Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement

Portland cement, aluminous cement, slag cement, supersulfate cement and similar hydraulic cements, whether or not colored or in the form of clinkers:

White cement, whether or not artificially colored

Aluminous cement

Other hydraulic cements

Dental cements and other dental fillings; bone reconstruction cements

Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations for facades, indoor walls, floors, ceilings or the like:

Glazier's putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings

Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 3801:

Prepared additives for cements, mortars or concretes:

Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings:

Having soles and uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is poly(vinyl chloride), whether or not supported or lined with poly(vinyl chloride) but not otherwise supported or lined

Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper)

Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather)

Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics except (1) footwear having a foxing or a foxing-like band applied or molded at the sole and overlapping the upper and (2) except footwear (other than footwear having uppers which from a point 3 cm above the top of the outer sole are entirely of non- molded construction formed by sewing the parts together and having exposed on the outer surface a substantial portion of functional stitching) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather

Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather)

Having uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is leather

Footwear having uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is leather

Of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is leather

Of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics and not suitable to be finished into footwear (1) having foxing or a foxing-like band applied or molded at the sole and overlapping the upper, or (2) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather

Of textile materials of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is leather

Uppers of which less than 50 percent of the external surface area (including any leather, rubber or plastics accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is textile materials

Uppers of which less than 50 percent of the external surface area (including any leather, rubber or plastics accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is textile materials

Panels, boards, tiles, blocks and similar articles of vegetable fiber, of straw or of shavings, chips, particles, sawdust or other waste, of wood, agglomerated with cement, plaster or other mineral binders

Articles of cement, of concrete or of artificial stone, whether or not reinforced:

Of stone agglomerated with binders other than cement

Articles of asbestos-cement, of cellulose fiber-cement or the like:

Vinyl, resin or cement coated

Vinyl, resin or cement coated

Copper mattes; cement copper (precipitated copper)

Other reciprocating positive displacement pumps

Other rotary positive displacement pumps

Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass:

Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry molds of sand; parts thereof:

Designed for use with ceramic paste, unhardened cements and plastering materials

Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

By plaster, cement, ceramics or glass deposit

Cylindrical leadless resistors (including metal film, metal oxide and thick cement film)

Other (including metal film, metal oxide and thick cement film)

Any aircraft engine or propeller, or any part or accessory of either, previously imported, with respect to which the duty was paid upon such previous importation, if (1) reimported without having been advanced in value or improved in condition by any process of manufacture or other means while abroad, after having been exported under loan, lease or rent to an aircraft owner or operator as a temporary replacement for an aircraft engine being overhauled, repaired, rebuilt or reconditioned in the United States, and (2) reimported by or for the account of the person who exported it from the United States

Resin cement based on calcium carbonate and silicone resins (CAS Nos. 471-34-1 and 68037-83-2) (provided for in subheading 3214.10.00)

Replacement doors of plastics, designed for use on waterproof camera housings (provided for in subheading 3926.90.99)

Replacement side doors of plastics, designed for housings for digital still image video cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99)

Footwear for men with outer soles and uppers of rubber or plastics, such uppers of neoprene measuring 7 mm in thickness, injected with polyurethane on the exterior and covered with knitted fabric wholly of polyester on the interior, with rubber lug bottoms laminated with cement to the upper; such footwear covering the ankle, whose height does not exceed 35.56 cm; waterproof, valued not over $36/pair and designed to be permanently affixed to fishing waders (provided for in subheading 6402.91.50)

Women's sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like, with outer soles of rubber or plastics and uppers textile materials, such uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to ch. 64) is leather (provided for in subheading 6404.11.20)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior, such footwear measuring in height (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm, with a cemented rubber sole; the foregoing waterproof, valued per pair at $40 or higher, with each boot having a slit in the top of upper collar designed to allow boot to be affixed to a fishing wader (provided for in subheading 6404.19.20)

Footwear for women, with uppers of vegetable fibers, with open toes or open heels, having uppers of which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.36)

Footwear (other than for women) with uppers of vegetable fibers, with open toes or open heels, having uppers of which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.36)

Footwear (other than footwear for men) with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, with open toes or open heels, having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin and having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.37)

Footwear for women, with open toes or open heels, containing 10 percent or more by weight of rubber or plastics, with uppers of textile materials and having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing with outer soles of rubber or plastics and not having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.39)

Footwear (other than for women) with open toes or open heels, containing 10 percent or more by weight of rubber or plastics, with uppers of textile materials and having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing with outer soles of rubber or plastics and not having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.39)

Footwear for men, with uppers of which over 50 percent of the external surface is polyurethane measuring 1.4 mm in thickness and with cemented outer soles of which over 50 percent of the external surface is felt, having the characteristics required for normal use, including durability and strength; the foregoing not covering the ankle and valued $20 per pair or higher (provided for in subheading 6405.90.90)

Purchased and entered pursuant to the Secretary of Agriculture's Special Limited Global Import Quota Announcement

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 1

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 2

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 3

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 4

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 5

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 6

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 7

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 8

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 9

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 10

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 11

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 12

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 13

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 14

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 15

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 16

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 17

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 18

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 19

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 20

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 21

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 22

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 23

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 24

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 25

Purchased and entered pursuant to the Secretary of Agriculture's Special Cotton Import Quota Announcement Number 26

Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement

Portland cement, aluminous cement, slag cement, supersulfate cement and similar hydraulic cements, whether or not colored or in the form of clinkers:

White cement, whether or not artificially colored

Aluminous cement

Other hydraulic cements

Dental cements and other dental fillings; bone reconstruction cements

Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations for facades, indoor walls, floors, ceilings or the like:

Glazier's putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings

Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 3801:

Prepared additives for cements, mortars or concretes:

Panels, boards, tiles, blocks and similar articles of vegetable fiber, of straw or of shavings, chips, particles, sawdust or other waste, of wood, agglomerated with cement, plaster or other mineral binders

Articles of cement, of concrete or of artificial stone, whether or not reinforced:

Of stone agglomerated with binders other than cement

Vinyl, resin or cement coated

Vinyl, resin or cement coated

Copper mattes; cement copper (precipitated copper)

Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry molds of sand; parts thereof:

Designed for use with ceramic paste, unhardened cements and plastering materials

By plaster, cement, ceramics or glass deposit

Cylindrical leadless resistors (including metal film, metal oxide and thick cement film)

Other (including metal film, metal oxide and thick cement film)

Resin cement based on calcium carbonate and silicone resins (CAS Nos. 471-34-1 and 68037-83-2) (provided for in subheading 3214.10.00)

Footwear for men with outer soles and uppers of rubber or plastics, such uppers of neoprene measuring 7 mm in thickness, injected with polyurethane on the exterior and covered with knitted fabric wholly of polyester on the interior, with rubber lug bottoms laminated with cement to the upper; such footwear covering the ankle, whose height does not exceed 35.56 cm; waterproof, valued not over $36/pair and designed to be permanently affixed to fishing waders (provided for in subheading 6402.91.50)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior, such footwear measuring in height (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm, with a cemented rubber sole; the foregoing waterproof, valued per pair at $40 or higher, with each boot having a slit in the top of upper collar designed to allow boot to be affixed to a fishing wader (provided for in subheading 6404.19.20)

Footwear for men, with uppers of which over 50 percent of the external surface is polyurethane measuring 1.4 mm in thickness and with cemented outer soles of which over 50 percent of the external surface is felt, having the characteristics required for normal use, including durability and strength; the foregoing not covering the ankle and valued $20 per pair or higher (provided for in subheading 6405.90.90)