HTS
2023 HTSA Revision 9
Search Results:87
8414
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; parts thereof:
8414.10.00.00
Vacuum pumps
8414.20.00.00
Hand- or foot-operated air pumps
8414.30
Compressors of a kind used in refrigerating equipment (including air conditioning):
8414.30.40.00
Not exceeding 1/4 horsepower
8414.30.80
Other
8414.30.80.10
Not exceeding 200 horsepower
8414.30.80.20
Exceeding 200 horsepower
8414.30.80.30
For motor vehicles
8414.30.80.50
Exceeding 1/4 horsepower but not exceeding 1 horsepower
8414.30.80.60
Exceeding 1 horsepower but not exceeding 3 horsepower
8414.30.80.70
Exceeding 3 horsepower but not exceeding 10 horsepower
8414.30.80.80
Exceeding 10 horsepower
8414.30.80.90
For ammonia
8414.40.00.00
Air compressors mounted on a wheeled chassis for towing
8414.51
Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W:
8414.51.30.00
Ceiling fans for permanent installation
8414.51.90
Other
8414.51.90.60
For permanent installation
8414.51.90.90
Other
8414.59
Other:
8414.59.10.00
Blowers for pipe organs
8414.59.15.00
Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines
8414.59.30.00
Turbochargers and superchargers
8414.59.65
Other
8414.59.65.40
Suitable for use with motor vehicles
8414.59.65.60
Centrifugal
8414.59.65.90
Axial
8414.59.65.95
Other
8414.60.00.00
Hoods having a maximum horizontal side not exceeding 120 cm
8414.70.00.00
Gas-tight biological safety cabinets
8414.80
Other, except parts:
8414.80.05.00
Turbochargers and superchargers
8414.80.16
Other
8414.80.16.05
Not exceeding 746 W
8414.80.16.15
Exceeding 746 W but not exceeding 4.48 kW
8414.80.16.25
Exceeding 4.48 kW but not exceeding 8.21 kW
8414.80.16.35
Exceeding 8.21 kW but not exceeding 11.19 kW
8414.80.16.40
Exceeding 11.19 kW but not exceeding 19.4 kW
8414.80.16.45
Exceeding 19.4 kW but not exceeding 74.6 kW
8414.80.16.55
Exceeding 74.6 kW
8414.80.16.60
Not exceeding 11.19 kW
8414.80.16.65
Exceeding 11.19 kW but under 22.38 kW
8414.80.16.70
22.38 kW and over but not exceeding 74.6 kW
8414.80.16.75
Exceeding 74.6 kW
8414.80.16.80
Other
8414.80.16.85
Under 0.57 cubic meters per minute
8414.80.16.90
Other
8414.80.20
Other compressors
8414.80.20.05
Refrigerant recovery units
8414.80.20.15
Centrifugal and axial
8414.80.20.55
Not exceeding 186.5 kW
8414.80.20.65
Exceeding 186.5 kW but not exceeding 746 kW
8414.80.20.75
Exceeding 746 kW
8414.80.90.00
Other
8414.90
Parts:
8414.90.10
Of fans (including blowers) and ventilating or recycling hoods
8414.90.10.40
Of fans of subheading 8414.51
8414.90.10.80
Other
8414.90.30.00
Stators and rotors of goods of subheading 8414.30
8414.90.41
Other
8414.90.41.20
Compressor housings
8414.90.41.40
Other
8414.90.41.45
Compressor housings
8414.90.41.55
Other
8414.90.41.65
Compressor housings
8414.90.41.80
Impeller covers and hubs
8414.90.41.90
Other
8414.90.91
Other
8414.90.91.40
Of vacuum pumps
8414.90.91.80
Other
9902.15.53
Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)
9902.15.54
Exhaust fans for permanent ceiling installation designed to be used in the bathroom, each containing an electric motor with an output wattage not exceeding 125 W, with or without a light, with volume flow between 1.35 m3 and 2.04 m3 per minute and having a sound level greater than 2.2 sones but not exceeding 6.8 sones (provided for in subheading 8414.51.30)
9902.15.55
Exhaust fans designed for permanent ceiling installation in bathrooms, each with a self-contained electric DC brush-less motor with an output wattage not exceeding 125 W, with or without a light, such fans having a sound level rating greater than 0.1 sone but not exceeding 1.2 sones (provided for in subheading 8414.51.30)
9902.15.56
Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)
9902.15.57
Chimney range hoods, island range hoods or under-the-cabinet range hoods, of a kind normally used in the household, designed for permanent installation to a wall or ceiling, each such hood measuring over 121 cm on its maximum horizontal side, presented with or without a blower; the foregoing, if presented without blower, incorporating other ventilating equipment (provided in subheading 8414.80.90)
9902.15.58
Pedestal column assemblies comprising parts for oscillating electric fans, presented in the assembled condition, each consisting of upper and lower tubes of steel, with thermoplastic collet (sleeve) covering the connection point of such tubes together with accompanying collet insert and allowing the two tubes to be locked at adjustable intervals (provided for in subheading 8414.90.10)
9902.15.59
Plastic grilles (provided for in subheading 8414.90.10), each incorporating a light-emitting diode (LED) light on the exterior perimeter capable of providing continuous light, certified by the importer as designed to be used with exhaust fans for permanent installation and generating 2.83 m3 per minute, such fans of a kind for residential use and described in subheading 8414.51.30
8414.90.10.40
Of fans of subheading 8414.51
8414.90.30.00
Stators and rotors of goods of subheading 8414.30
9902.15.53
Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)
9902.15.54
Exhaust fans for permanent ceiling installation designed to be used in the bathroom, each containing an electric motor with an output wattage not exceeding 125 W, with or without a light, with volume flow between 1.35 m3 and 2.04 m3 per minute and having a sound level greater than 2.2 sones but not exceeding 6.8 sones (provided for in subheading 8414.51.30)
9902.15.55
Exhaust fans designed for permanent ceiling installation in bathrooms, each with a self-contained electric DC brush-less motor with an output wattage not exceeding 125 W, with or without a light, such fans having a sound level rating greater than 0.1 sone but not exceeding 1.2 sones (provided for in subheading 8414.51.30)
9902.15.56
Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)
9902.15.57
Chimney range hoods, island range hoods or under-the-cabinet range hoods, of a kind normally used in the household, designed for permanent installation to a wall or ceiling, each such hood measuring over 121 cm on its maximum horizontal side, presented with or without a blower; the foregoing, if presented without blower, incorporating other ventilating equipment (provided in subheading 8414.80.90)
9902.15.58
Pedestal column assemblies comprising parts for oscillating electric fans, presented in the assembled condition, each consisting of upper and lower tubes of steel, with thermoplastic collet (sleeve) covering the connection point of such tubes together with accompanying collet insert and allowing the two tubes to be locked at adjustable intervals (provided for in subheading 8414.90.10)
9902.15.59
Plastic grilles (provided for in subheading 8414.90.10), each incorporating a light-emitting diode (LED) light on the exterior perimeter capable of providing continuous light, certified by the importer as designed to be used with exhaust fans for permanent installation and generating 2.83 m3 per minute, such fans of a kind for residential use and described in subheading 8414.51.30
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 8414 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; parts thereof: | |||||
| 8414.10.00 | 00 | Vacuum pumps | No. | 2.5% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| 8414.20.00 | 00 | Hand- or foot-operated air pumps | No. | 3.7% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| 8414.30 | Compressors of a kind used in refrigerating equipment (including air conditioning): | |||||
| 8414.30.40 | 00 | Not exceeding 1/4 horsepower | No. | Free | 35% | |
| 8414.30.80 | Other | Free | 35% | |||
| Screw type: | ||||||
| 8414.30.80 | 10 | Not exceeding 200 horsepower | No. | |||
| 20 | Exceeding 200 horsepower | No. | ||||
| Other: | ||||||
| For all refrigerants except ammonia | ||||||
| 8414.30.80 | 30 | For motor vehicles | No. | |||
| Other: | ||||||
| 8414.30.80 | 50 | Exceeding 1/4 horsepower but not exceeding 1 horsepower | No. | |||
| 60 | Exceeding 1 horsepower but not exceeding 3 horsepower | No. | ||||
| 70 | Exceeding 3 horsepower but not exceeding 10 horsepower | No. | ||||
| 80 | Exceeding 10 horsepower | No. | ||||
| 90 | For ammonia | No. | ||||
| 8414.40.00 | 00 | Air compressors mounted on a wheeled chassis for towing | No. | 2.7% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| Fans: | ||||||
| 8414.51 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W: | |||||
| 8414.51.30 | 00 | Ceiling fans for permanent installation | No. | 4.7% | Free (A,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| 8414.51.90 | Other | 4.7% | Free (A,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | ||
| 60 | For permanent installation | No. | ||||
| 90 | Other | No. | ||||
| 8414.59 | Other: | |||||
| 8414.59.10 | 00 | Blowers for pipe organs | No. | Free | 35% | |
| 8414.59.15 | 00 | Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines | No. | Free | 35% | |
| Other | ||||||
| 8414.59.30 | 00 | Turbochargers and superchargers | No. | 2.3% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| 8414.59.65 | Other | 2.3% | Free (A*,AU,B,BH,C,CL,CO,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | ||
| 40 | Suitable for use with motor vehicles | No. | ||||
| Other: | ||||||
| 8414.59.65 | 60 | Centrifugal | No. | |||
| 90 | Axial | No. | ||||
| 95 | Other | No. | ||||
| 8414.60.00 | 00 | Hoods having a maximum horizontal side not exceeding | No. | Free | 35% | |
| 8414.70.00 | 00 | Gas-tight biological safety cabinets | No. | Free | 35% | |
| 8414.80 | Other, except parts: | |||||
| Air compressors: | ||||||
| 8414.80.05 | 00 | Turbochargers and superchargers | No. | Free | 35% | |
| 8414.80.16 | Other | Free | 35% | |||
| Stationary: | ||||||
| Reciprocating: | ||||||
| 8414.80.16 | 05 | Not exceeding | No. | |||
| 15 | Exceeding | No. | ||||
| 25 | Exceeding | No. | ||||
| 35 | Exceeding | No. | ||||
| 40 | Exceeding | No. | ||||
| 45 | Exceeding | No. | ||||
| 55 | Exceeding | No. | ||||
| Rotary: | ||||||
| 8414.80.16 | 60 | Not exceeding | No. | |||
| 65 | Exceeding | No. | ||||
| 70 | No. | |||||
| 75 | Exceeding | No. | ||||
| 80 | Other | No. | ||||
| Portable: | ||||||
| 8414.80.16 | 85 | Under | No. | |||
| 90 | Other | No. | ||||
| 8414.80.20 | Other compressors | Free | 35% | |||
| 05 | Refrigerant recovery units | No. | ||||
| Other: | ||||||
| 8414.80.20 | 15 | Centrifugal and axial | No. | |||
| Other, including reciprocating and rotary: | ||||||
| 8414.80.20 | 55 | Not exceeding | No. | |||
| 65 | Exceeding | No. | ||||
| 75 | Exceeding | No. | ||||
| 8414.80.90 | 00 | Other | No. | 3.7% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% |
| 8414.90 | Parts: | |||||
| 8414.90.10 | Of fans (including blowers) and ventilating or recycling hoods | 4.7% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | ||
| 40 | Of fans of subheading 8414.51 | kg | ||||
| 80 | Other | kg | ||||
| Of compressors: | ||||||
| 8414.90.30 | 00 | Stators and rotors of goods of subheading 8414.30 | No. | Free | 35% | |
| 8414.90.41 | Other | Free | 35% | |||
| Of refrigerating and air conditioning compressors: | ||||||
| 8414.90.41 | 20 | Compressor housings | No. | |||
| 40 | Other | kg | ||||
| Other: | ||||||
| Of compressors of subheading 8414.40: | ||||||
| 8414.90.41 | 45 | Compressor housings | No. | |||
| 55 | Other | kg | ||||
| Other: | ||||||
| 8414.90.41 | 65 | Compressor housings | No. | |||
| 80 | Impeller covers and hubs | No. | ||||
| 90 | Other | kg | ||||
| 8414.90.91 | Other | Free | 35% | |||
| 40 | Of vacuum pumps | kg | ||||
| 80 | Other | kg | ||||