HTS CODE | Harmonized Tariff Schedule

Simple Tool for searching Harmonized Tariff Schedule of the United States.

Search Results:68
8414.90.41.20
Compressor housings
8414.90.41.45
Compressor housings
8414.90.41.65
Compressor housings
8431.49.90.25
Cast axle housings
8431.49.90.35
Cast axle housings
8431.49.90.55
Cast axle housings
8471.41.01
Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined
8471.50.01
Processing units other than those of subheading 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
8471.60
Input or output units, whether or not containing storage units in the same housing:
8483
Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof:
8483.30
Bearing housings; plain shaft bearings:
8518.29.40.00
Without housing, having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 50 mm, for telecommunication use
8527
Reception apparatus for radiobroadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock:
8537.10.30.00
Assembled with outer housing or supports, for the goods of headings 8421, 8422, 8450 or 8516
8716.10.00
Trailers and semi-trailers for housing or camping
9902.12.20
Replacement doors of plastics, designed for use on waterproof camera housings (provided for in subheading 3926.90.99)
9902.12.21
Replacement side doors of plastics, designed for housings for digital still image video cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99)
9902.12.50
Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.56
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.15.99
Plain shaft sputter bearings without housing (the foregoing other than spherical bearings), each weighing 200 g or more and with journal diameter measuring 117 mm or more (provided for in subheading 8483.30.80)
9902.16.06
Power back door (liftgate) actuator assemblies for the motor vehicles of headings 8701 to 8705, each consisting of a brushless electric DC motor that generates between 350 and 400 W, an electromagnetic clutch, a clutch magnet, a clutch flywheel, a clutch plate, a sensor and a housing (provided for in subheading 8501.31.40)
9902.16.07
DC motors of an output between 190 W and 290 W, weighing less than 1 kg, each in a cylindrical housing with height of approximately 55 mm and a radius of approximately 45 mm (provided for in subheading 8501.31.40)
9902.16.55
Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)
9902.16.58
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle; the foregoing excluding coffee makers with dome-shaped housing or designed for permanent installation into a wall, cabinet or shelf, and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading 8516.71.00)
9902.16.59
Electrothermic automatic coffee makers of a kind used for domestic purposes, each having a dome-shaped housing over the brewing chamber, the foregoing capable of brewing multiple servings and designed to heat all water in separate heating chamber before releasing heated water into brewing chamber (provided for in subheading 8516.71.00)
9902.16.64
Automatic drip coffee makers of a kind used for domestic purposes, each with an electronic programmable clock and with a front-access water reservoir and brew basket (provided for in subheading 8516.71.00); the foregoing other than coffee makers with removable water tank or with dome-shaped housing over brewing chamber
9902.16.66
Electrothermic automatic coffee makers of a kind used for domestic purposes, each incorporated into a housing for permanent installation into a wall or cabinet or on a shelf and capable of remote operation via wireless connection to a smartphone or tablet (provided for in subheading 8516.71.00)
9902.16.81
Electrothermic plug-mounted room deodorizers of a kind used for domestic purposes, each with decorative non-plastic housing, not incorporating a rheostat; such appliances intended for use with fragrant wax, whether or not presented with wax (provided for in subheading 8516.79.00)
9902.16.89
Lamp-holder housings of porcelain, containing sockets (provided for subheading 8536.61.00)
9902.16.95
Position sensors, each designed to emit digital pulses when rotated or moved linearly, consisting of an outer housing with dimensions of approximately 67 mm by 50 mm by 24 mm that contains an electrical connector and a printed circuit assembly, such sensors certified by the importer as designed for use in ground-based observatories (provided for in subheading 8543.70.45)
9903.41.15
Automatic data processing machines, of the type of which the constituent units are integrated in the same housing, whether finished or unfinished, which incorporate a microprocessor-based calculating mechanism, are capable of handling data words of at least 16-bits off the microprocessor, and are designed for use with a non-cathode-ray tube (non-CRT) display unit, whether or not capable of use without an external power source (provided for in subheading 8471.30 or 8471.41)
9903.41.40
Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 45 cm but not exceeding 50 cm (provided for in subheading 8528.72.32 or 8528.72.48)
9903.41.45
Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 50 cm but not exceeding 52 cm (provided for in subheading 8528.72.32 or 8528.72.48)
8414.90.41.20
Compressor housings
8414.90.41.45
Compressor housings
8414.90.41.65
Compressor housings
8431.49.90.25
Cast axle housings
8431.49.90.35
Cast axle housings
8431.49.90.55
Cast axle housings
8471.41.01
Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined
8471.50.01
Processing units other than those of subheading 8471.41 or 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
8471.60
Input or output units, whether or not containing storage units in the same housing:
8483
Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof:
8483.30
Bearing housings; plain shaft bearings:
8518.29.40.00
Without housing, having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 50 mm, for telecommunication use
8527
Reception apparatus for radiobroadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock:
8537.10.30.00
Assembled with outer housing or supports, for the goods of headings 8421, 8422, 8450 or 8516
8716.10.00
Trailers and semi-trailers for housing or camping
9902.12.20
Replacement doors of plastics, designed for use on waterproof camera housings (provided for in subheading 3926.90.99)
9902.12.21
Replacement side doors of plastics, designed for housings for digital still image video cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99)
9902.12.50
Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.56
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.15.99
Plain shaft sputter bearings without housing (the foregoing other than spherical bearings), each weighing 200 g or more and with journal diameter measuring 117 mm or more (provided for in subheading 8483.30.80)
9902.16.06
Power back door (liftgate) actuator assemblies for the motor vehicles of headings 8701 to 8705, each consisting of a brushless electric DC motor that generates between 350 and 400 W, an electromagnetic clutch, a clutch magnet, a clutch flywheel, a clutch plate, a sensor and a housing (provided for in subheading 8501.31.40)
9902.16.07
DC motors of an output between 190 W and 290 W, weighing less than 1 kg, each in a cylindrical housing with height of approximately 55 mm and a radius of approximately 45 mm (provided for in subheading 8501.31.40)
9902.16.55
Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)
9902.16.58
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle; the foregoing excluding coffee makers with dome-shaped housing or designed for permanent installation into a wall, cabinet or shelf, and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading 8516.71.00)
9902.16.59
Electrothermic automatic coffee makers of a kind used for domestic purposes, each having a dome-shaped housing over the brewing chamber, the foregoing capable of brewing multiple servings and designed to heat all water in separate heating chamber before releasing heated water into brewing chamber (provided for in subheading 8516.71.00)
9902.16.64
Automatic drip coffee makers of a kind used for domestic purposes, each with an electronic programmable clock and with a front-access water reservoir and brew basket (provided for in subheading 8516.71.00); the foregoing other than coffee makers with removable water tank or with dome-shaped housing over brewing chamber
9902.16.66
Electrothermic automatic coffee makers of a kind used for domestic purposes, each incorporated into a housing for permanent installation into a wall or cabinet or on a shelf and capable of remote operation via wireless connection to a smartphone or tablet (provided for in subheading 8516.71.00)
9902.16.81
Electrothermic plug-mounted room deodorizers of a kind used for domestic purposes, each with decorative non-plastic housing, not incorporating a rheostat; such appliances intended for use with fragrant wax, whether or not presented with wax (provided for in subheading 8516.79.00)
9902.16.89
Lamp-holder housings of porcelain, containing sockets (provided for subheading 8536.61.00)
9902.16.95
Position sensors, each designed to emit digital pulses when rotated or moved linearly, consisting of an outer housing with dimensions of approximately 67 mm by 50 mm by 24 mm that contains an electrical connector and a printed circuit assembly, such sensors certified by the importer as designed for use in ground-based observatories (provided for in subheading 8543.70.45)
9903.41.15
Automatic data processing machines, of the type of which the constituent units are integrated in the same housing, whether finished or unfinished, which incorporate a microprocessor-based calculating mechanism, are capable of handling data words of at least 16-bits off the microprocessor, and are designed for use with a non-cathode-ray tube (non-CRT) display unit, whether or not capable of use without an external power source (provided for in subheading 8471.30 or 8471.41)
9903.41.40
Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 45 cm but not exceeding 50 cm (provided for in subheading 8528.72.32 or 8528.72.48)
9903.41.45
Complete color television receivers containing in a single housing apparatus for receiving and displaying off-the-air each standard U.S. broadcast channel, with or without external speakers, having a single picture tube intended for direct viewing, with a video display diagonal exceeding 50 cm but not exceeding 52 cm (provided for in subheading 8528.72.32 or 8528.72.48)
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
8414Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; parts thereof:
8414.10.00 00 Vacuum pumps
No.
2.5%Free(A,AU,B,BH,C,CA,CL,CO,D,E,IL,JO,JP,KR,MA,MX,OM,P,PA,PE,SG)35%
8414.20.00 00 Hand- or foot-operated air pumps
No.
3.7%Free(A,AU,B,BH,C,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
8414.30Compressors of a kind used in refrigerating equipment (including air conditioning):
8414.30.40 00 Not exceeding 1/4 horsepower
No.
Free35%
8414.30.80OtherFree35%
Screw type:
8414.30.80 10 Not exceeding 200 horsepower
No.
20 Exceeding 200 horsepower
No.
Other:
For all refrigerants except ammonia
8414.30.80 30 For motor vehicles
No.
Other:
8414.30.80 50 Exceeding 1/4 horsepower but not exceeding 1 horsepower
No.
60 Exceeding 1 horsepower but not exceeding 3 horsepower
No.
70 Exceeding 3 horsepower but not exceeding 10 horsepower
No.
80 Exceeding 10 horsepower
No.
90 For ammonia
No.
8414.40.00 00 Air compressors mounted on a wheeled chassis for towing
No.
2.7%Free(A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
Fans:
8414.51Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W:
8414.51.30 00 Ceiling fans for permanent installation
No
4.7%Free(A,AU,BH,C,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
8414.51.90Other4.7%Free(A,AU,BH,C,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
60 For permanent installation
No.
90 Other
No.
8414.59Other:
8414.59.10 00 Blowers for pipe organs
No.
Free35%
8414.59.15 00 Fans of a kind used solely or principally for cooling microprocessors, telecommunications apparatus, automatic data processing machines or units of automatic data processing machines
No.
Free35%
Other
8414.59.30 00 Turbochargers and superchargers
No.
2.3%Free(A,AU,B,BH,C,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
8414.59.65Other2.3%Free(A,AU,B,BH,C,CA,CL,CO,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
40 Suitable for use with motor vehicles
No.
Other:
8414.59.65 60 Centrifugal
No.
90 Axial
No.
95 Other
No.
8414.60.00 00 Hoods having a maximum horizontal side not exceeding 120 cm
No.
Free35%
8414.80Other, except parts:
Air compressors:
8414.80.05 00 Turbochargers and superchargers
No.
Free35%
8414.80.16OtherFree35%
Stationary:
Reciprocating:
8414.80.16 05 Not exceeding 746 W
No.
15 Exceeding 746 W but not exceeding 4.48 kW
No.
25 Exceeding 4.48 kW but not exceeding 8.21 kW
No.
35 Exceeding 8.21 kW but not exceeding 11.19 kW
No.
40 Exceeding 11.19 kW but not exceeding 19.4 kW
No.
45 Exceeding 19.4 kW but not exceeding 74.6 kW
No.
55 Exceeding 74.6 kW
No.
Rotary:
8414.80.16 60 Not exceeding 11.19 kW
No.
65 Exceeding 11.19 kW but under 22.38 kW
No.
70 22.38 kW and over but not exceeding 74.6 kW
No.
75 Exceeding 74.6 kW
No.
80 Other
No.
Portable:
8414.80.16 85 Under 0.57 cubic meters per minute
No.
90 Other
No.
8414.80.20Other compressorsFree35%
05 Refrigerant recovery units
No.
Other:
8414.80.20 15 Centrifugal and axial
No.
Other, including reciprocating and rotary:
8414.80.20 55 Not exceeding 186.5 kW
No.
65 Exceeding 186.5 kW but not exceeding 746 kW
No.
75 Exceeding 746 kW
No.
8414.80.90 00 Other
No.
3.7%Free(A,AU,B,BH,C,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,SG)35%
8414.90Parts:
8414.90.10Of fans (including blowers) and ventilating or recycling hoods4.7%Free (A,AU,B,BH,C,CA,CL,CO,D,E,IL,JO,MA,MX,OM,P,PA,PE,SG) 0.4% (KR)35%
40 Of fans of subheading 8414.51
kg
80 Other
kg
Of compressors:
8414.90.30 00 Stators and rotors of goods of subheading 8414.30
No.
Free35%
8414.90.41OtherFree35%
Of refrigerating and air conditioning compressors:
8414.90.41 20 Compressor housings
No.
40 Other
kg
Other:
Of compressors of subheading 8414.40:
8414.90.41 45 Compressor housings
No.
55 Other
kg
Other:
8414.90.41 65 Compressor housings
No.
80 Impeller covers and hubs
No.
90 Other
kg
8414.90.90OtherFree35%
40 Of vacuum pumps
kg
80 Other
kg