HTS
2023 HTSA Revision 9
Search Results:12
7209.16.00
Of a thickness exceeding 1 mm but less than 3 mm
7209.16.00.40
“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
7209.16.00.45
Other
7209.16.00.60
Other
7209.16.00.70
Annealed
7209.16.00.91
Other
9903.80.08
Cold-rolled sheet and other products, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00
9903.80.68
Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00)
9903.81.28
Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00)
9903.80.08
Cold-rolled sheet and other products, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00
9903.80.68
Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00)
9903.81.28
Cold-rolled sheet, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00)
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 7209 | Flat-rolled products of iron or nonalloy steel, of a width of | |||||
| In coils, not further worked than cold-rolled (cold-reduced): | ||||||
| 7209.15.00 | 00 | Of a thickness of 3 mm or more | kg | Free | 0.4¢/kg + 20% | |
| 7209.16.00 | Of a thickness exceeding | Free | 0.4¢/kg + 20% | |||
| Of high-strength steel: | ||||||
| Annealed: | ||||||
| 7209.16.00 | 40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |||
| 45 | Other | kg | ||||
| 60 | Other | kg | ||||
| Other: | ||||||
| 7209.16.00 | 70 | Annealed | kg | |||
| 91 | Other | kg | ||||
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding | Free | 0.4¢/kg + 20% | |||
| Of high-strength steel: | ||||||
| Annealed: | ||||||
| 7209.17.00 | 40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |||
| 45 | Other | kg | ||||
| 60 | Other | kg | ||||
| Other: | ||||||
| 7209.17.00 | 70 | Annealed | kg | |||
| 91 | Other | kg | ||||
| 7209.18 | Of a thickness of less than 0.5 mm: | |||||
| 7209.18.15 | Of high-strength steel | Free | 0.4¢/kg + 20% | |||
| 30 | Annealed | kg | ||||
| 60 | Other | kg | ||||
| Other: | ||||||
| 7209.18.25 | Of a thickness of less than 0.361 mm (blackplate) | Free | 20% | |||
| 20 | Annealed | kg | ||||
| 85 | Other | kg | ||||
| 7209.18.60 | Other | Free | 0.4¢/kg + 20% | |||
| 20 | Annealed | kg | ||||
| 90 | Other | kg | ||||
| Not in coils, not further worked than cold-rolled (cold-reduced): | ||||||
| 7209.25.00 | 00 | Of a thickness of 3 mm or more | kg | Free | 0.4¢/kg + 20% | |
| 7209.26.00 | 00 | Of a thickness exceeding | kg | Free | 0.4¢/kg + 20% | |
| 7209.27.00 | 00 | Of a thickness of 0.5 mm or more but not exceeding | kg | Free | 0.4¢/kg + 20% | |
| 7209.28.00 | 00 | Of a thickness of less than 0.5 mm | kg | Free | 0.4¢/kg + 20% | |
| 7209.90.00 | 00 | Other | kg | Free | 0.4¢/kg + 20% | |