HTS
2023 HTSA Revision 9
Search Results:82
8483
Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof:
8483.10
Transmission shafts (including camshafts and crankshafts) and cranks:
8483.10.10
Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines
8483.10.10.10
For motorcycles
8483.10.10.30
Other
8483.10.10.50
Other
8483.10.30
Other
8483.10.30.10
For vehicles of chapter 87
8483.10.30.50
Other
8483.10.50.00
Other transmission shafts and cranks
8483.20
Housed bearings, incorporating ball or roller bearings:
8483.20.40
Flange, take-up, cartridge and hanger units
8483.20.40.40
Incorporating ball bearings
8483.20.40.80
Incorporating roller bearings
8483.20.80
Other
8483.20.80.40
Incorporating ball bearings
8483.20.80.80
Incorporating roller bearings
8483.30
Bearing housings; plain shaft bearings:
8483.30.40
Flange, take-up, cartridge and hanger units
8483.30.40.40
Ball or roller bearing type
8483.30.40.80
Other
8483.30.80
Other
8483.30.80.20
Ball or roller bearing type
8483.30.80.40
Other
8483.30.80.55
Rod end bearings
8483.30.80.65
Other
8483.30.80.70
Spherical
8483.30.80.90
Other
8483.40
Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters:
8483.40.10.00
Torque converters
8483.40.30
Imported for use with machines for making cellulosic pulp, paper or paperboard
8483.40.30.40
Fixed ratio speed changers
8483.40.30.80
Other
8483.40.50
Other
8483.40.50.10
Fixed ratio speed changers
8483.40.50.50
Other
8483.40.70.00
Other speed changers
8483.40.80.00
Ball or roller screws
8483.40.90.00
Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
8483.50
Flywheels and pulleys, including pulley blocks:
8483.50.40.00
Gray-iron awning or tackle pulleys, not over 6.4 cm in wheel diameter
8483.50.60.00
Flywheels
8483.50.90
Other
8483.50.90.40
Grooved pulleys
8483.50.90.80
Other
8483.60
Clutches and shaft couplings (including universal joints):
8483.60.40
Clutches and universal joints
8483.60.40.40
Clutches
8483.60.40.80
Universal joints
8483.60.80.00
Other
8483.90
Toothed wheels, chain sprockets and other transmission elements presented separately; parts:
8483.90.10
Chain sprockets and parts thereof
8483.90.10.10
Forged
8483.90.10.50
Other
8483.90.20.00
Parts of flange, take-up, cartridge and hanger units
8483.90.30.00
Other
8483.90.50
Parts of gearing, gear boxes and other speed changers
8483.90.50.10
Forged gear blanks
8483.90.50.90
Other
8483.90.70.00
Parts of articles of subheading 8483.20
8483.90.80
Other
8483.90.80.10
Parts of articles of subheading 8483.60.80
8483.90.80.40
Parts of universal joints
8483.90.80.80
Other
9902.15.96
New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)
9902.15.97
Used camshafts and crankshafts, designed for use solely or principally with compression-ignition internal combustion piston engines (other than spark-ignition internal combustion engines) (provided for in subheading 8483.10.30)
9902.15.98
New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more
9902.15.99
Plain shaft sputter bearings without housing (the foregoing other than spherical bearings), each weighing 200 g or more and with journal diameter measuring 117 mm or more (provided for in subheading 8483.30.80)
9902.16.01
Used fixed ratio speed changers (provided for in subheading 8483.40.50), other than transmissions for the vehicles of headings 8701, 8702, 8703, 8704, and 8705
9902.16.02
Flexplates designed for use in compression-ignition engines of a cylinder capacity equal to or greater than 6,000 cc but not exceeding 20,000 cc, such flexplates measuring 5 cm or more but not over 150 cm in length, 22 cm or more but not over 150 cm in width and 2 cm or more but not over 150 cm in height (provided for in subheading 8483.60.80)
9902.16.03
Flexplates designed for use in compression ignition engines with cylinder capacity ranging between 1000 cc to 5900 cc, such flexplates measuring 35 cm or more but not over 50 cm in length, 35 cm or more but not over 50 cm in width and 2 cm or more but not over 10 cm in height (provided for in subheading 8483.60.80)
9902.16.04
Ring gears, with diameter 30 cm or more but not over 200 cm and height of 6 cm or more but not over 30 cm, the foregoing to be assembled onto the periphery of a flexplate or flywheel for a diesel engine ranging in cylinder capacity equal to or greater than 5,000 cc but not exceeding 95,000 cc (provided for in subheading 8483.90.50)
8483.90.70.00
Parts of articles of subheading 8483.20
8483.90.80.10
Parts of articles of subheading 8483.60.80
9902.15.96
New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)
9902.15.97
Used camshafts and crankshafts, designed for use solely or principally with compression-ignition internal combustion piston engines (other than spark-ignition internal combustion engines) (provided for in subheading 8483.10.30)
9902.15.98
New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more
9902.15.99
Plain shaft sputter bearings without housing (the foregoing other than spherical bearings), each weighing 200 g or more and with journal diameter measuring 117 mm or more (provided for in subheading 8483.30.80)
9902.16.01
Used fixed ratio speed changers (provided for in subheading 8483.40.50), other than transmissions for the vehicles of headings 8701, 8702, 8703, 8704, and 8705
9902.16.02
Flexplates designed for use in compression-ignition engines of a cylinder capacity equal to or greater than 6,000 cc but not exceeding 20,000 cc, such flexplates measuring 5 cm or more but not over 150 cm in length, 22 cm or more but not over 150 cm in width and 2 cm or more but not over 150 cm in height (provided for in subheading 8483.60.80)
9902.16.03
Flexplates designed for use in compression ignition engines with cylinder capacity ranging between 1000 cc to 5900 cc, such flexplates measuring 35 cm or more but not over 50 cm in length, 35 cm or more but not over 50 cm in width and 2 cm or more but not over 10 cm in height (provided for in subheading 8483.60.80)
9902.16.04
Ring gears, with diameter 30 cm or more but not over 200 cm and height of 6 cm or more but not over 30 cm, the foregoing to be assembled onto the periphery of a flexplate or flywheel for a diesel engine ranging in cylinder capacity equal to or greater than 5,000 cc but not exceeding 95,000 cc (provided for in subheading 8483.90.50)
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| Heading/ Subheading |
Stat Suffix |
Article Description | Unit of Quantity |
Rates of Duty | ||
| 1 | 2 | |||||
| General | Special | |||||
| 8483 | Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof: | |||||
| 8483.10 | Transmission shafts (including camshafts and crankshafts) and cranks: | |||||
| Camshafts and crankshafts: | ||||||
| 8483.10.10 | Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines | 2.5% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | ||
| For vehicles of chapter 87: | ||||||
| 8483.10.10 | 10 | For motorcycles | No. kg | |||
| 30 | Other | No. kg | ||||
| 50 | Other | No. kg | ||||
| 8483.10.30 | Other | 2.5% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 35% | ||
| 10 | For vehicles of chapter 87 | No. kg | ||||
| 50 | Other | No. kg | ||||
| 8483.10.50 | 00 | Other transmission shafts and cranks | kg | Free | 30% | |
| 8483.20 | Housed bearings, incorporating ball or roller bearings: | |||||
| 8483.20.40 | Flange, take-up, cartridge and hanger units | 4.5% | Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 40 | Incorporating ball bearings | No. | ||||
| 80 | Incorporating roller bearings | No. | ||||
| 8483.20.80 | Other | 4.5% | Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 40 | Incorporating ball bearings | No. | ||||
| 80 | Incorporating roller bearings | No. | ||||
| 8483.30 | Bearing housings; plain shaft bearings: | |||||
| 8483.30.40 | Flange, take-up, cartridge and hanger units | 4.5% | Free (A,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 40 | Ball or roller bearing type | kg | ||||
| 80 | Other | kg | ||||
| 8483.30.80 | Other | 4.5% | Free (A+,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| Bearing housings: | ||||||
| 8483.30.80 | 20 | Ball or roller bearing type | kg | |||
| 40 | Other | kg | ||||
| Plain shaft bearings: | ||||||
| With housing: | ||||||
| 8483.30.80 | 55 | Rod end bearings | No. kg | |||
| 65 | Other | No. kg | ||||
| Without housing: | ||||||
| 8483.30.80 | 70 | Spherical | No. kg | |||
| 90 | Other | No. kg | ||||
| 8483.40 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters: | |||||
| 8483.40.10 | 00 | Torque converters | No. | Free | 27.5% | |
| Gear boxes and other speed changers: | ||||||
| Fixed ratio speed changers, multiple and variable ratio speed changers each ratio of which is selected by manual manipulation: | ||||||
| 8483.40.30 | Imported for use with machines for making cellulosic pulp, paper or paperboard | Free | 27.5% | |||
| 40 | Fixed ratio speed changers | No. | ||||
| 80 | Other | No. | ||||
| 8483.40.50 | Other | 2.5% | Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 27.5% | ||
| 10 | Fixed ratio speed changers | No. | ||||
| 50 | Other | No. | ||||
| 8483.40.70 | 00 | Other speed changers | No. | 25ยข each + 3.9% | Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | $4.50 each + 65% |
| 8483.40.80 | 00 | Ball or roller screws | No. | 3.8% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| 8483.40.90 | 00 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately | No. | 2.5% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 27.5% |
| 8483.50 | Flywheels and pulleys, including pulley blocks: | |||||
| 8483.50.40 | 00 | Gray-iron awning or tackle pulleys, not over | No. | 5.7% | Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| Other: | ||||||
| 8483.50.60 | 00 | Flywheels | No. | 2.8% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| 8483.50.90 | Other | 2.8% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 40 | Grooved pulleys | No. | ||||
| 80 | Other | kg | ||||
| 8483.60 | Clutches and shaft couplings (including universal joints): | |||||
| 8483.60.40 | Clutches and universal joints | 2.8% | Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 40 | Clutches | No. | ||||
| 80 | Universal joints | No. | ||||
| 8483.60.80 | 00 | Other | No. | 2.8% | Free (A+,AU,B,BH, C,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| 8483.90 | Toothed wheels, chain sprockets and other transmission elements presented separately; parts: | |||||
| 8483.90.10 | Chain sprockets and parts thereof | 2.8% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% | ||
| 10 | Forged | kg | ||||
| 50 | Other | kg | ||||
| Parts of bearing housings and plain shaft bearings: | ||||||
| 8483.90.20 | 00 | Parts of flange, take-up, cartridge and hanger units | kg | 4.5% | Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| 8483.90.30 | 00 | Other | kg | 4.5% | Free (A+,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 45% |
| 8483.90.50 | Parts of gearing, gear boxes and other speed changers | 2.5% | Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) | 27.5% | ||
| 10 | Forged gear blanks | No. | ||||
| 90 | Other | kg | ||||
| Other: | ||||||
| 8483.90.70 | 00 | Parts of articles of subheading 8483.20 | kg | 5.5% | Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG) | 45% |
| 8483.90.80 | Other | 2.8% | Free (A+,AU,B,BH, C,CL,CO,D,E, IL,JO,KR,MA, OM,P,PA,PE,S,SG) | 45% | ||
| 10 | Parts of articles of subheading 8483.60.80 | kg | ||||
| 40 | Parts of universal joints | kg | ||||
| 80 | Other | kg | ||||