Search Results:63
7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10
In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.15.00
Pickled
7208.10.30.00
Of a thickness of 4.75 mm or more
7208.10.60.00
Of a thickness of less than 4.75 mm
7208.25
Of a thickness of 4.75 mm or more:
7208.25.30.00
Of high-strength steel
7208.25.60.00
Other
7208.26.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.00.30
High-strength steel
7208.26.00.60
Other
7208.27.00
Of a thickness of less than 3 mm
7208.27.00.40
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7208.27.00.45
Other
7208.27.00.60
Other
7208.36.00
Of a thickness exceeding 10 mm
7208.36.00.30
High-strength steel
7208.36.00.60
Other
7208.37.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.00.30
High-strength steel
7208.37.00.60
Other
7208.38.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.00.15
High-strength steel
7208.38.00.30
With untrimmed edges
7208.38.00.90
Other
7208.39.00
Of a thickness of less than 3 mm
7208.39.00.20
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7208.39.00.25
Other
7208.39.00.30
With untrimmed edges
7208.39.00.90
Other
7208.40
Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30
Of a thickness of 4.75 mm or more
7208.40.30.30
Of a thickness exceeding 10 mm
7208.40.30.60
Other
7208.40.60
Of a thickness of less than 4.75 mm
7208.40.60.30
Of a thickness less than 3 mm
7208.40.60.60
Other
7208.51.00
Of a thickness exceeding 10 mm
7208.51.00.30
Universal mill plate
7208.51.00.45
Of high-strength steel
7208.51.00.60
Other
7208.52.00.00
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.53.00.00
Of a thickness of 3 mm or more but less than 4.75 mm
7208.54.00.00
Of a thickness of less than 3 mm
7208.90.00.00
Other
9903.80.05
Hot-rolled sheet, provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70
9903.80.07
Hot-rolled plate, in coils, provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting numbers 7211.14.0030 and 7211.14.0045) or 7225.30.30
9903.80.11
Plate in cut lengths, provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50
9903.80.65
Hot-rolled sheet (provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70)
9903.80.67
Hot-rolled plate, in coils (provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting number 7211.14.0030 or 7211.14.0045) or 7225.30.30)
9903.80.71
Plate in cut lengths (provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50)
9903.81.25
Hot-rolled sheet (provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70)
9903.81.27
Hot-rolled plate, in coils (provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting number 7211.14.0030 or 7211.14.0045) or 7225.30.30)
9903.81.31
Plate in cut lengths (provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50)
9903.80.05
Hot-rolled sheet, provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70
9903.80.07
Hot-rolled plate, in coils, provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting numbers 7211.14.0030 and 7211.14.0045) or 7225.30.30
9903.80.11
Plate in cut lengths, provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50
9903.80.65
Hot-rolled sheet (provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70)
9903.80.67
Hot-rolled plate, in coils (provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting number 7211.14.0030 or 7211.14.0045) or 7225.30.30)
9903.80.71
Plate in cut lengths (provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50)
9903.81.25
Hot-rolled sheet (provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70)
9903.81.27
Hot-rolled plate, in coils (provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting number 7211.14.0030 or 7211.14.0045) or 7225.30.30)
9903.81.31
Plate in cut lengths (provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50)
Heading/
Subheading
Stat
Suffix
Article Description Unit of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suffix
Article Description Unit of
Quantity
Rates of Duty
1 2
General Special
7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.15 00 Pickled
kg
Free0.4¢/kg + 20%
Other:
7208.10.30 00 Of a thickness of 4.75 mm or more
kg
Free20%
7208.10.60 00 Of a thickness of less than 4.75 mm
kg
Free20%
Other, in coils, not further worked than hot-rolled, pickled:
7208.25Of a thickness of 4.75 mm or more:
7208.25.30 00 Of high-strength steel
kg
Free20%
7208.25.60 00 Other
kg
Free0.4¢/kg + 20%
7208.26.00Of a thickness of 3 mm or more but less than 4.75 mmFree0.4¢/kg + 20%
30 High-strength steel
kg
60 Other
kg
7208.27.00Of a thickness of less than 3 mmFree0.4¢/kg + 20%
High-strength steel:
7208.27.00 40 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
45 Other
kg
60 Other
kg
Other, in coils, not further worked than hot-rolled:
7208.36.00Of a thickness exceeding 10 mmFree20%
30 High-strength steel
kg
60 Other
kg
7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree20%
30 High-strength steel
kg
60 Other
kg
7208.38.00Of a thickness of 3 mm or more but less than 4.75 mmFree20%
15 High-strength steel
kg
Other:
7208.38.00 30 With untrimmed edges
kg
90 Other
kg
7208.39.00Of a thickness of less than 3 mmFree20%
High-strength steel:
7208.39.00 20 “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
kg
25 Other
kg
Other:
7208.39.00 30 With untrimmed edges
kg
90 Other
kg
7208.40Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30Of a thickness of 4.75 mm or moreFree20%
30 Of a thickness exceeding 10 mm
kg
60 Other
kg
7208.40.60Of a thickness of less than 4.75 mmFree20%
30 Of a thickness less than 3 mm
kg
60 Other
kg
Other, not in coils, not further worked than hot-rolled:
7208.51.00Of a thickness exceeding 10 mmFree20%
30 Universal mill plate
kg
Other:
7208.51.00 45 Of high-strength steel
kg
60 Other
kg
7208.52.00 00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
kg
Free20%
7208.53.00 00 Of a thickness of 3 mm or more but less than 4.75 mm
kg
Free20%
7208.54.00 00 Of a thickness of less than 3 mm
kg
Free20%
7208.90.00 00 Other
kg
Free20%