HTS CODE | Harmonized Tariff Schedule

Simple Tool for searching Harmonized Tariff Schedule of the United States.

Search Results:58
7228.10.00
Bars and rods, of high-speed steel
7228.10.00.10
Not cold-formed
7228.10.00.30
With a maximum cross-sectional dimension of less than 18 mm
7228.10.00.60
With a maximum cross-sectional dimension of 18 mm or more
7228.20
Bars and rods, of silico-manganese steel:
7228.20.10.00
Not cold-formed
7228.20.50.00
Cold-formed
7228.30
Of tool steel (other than high-speed steel):
7228.30.20.00
Of ball-bearing steel
7228.30.40.00
Of chipper knife steel, not cold-formed
7228.30.60.00
Other
7228.30.80
Other
7228.30.80.05
Of high-nickel alloy steel
7228.30.80.10
Concrete reinforcing bars and rods
7228.30.80.15
With a diameter or cross section measuring less than 76 mm
7228.30.80.41
With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
7228.30.80.45
With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
7228.30.80.70
With a diameter or cross section exceeding 228 mm
7228.40.00.00
Other bars and rods, not further worked than forged
7228.50
Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10
Of tool steel (other than high-speed steel)
7228.50.10.10
Of ball-bearing steel
7228.50.10.20
Of round or rectangular cross section with surfaces ground, milled or polished
7228.50.10.40
Other
7228.50.10.60
Of round or rectangular cross section with surfaces ground, milled or polished
7228.50.10.80
Other
7228.50.50
Other
7228.50.50.05
Of high-nickel alloy steel
7228.50.50.15
With a diameter or cross section measuring less than 76 mm
7228.50.50.40
With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
7228.50.50.70
With a diameter or cross section exceeding 228 mm
7228.60
Other bars and rods:
7228.60.10
Of tool steel (other than high-speed steel)
7228.60.10.30
Of ball-bearing steel
7228.60.10.60
Other
7228.60.60.00
Not cold-formed
7228.60.80.00
Cold-formed
7228.70
Angles, shapes and sections:
7228.70.30
Hot-rolled, not drilled, not punched and not otherwise advanced
7228.70.30.10
U, I, H and T sections
7228.70.30.20
Angles
7228.70.30.41
Other
7228.70.30.60
Angles
7228.70.30.81
Other
7228.70.60.00
Other
7228.80.00.00
Hollow drill bars and rods
9903.80.45
Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.50
Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041)
9903.80.51
Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070)
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
9903.80.45
Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.50
Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041)
9903.80.51
Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070)
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00Bars and rods, of high-speed steelFree32%
10 Not cold-formed
kg
Cold-formed:
7228.10.00 30 With a maximum cross-sectional dimension of less than 18 mm
kg
60 With a maximum cross-sectional dimension of 18 mm or more
kg
7228.20Bars and rods, of silico-manganese steel:
7228.20.10 00 Not cold-formed
kg
Free28%
7228.20.50 00 Cold-formed
kg
Free28%
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30Of tool steel (other than high-speed steel):
7228.30.20 00 Of ball-bearing steel
kg
Free29%
7228.30.40 00 Of chipper knife steel, not cold-formed
kg
Free28%
7228.30.60 00 Other
kg
Free29%
7228.30.80OtherFree28%
05 Of high-nickel alloy steel
kg
10 Concrete reinforcing bars and rods
kg
Other:
7228.30.80 15 With a diameter or cross section measuring less than 76 mm
kg
41 With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
kg
45 With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
kg
70 With a diameter or cross section exceeding 228 mm
kg
7228.40.00 00 Other bars and rods, not further worked than forged
kg
Free28%
7228.50Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10Of tool steel (other than high-speed steel)Free29%
10 Of ball-bearing steel
kg
Other:
With a maximum cross-sectional dimension of less than 18 mm:
7228.50.10 20 Of round or rectangular cross section with surfaces ground, milled or polished
kg
40 Other
kg
With a maximum cross-sectional dimension of 18 mm or more:
7228.50.10 60 Of round or rectangular cross section with surfaces ground, milled or polished
kg
80 Other
kg
7228.50.50OtherFree28%
05 Of high-nickel alloy steel
kg
Other:
7228.50.50 15 With a diameter or cross section measuring less than 76 mm
kg
40 With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
kg
70 With a diameter or cross section exceeding 228 mm
kg
7228.60Other bars and rods:
7228.60.10Of tool steel (other than high-speed steel)Free29%
30 Of ball-bearing steel
kg
60 Other
kg
Other:
7228.60.60 00 Not cold-formed
kg
Free28%
7228.60.80 00 Cold-formed
kg
Free28%
7228.70Angles, shapes and sections:
7228.70.30Hot-rolled, not drilled, not punched and not otherwise advancedFree10%
10 U, I, H and T sections
kg
Other:
With a maximum cross-sectional dimension of 76 mm or more:
7228.70.30 20 Angles
kg
41 Other
kg
With a maximum cross-sectional dimension of less than 76 mm:
7228.70.30 60 Angles
kg
81 Other
kg
7228.70.60 00 Other
kg
Free28%
7228.80.00 00 Hollow drill bars and rods
kg
Free30%