheading 8516.50.00)
9902.16.49
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm (provided for in subheading 8516.50.00)
9902.16.50
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 32 cm (provided for in subheading 8516.50.00)
9902.16.51
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)
9902.16.52
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)
9902.16.53
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of 56 liters or more but not over 58 liters, having a glass turntable plate with a diameter measuring 30 cm or more but not over 31 cm (provided for in subheading 8516.50.00)
9902.16.54
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 56 liters but not exceeding 58 liters, the foregoing having a glass rectangular turntable plate (provided for in subheading 8516.50.00)
9902.16.55
Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)
9902.16.56
Electrothermic multifunction grills of a kind used for domestic purposes, each incorporating a cooking plate for use as a grill, griddle or oven, with removable power cord with a thermostatic control (provided for in subheading 8516.60.60)
9902.16.57
Electrothermic dual-grid sandwich grilling appliances of a kind used for domestic purposes, each with a locking latch and floating upper lid (provided for in subheading 8516.60.60), the foregoing without thermostatic control
9902.16.58
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle; the foregoing excluding coffee makers with dome-shaped housing or designed for permanent installation into a wall, cabinet or shelf, and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading 8516.71.00)
9902.16.59
Electrothermic automatic coffee makers of a kind used for domestic purposes, each having a dome-shaped housing over the brewing chamber, the foregoing capable of brewing multiple servings and designed to heat all water in separate heating chamber before releasing heated water into brewing chamber (provided for in subheading 8516.71.00)
9902.16.60
Electrothermic siphon coffee brewers of a kind used for domestic purposes, each with upper globe-shaped chamber that seals to bottom carafe magnetically, the foregoing having an electronic control in base (provided for in subheading 8516.71.00)
9902.16.61
Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)
9902.16.62
Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using coffee capsules, each having a loading lever containing both stainless steel and plastic (provided for in subheading 8516.71.00)
9902.16.63
Electrothermic espresso makers of a kind used for domestic purposes, each with hydraulically activated "shower head" spray with automatic tamping and retraction functionality and magnetic locking drawer style filter, the foregoing without bayonet locking tabs (provided for in subheading 8516.71.00)
9902.16.64
Automatic drip coffee makers of a kind used for domestic purposes, each with an electronic programmable clock and with a front-access water reservoir and brew basket (provided for in subheading 8516.71.00); the foregoing other than coffee makers with removable water tank or with dome-shaped housing over brewing chamber
9902.16.65
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each with electronic clock and self-contained coffee holding chamber, the foregoing designed to be used without separate carafe (provided for in subheading 8516.71.00); the foregoing excluding coffee makers (i) designed for permanent installation in a wall, cabinet or shelf, (ii) with removable tank with a handle or (iii) with loading lever containing both stainless steel and plastics
9902.16.66
Electrothermic automatic coffee makers of a kind used for domestic purposes, each incorporated into a housing for permanent installation into a wall or cabinet or on a shelf and capable of remote operation via wireless connection to a smartphone or tablet (provided for in subheading 8516.71.00)
9902.16.67
Electrothermic toaster ovens of a kind used for domestic purposes, each incorporating a single-slot toaster opening on top of the oven (provided for in subheading 8516.72.00)
9902.16.68
Electrothermic painted metal dome-shaped kettles, of a kind used for domestic purposes, each with a circular thermometer display and a base containing a temperature control lever and power button (provided for in subheading 8516.79.00)
9902.16.69
Electrothermic stainless steel cylindrical kettles, of a kind used for domestic purposes, each with a liquid crystal display and operational control buttons and display on top of the handle and having a translucent capacity indicator behind the handle (provided for in subheading 8516.79.00)
9902.16.70
Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.71
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.72
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.73
Electrothermic sandwich cookers of a kind used for domestic purposes, designed to be used with round bread (provided for in subheading 8516.79.00)
9902.16.74
Electrothermic multifunctional cookers (multicookers) of a kind used for domestic purposes, each incorporating a timer and designed to prepare foods by various methods, including boiling, simmering, baking, frying, roasting or stewing (provided for in subheading 8516.79.00), the foregoing without a thermometer probe
9902.16.75
Electrothermic programmable slow cookers of a kind used for domestic purposes, with thermometer probe (provided for in subheading 8516.79.00), the foregoing without boiling and simmering functions
9902.16.76
Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of not less than 5 liters, rated more than 1000 W but not more than 1200 W (provided for in subheading 8516.79.00)
9902.16.77
Electrothermic rice cookers of a kind used for domestic purposes, rated 200 W or less, each with detachable power cord (provided for in subheading 8516.79.00)
9902.16.78
Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of not less than 5 liters and rated more than 1200 W but not more than 1400 W (provided for in subheading 8516.79.00)
9902.16.79
Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of less than 5 liters and rated from 800 W to 1000 W (provided for in subheading 8516.79.00)
9902.16.80
Electrothermic hot oil popcorn poppers of a kind used for domestic purposes, each with rotating metal wire stirring sticks and mechanical tumbler action (provided for in subheading 8516.79.00)
9902.16.81
Electrothermic plug-mounted room deodorizers of a kind used for domestic purposes, each with decorative non-plastic housing, not incorporating a rheostat; such appliances intended for use with fragrant wax, whether or not presented with wax (provided for in subheading 8516.79.00)
9902.16.82
Handheld electrothermic garment steamers of a kind used for domestic purposes, each with body of plastics, with output rated less than 1000 W, with retractable cord and weighing not more than 1 kg, whether or not packaged with a storage bag (provided for in subheading 8516.79.00)
9902.16.91
Printed circuit assemblies suitable for use solely with ground fault circuit interrupters (GFCIs) and arc fault circuit interrupters (AFCIs) of subheading 8536.30.80 (provided for in subheading 8538.90.30)
9902.16.95
Position sensors, each designed to emit digital pulses when rotated or moved linearly, consisting of an outer housing with dimensions of approximately 67 mm by 50 mm by 24 mm that contains an electrical connector and a printed circuit assembly, such sensors certified by the importer as designed for use in ground-based observatories (provided for in subheading 8543.70.45)
9902.16.96
Electrical cables and cable bundles for a voltage not exceeding 1,000 V, fitted with connectors (provided for in subheading 8544.42.90), the foregoing of a kind used with machines and apparatus for the manufacture or inspection of semiconductor devices of subheading 8486.20.00 or with optical instruments and appliances for inspecting semiconductor wafers of 9031.41.00
9902.17.05
Suspension system stabilizer bars of alloy steel, weighing not more than 40 kg, designed for use in Class 7 and Class 8 heavy duty trucks only (provided for in subheading 8708.80.65)
9902.17.06
Mufflers and exhaust pipes for motor vehicles of headings 8701 to 8705 (other than for tractors suitable for agricultural use) (provided for in subheading 8708.92.50) and parts thereof (provided for in subheading 8708.92.75)
9902.17.07
Bicycles each with no seat, no seat tube and no seat stay, designed to be pedaled by a user in a standing position only, such bicycles having both wheels not exceeding 63.5 cm in diameter (provided for in subheading 8712.00.15).
9902.17.11
"Z"-shaped water bottle holders (cages) of alloy or composite material, designed for use on bicycles (provided for in 8714.99.80)
9902.17.12
Wide angle reflectors, designed for use on bicycles (provided for in 8714.99.80)
9902.17.39
Signal generators, certified by the importer to be used for calibrating oscilloscopes, the foregoing each with five channels and no recording device (provided for in subheading 9030.89.01)
9902.17.40
Signal generators, certified by the importer to be used for calibrating radio frequency measurement equipment, each presented without a recording device (provided for in subheading 9030.89.01)
9902.17.42
Battery-operated chiming melody clock movements, complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9109.10.80)
9902.17.43
Mechanical clock movements, presented complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks or mantel clocks (provided for in subheading 9109.90.60)
9902.17.44
Chime melody rod assemblies and parts thereof, the foregoing suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9114.90.50)
9902.17.51
Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60)
9902.17.54
Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40)
9902.17.80
Fitness equipment designed for in-home use, each unit incorporating two independent treadmill decks with separately moving belts that rotate around a mechanical treadle and simultaneously move up and down during use, designed to allow progressive amounts of resistance and combine the functions of a treadmill, a stair climber and an elliptical machine (provided for in subheading 9506.91.00)
9902.17.88
Fitness equipment, each unit with pivoting handles and foot pedals with steel footbeds to allow the user to perform alternating movements (whether or not also with stationary handles), combining the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; with an electronic control console having a backlit liquid crystal display/light-emitting diode (LCD/LED) display and capable of the wireless exchange of data; having an integrated heart rate monitor with optional chest strap (provided for in subheading 9506.91.00)
9902.17.89
Adjustable-weight fitness dumbbells, each allowing the user to choose a weight from a range of either 2 kg or more but not over 26 kg or 4 kg or more but not over 46 kg, certified by the importer as incorporating rotating end dials that interlock disks with weight plates supported by a fitted plastic base (provided for in subheading 9506.91.00)
9902.18.03
Tripods of plastics designed for use with digital still image video cameras of subheading 8525.80.40, the foregoing measuring 12 cm or more but not over 20 cm in length (provided for in subheading 9620.00.50)
9903.08.14
Lead-acid storage batteries, other than of a kind used for starting piston engines or as the primary source of electrical power for electrically powered vehicles of subheading 8703.80.00 and 8703.90.01 (provided for in subheading 8507.20.80)
9903.08.15
Electrothermic coffee or tea makers, of a kind used for domestic purposes (provided for in subheading 8516.71)
9903.40.05
Radial tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.10 or 4011.20.10)
9903.40.10
Other tires of a kind used on motor cars (other than racing cars), station wagons, sport utility vehicles, vans and on-the-highway light trucks (provided for in subheading 4011.10.50 or 4011.20.50)
9903.41.10
Footwear with outer soles of leather and uppers wholly or in part of leather, and footwear with outer soles of rubber or plastics and uppers having an exterior surface area predominantly of leather, the foregoing provided for in chapter 64, except (a) slip-on footwear of a type not suitable for outdoor use, without backs or backstraps, having outer soles with a thickness of less than 5 mm and with less than 20 mm difference between the thickness of the bottom at the ball of the foot and at the heel, and (b) footwear which is designed for a sporting activity and has, or has provision for, attached spikes, sprigs, stops, clips, bars or the like, and skating boots, ski-boots and cross-country ski footwear, wrestling boots, boxing boots and cycling shoes
9903.41.15
Automatic data processing machines, of the type of which the constituent units are integrated in the same housing, whether finished or unfinished, which incorporate a microprocessor-based calculating mechanism, are capable of handling data words of at least 16-bits off the microprocessor, and are designed for use with a non-cathode-ray tube (non-CRT) display unit, whether or not capable of use without an external power source (provided for in subheading 8471.30 or 8471.41)
9903.89.61
Fuselages and fuselage sections, wings and wing assemblies (other than wings having exterior surfaces of carbon composite material), horizontal stabilizers, and vertical stabilizers as defined in U.S. note 21(t), suitable for use solely or principally with new airplanes and other aircraft of an unladen weight over 30,000 kg as described in subheading 9903.89.05 (described in statistical reporting number 8803.30.0030)
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
0505Skins and other parts of birds, with their feathers or down,
feathers and parts of feathers (whether or not with trimmed
edges) and down, not further worked than cleaned,
disinfected or treated for preservation; powder and waste
of feathers or parts of feathers:
0505.10.00Feathers of a kind used for stuffing; downFree20%
Meeting with ASTM D4522, Section 2.2 IDFB Testing Regulations, Part 2, Sections 2.2, 2.3. Part 7 and Part 11-B:
0505.10.00 50 Feathers
kg
55 Down
kg
Other:
0505.10.00 60 Feathers
kg
65 Down
kg
0505.90Other:
0505.90.20Feather meal and waste2.3%Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)20%
20 Feather meal
kg
40 Other
kg
0505.90.60 00 Other
kg
Free20%