HTS CODE | Harmonized Tariff Schedule

Simple Tool for searching Harmonized Tariff Schedule of the United States.

Search Results:300
2905.11.20.10
Imported for use in chemical production, including production of aldehydes, plastics, olefins and resins
3206.49.10.00
Concentrated dispersions of pigments in plastics materials
3405
Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading 3404:
3812
Prepared rubber accelerators; compound plasticizers for rubber or plastics, not elsewhere specified or included; antioxidizing preparations and other compound stabilizers for rubber or plastics:
3812.20
Compound plasticizers for rubber or plastics:
3812.20.10.00
Containing any aromatic or modified aromatic plasticizer
3824.99.70.00
Mixtures of dibromo neopentyl glycol; Polydibromophenylene oxide; Tetrabromobisphenol-A-carbonate oligomers; and Electroplating chemical and electroless plating solutions and other materials for printed circuit boards, plastics and metal finishings
3915
Waste, parings and scrap, of plastics:
3915.90.00
Of other plastics
3915.90.00.10
Of polyethylene terephthalate (PET) plastics
3916
Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics:
3916.90
Of other plastics:
3917
Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics:
3917.10
Artificial guts (sausage casings) of hardened protein or of cellulosic plastics materials:
3917.10.10.00
Of cellulosic plastics materials
3917.29.00
Of other plastics
3918
Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter:
3918.10.31
Over 70 percent by weight of plastics
3918.90
Of other plastics:
3919
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls:
3920
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials:
3920.43
Containing by weight not less than 6 percent of plasticizers:
3920.99
Of other plastics:
3921
Other plates, sheets, film, foil and strip, of plastics:
3921.12.11.00
Over 70 percent by weight of plastics
3921.13.11.00
Over 70 percent by weight of plastics
3921.19.00.00
Of other plastics
3921.90.11.00
Over 70 percent by weight of plastics
3921.90.25.10
Over 70 percent by weight of plastics
3922
Baths, shower baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics:
3923
Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics:
3923.29.00.00
Of other plastics
3924
Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics:
3925
Builders' ware of plastics, not elsewhere specified or included:
3926
Other articles of plastics and articles of other materials of headings 3901 to 3914:
3926.20.60.00
Plastic rainwear, including jackets, coats, ponchos, parkas and slickers, featuring an outer shell of polyvinyl chloride plastic with or without attached hoods, valued not over $10 per unit
3926.90.25.00
Handles and knobs, not elsewhere specified or included, of plastics
3926.90.87.00
Flexible plastic document binders with tabs, rolled or flat
3926.90.94.00
Cards, not punched, suitable for use as, or in making, jacquard cards; Jacquard cards and jacquard heads for power-driven weaving machines, and parts thereof; and Transparent sheeting of plastics containing 30 percent or more by weight of lead
3926.90.99.05
Elastic bands made wholly of plastics
4202
Trunks, suitcases, vanity cases, attache cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; traveling bags, insulated food or beverage bags, toiletry bags, knapsacks and backpacks, handbags, shopping bags, wallets, purses, map cases, cigarette cases, tobacco pouches, tool bags, sports bags, bottle cases, jewelry boxes, powder cases, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanized fiber or of paperboard, or wholly or mainly covered with such materials or with paper:
4202.12
With outer surface of plastics or of textile materials:
4202.22
With outer surface of sheeting of plastics or of textile materials:
4202.22.15.00
With outer surface of sheeting of plastics
4202.29.10.00
Of plastics
4202.32
With outer surface of sheeting of plastics or of textile materials:
4202.32.10.00
Of reinforced or laminated plastics
4202.39.10.00
Of plastics
4202.92
With outer surface of sheeting of plastics or of textile materials:
4202.92.04.00
Beverage bags whose interior incorporates only a flexible plastic container of a kind for storing and dispensing potable beverages through attached flexible tubing
4202.99.10.00
Of plastics
4410.11.00.30
Surface-covered with decorative laminates of plastic
4410.19.00.30
Surface-covered with decorative laminates of plastic
4814.20.00.00
Wallpaper and similar wallcoverings, consisting of paper coated or covered, on the face side, with a grained, embossed, colored, design-printed or otherwise decorated layer of plastics
5407.30.10.00
Over 60 percent by weight of plastics
5603.11.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.12.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.13.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.14.90.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.91.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.92.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.93.00.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5603.94.90.10
Impregnated, coated or covered with material other than or in addition to rubber, plastics, wood pulp or glass fibers; "imitation suede" (223)
5604
Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics:
5607
Twine, cordage, ropes and cables, whether or not plaited or braided and whether or not impregnated, coated, covered or sheathed with rubber or plastics:
5903
Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902:
5903.10.15.00
Over 60 percent by weight of plastics
5903.10.20
Over 70 percent by weight of rubber or plastics
5903.20.15.00
Over 60 percent by weight of plastics
5903.20.20.00
Over 70 percent by weight of rubber or plastics
5903.90.15.00
Over 60 percent by weight of plastics
5903.90.20.00
Over 70 percent by weight of rubber or plastics
5906.91.20.00
Over 70 percent by weight of rubber or plastics
5906.99.20.00
Over 70 percent by weight of rubber or plastics
5910.00
Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material:
6113.00.10
Having an outer surface impregnated, coated, covered, or laminated with rubber or plastics material which completely obscures the underlying fabric
6116.10
Impregnated, coated or covered with plastics or rubber:
6116.10.13.00
Containing over 50 percent by weight of plastics or rubber
6116.10.44.00
Containing over 50 percent by weight of plastics or rubber
6210.20.30.00
Having an outer surface impregnated, coated, covered, or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.20.70.00
Having an outer surface impregnated, coated, covered, or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.30.30.00
Having an outer surface impregnated, coated, covered, or laminated with rubber or plastics material which completely obscure the underlying fabric
6210.30.70.00
Having an outer surface impregnated, coated, covered, or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.40.15.00
Having an outer surface impregnated, coated, cover or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.40.28.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.40.35.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.40.75.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.50.03.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.50.12.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.50.35.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6210.50.75.00
Having an outer surface impregnated, coated, covered or laminated with rubber or plastics material which completely obscures the underlying fabric
6212.90.00.10
Of cotton or cotton and rubber or plastics (359)
6212.90.00.20
Of wool or wool and rubber or plastics (459)
6212.90.00.30
Of man-made fibers or man-made fibers and rubber or plastics (659)
6216.00.13.00
Containing over 50 percent by weight of plastics or rubber
6216.00.19.00
Containing over 50 percent by weight of plastics or rubber
6401
Waterproof footwear with outer soles and uppers of rubber or plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes:
6401.99.80.00
Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper)
6402
Other footwear with outer soles and uppers of rubber or plastics:
6402.91.05.00
Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather)
6402.91.40
Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics except (1) footwear having a foxing or a foxing-like band applied or molded at the sole and overlapping the upper and (2) except footwear (other than footwear having uppers which from a point 3 cm above the top of the outer sole are entirely of non- molded construction formed by sewing the parts together and having exposed on the outer surface a substantial portion of functional stitching) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather
6402.99.04.00
Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics (except footwear having foxing or a foxing-like band applied or molded at the sole and overlapping the upper and except footwear designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather)
6402.99.27
Sandals and similar footwear of plastics, produced in one piece by molding
6403
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather:
6404
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials:
6406.10.45.00
Of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics and not suitable to be finished into footwear (1) having foxing or a foxing-like band applied or molded at the sole and overlapping the upper, or (2) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather
6406.10.60.00
Of rubber or plastics
6406.10.72.00
Uppers of which less than 50 percent of the external surface area (including any leather, rubber or plastics accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is textile materials
6406.10.85.00
Uppers of which less than 50 percent of the external surface area (including any leather, rubber or plastics accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is textile materials
6406.20.00.00
Outer soles and heels, of rubber or plastics
6406.90.30
Of rubber or plastics
6506.10.30
Of reinforced or laminated plastics
6506.91.00
Of rubber or plastics
6702.10
Of plastics:
7117.90.10.00
Necklaces, valued not over 30 cents per dozen, composed wholly of plastic shapes mounted on fiber string
7117.90.75.00
Of plastics
7210.70
Painted, varnished or coated with plastics:
7212.40
Painted, varnished or coated with plastics:
7217.90.10.00
Coated with plastics
7314.31.10.00
Wire fencing plated or coated with zinc, whether or not covered with plastic material
7314.42.00
Coated with plastics
7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm:
7607
Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:
8007.00.31.00
Tin foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm
8211.91.50
Knives with rubber or plastic handles
8215.99.20.00
With rubber or plastic handles
8419.89.95.80
For rubber and plastics
8420.10.90.40
Calendering or other rolling machines for rubber and plastics
8465
Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials:
8477
Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof:
8480
Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:
8532.25.00
Dielectric of paper or plastics
8547.20.00.00
Insulating fittings of plastics
8708.99.81.05
Brake hoses of plastics, with attached fittings
9003.11.00.00
Of plastics
9021.21.40.00
Of plastics
9021.29.40.00
Of plastics
9024
Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics), and parts and accessories thereof:
9401.80.20
Of reinforced or laminated plastics
9401.90.35
Of rubber or plastics
9403.70
Furniture of plastics:
9403.70.40
Of reinforced or laminated plastics
9403.90.40
Of reinforced or laminated plastics
9404
Mattress supports; articles of bedding and similar furnishing (for example, mattresses, quilts, eiderdowns, cushions, pouffes and pillows) fitted with springs or stuffed or internally fitted with any material or of cellular rubber or plastics, whether or not covered:
9404.21.00
Of cellular rubber or plastics, whether or not covered
9405.92.00.00
Of plastics
9406.90.00.50
Animal sheds of plastic
9505.10.40
Of plastics
9606.21
Of plastics, not covered with textile material:
9607.19.00.20
Fitted with chain scoops of plastic
9607.19.00.40
Fitted with continuous plastic filament
9612.10.10
Measuring less than 30 mm in width, permanently put up in plastic or metal cartridges (whether or not containing spools) of a kind used in typewriters, automatic data processing or other machines
9614.00.28.30
Of plastics
9615.11
Of hard rubber or plastics:
9615.90.40.00
Of rubber or plastics, not set with imitation pearls or imitation gemstones
9619.00.05.00
Of plastics
9620.00.50.00
Of plastics
9810.00.85.00
Cellulosic plastics materials imported for use in artificial kidney machines or apparatus by a hospital or by a patient pursuant to prescription of a physician
9902.11.52
α-Alkenes, C14-C20, polymers with maleic anhydride, 2-(1-piperazinyl) ethylimides, plasticized with diisononyl phthalate (CAS No. 28553-12-0) and bis(1-methylethyl)-naphthalene (CAS No. 38640-62-9) (provided for in subheading 3911.90.90)
9902.11.57
Industrial grade nitrocellulose, having a nitrogen content of less than 12.4 percent on a dry weight basis, damped with an alcohol content of 28 to 32 percent by weight (CAS No. 9004-70-0), presented in fiber drums each containing 85 kg, 100 kg, 110 kg or 120 kg of such nitrocellulose, certified by the importer as made from at least 50 percent cotton linter or wood pulp and as having each such drum lined with an antistatic plastic bag and equipped with a coupling for mechanical unloading (provided for in subheading 3912.20.00)
9902.11.58
Industrial grade nitrocellulose, having a nitrogen content of less than 12.4 percent on a dry weight basis, damped with an alcohol content of 33 to 37 percent by weight (CAS No. 9004-70-0), presented in fiber drums each containing 85 kg, 100 kg, 110 kg or 120 kg of such nitrocellulose, the foregoing certified by the importer as made from at least 80 percent cotton linters, wood pulp and ethanol, with such fiber drums each lined with an antistatic plastic bag and equipped with a coupling for mechanical unloading (provided for in subheading 3912.20.00)
9902.11.80
Insulated tubes of plastics, not reinforced, without fittings, presented in the form of hose, the foregoing tubes having polyethylene pipes inserted therein and suitable for use in hot water supply or heating systems (provided for in subheading 3917.32.00)
9902.11.84
Sheets of plastics of poly(methyl methacrylate), noncellular and not reinforced, laminated, supported or similarly combined with other materials, not flexible, the foregoing of a kind used to produce counter tops or edging, cabinet tops, faces or edges for home or office furnishings (provided for in subheading 3920.51.50)
9902.11.95
Cutlery of plastics, each piece individually wrapped in polypropylene film, presented with such wrapped cutlery joined together by skewers for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40)
9902.11.96
Cutlery of plastics, presented with quantities of identical cutlery items joined together by paper wrapping or paper banding designed for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40)
9902.11.97
Disposable cutlery of plastics, containing by weight over 96 percent of polypropylene, presented without being individually wrapped, grouped, banded or skewered for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40)
9902.11.98
Pans or inserts of plastics, of a type designed for pet crates of metal wire as inserts to create a solid interior surface (provided for in subheading 3924.90.56)
9902.12.01
Boxing and mixed martial arts gloves of plastics (provided for in subheading 3926.20.30)
9902.12.02
Handles of plastics for coolers of heading 9403 (provided for in subheading 3926.30.10)
9902.12.03
Belting, for machinery, of plastic, containing textile components, in which man-made or vegetable fiber do not predominate by weight over any other textile fiber, of a width exceeding 120 cm, but not more than 171 cm (provided for in subheading 3926.90.59)
9902.12.07
Cut-to-shape pieces or profiles of polyvinyl chloride plastics, the foregoing designed to be attached to the edge of a dust pan tray having contact with the floor or other surface, rigid and flexible in form, each measuring 24.77 cm to 30 cm in length and 1.35 cm to 1.87 cm in width, valued not over $0.09 each (provided for in subheading 3926.90.99)
9902.12.08
Adjustable squeeze-trigger bar clamps of plastics (provided for in subheading 3926.90.99)
9902.12.09
Back-shell style smartphone cases of hard plastics, each incorporating flexible rubber over command buttons and specially fitted rigid plastic clip with adjustable neoprene fabric armband (provided for in subheading 3926.90.99).
9902.12.10
Rectangular plastic block filled with a polymer based freezer gel, designed to attach to reusable food storage containers (provided for in 3926.90.99)
9902.12.11
Accessories of plastics for cameras of subheading 8525.80.40, each incorporating a handheld camera grip, folding extension arms and a tripod screwed into the base of the handle the foregoing measuring between 50 and 53 cm when fully extended without the tripod, 62 to 65 cm when fully extended with the tripod and 18 to 21 cm when folded and collapsed (provided for in subheading 3926.90.99).
9902.12.12
Mounts of plastics, designed to secure cameras of subheading 8525.80.40 to a person's head; each mount incorporating an adjustable head-strap designed to encircle the forehead, a strap designed to cross the top of the user's head, a plastic mount designed to clip the camera to the head strap, a thumbscrew to allow the mounting of the camera and the adjustment of the viewing direction of the camera on a pivot (provided for in subheading 3926.90.99)
9902.12.13
Accessories of plastics, designed for use with cameras of subheading 8525.80.40; such goods measuring between 14 cm and 17 cm in length, buoyant in water, each incorporating a handle designed to allow a user to grip with the hand, an adjustable hand-strap and an adjustable thumb screw designed to permit mounting of the camera and adjusting the viewing angle of the camera on a pivot (provided for in subheading 3926.90.99).
9902.12.14
Mounts of plastics, engineered to attach to cameras of subheading 8525.80.40; designed to attach to flat surfaces by means of a round suction cup measuring between 8 and 10 cm in diameter; each incorporating x, y and z-directional pivots to adjust the camera's viewpoint (provided for in subheading 3926.90.99).
9902.12.15
Camera mounts of plastics, designed to clamp to tubes measuring 10 to 23 mm, each mount designed to hold two cameras in such positions as to permit the user to take photos with immersive front-facing and rear-facing perspectives (provided for in subheading 3926.90.99)
9902.12.17
Camera mounts of plastics, engineered to operate with cameras of subheading 8525.80.40 and facilitate mounting of cameras onto tubes measuring 3.5 to 6.35 cm in diameter, the foregoing incorporating a base capable of rotating the camera 360 degrees on a plane (provided for in subheading 3926.90.99)
9902.12.18
Mounting frame enclosures of plastics, designed for digital still image video cameras of subheading 8525.80.40, the foregoing incorporating an adhesive circular base of a diameter of 15 cm (provided for in subheading 3926.90.99)
9902.12.20
Replacement doors of plastics, designed for use on waterproof camera housings (provided for in subheading 3926.90.99)
9902.12.21
Replacement side doors of plastics, designed for housings for digital still image video cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99)
9902.12.22
Camera mounts of plastics, designed to attach cameras of subheading 8525.80.40 securely onto tubes measuring 9 to 35 mm in diameter, each incorporating a base capable of rotating the camera 360 degrees on a plane (provided for in subheading 3926.90.99)
9902.12.23
Camera mounts of plastics, designed to hold cameras of subheading 8525.80.40, each mount measuring 4 and 10 cm in length, 3 to 5 cm in width and less than 2 cm in height, incorporating adhesive pads to attach the mount to flat surfaces (provided for in subheading 3926.90.99)
9902.12.24
Camera mounts each designed to clip a camera of subheading 8525.80.40 to a surfboard, such mounts of plastics, designed to be inserted into a cross-sectional hole drilled into the surfboard and held thereto by screws (provided for in 3926.90.99)
9902.12.26
Camera mounts of plastics, each with an elongated, segmented plastic neck composed of 6 to 8 ball joints, incorporating a base that clips into other types of mounts but not incorporating a clamp, engineered to mount cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99).
9902.12.27
Sets each containing five camera mounts of plastics, designed for cameras of subheading 8525.80.40; such sets each containing mounts having various different profile configurations including but not limited to rectangular, curved or raised profiles (provided for in subheading 3926.90.99)
9902.12.28
Camera mounts of plastics, designed for mounting cameras of subheading 8525.80.40 to musical instruments or microphone stands; each incorporating a spring-loaded clamp and a folding extension arm (provided for in subheading 3926.90.99)
9902.12.42
Backpacks of man-made fibers, each containing a padded compartment designed for a laptop or tablet, with hard molded plastic shell in the shape of a shield on one outer surface (provided for in subheading 4202.92.31)
9902.12.43
Backpacks of man-made fibers, each containing a padded compartment designed for a laptop or tablet, with hard molded plastic shell in the shape of one or more animals or animal parts on one outer surface (provided for in subheading 4202.92.31)
9902.12.44
Backpacks of man-made fibers, each containing a padded compartment designed for a laptop ortablet, with hard molded plastic shell in a shape other than a shield or animals or animal parts on one outer surface (provided for in subheading 4202.92.31)
9902.12.46
Binocular carrying cases with outer surface of camouflage-printed woven fabric of man-made fibers coated with plastics, each with a padded interior and both a zipper and magnetic closures, designed to be carried on the front side of the body and supported by shoulder straps stabilized with a back harness, weighing no more than 382.544 g, valued $20 or more (provided for in subheading 4202.92.91)
9902.12.48
Drawstring bags with outer surface of sheeting of plastic or of textile materials, such bags of nylon, presented packaged in sets of 5 bags per set and labeled for retail sale, each bag with capacity of less than 1 liter in volume (provided for in subheading 4202.92.91)
9902.12.49
Cases or containers with outer surface of sheeting of plastics or of man-made fibers, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container or retail packaging indicating its intention to be used for, electronic games of heading 9504 or accessories thereof (provided for in subheadings 4202.92.91 and 4202.92.97)
9902.12.50
Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading 4202.99.90)
9902.12.51
Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.12.52
Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).
9902.12.53
Cases or containers of injection-molded acrylonitrile-butadiene-styrene (ABS), polypropylene (PP) or polycarbonate (PC) plastics, the foregoing specially shaped or fitted for, and with labeling, logo or other descriptive information on the exterior of the case or container, its zipper pull or its retail packaging indicating such cases are designed for use as holders for electronic games of subheading 9504 or accessories thereof (provided for in subheading 4202.99.90)
9902.12.54
Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90)
9902.12.55
Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90).
9902.12.56
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).
9902.12.63
Men's full-fingered gloves with a palm side of leather and a backside of woven fabric comprising 89 percent or more but not over 95 percent by weight of man-made fibers and 5 percent or more but not over 11 percent by weight of elastomeric fibers, such fabric coated with plastics; such gloves stuffed with synthetic microfiber for thermal insulation, with elasticized wrist and valued at $18 or more per pair; the foregoing other than gloves specially designed for use in sports (provided for in subheading 4203.29.30)
9902.13.54
Hand muffs of knitted fabrics of polyester coated with plastics, such muffs stuffed with synthetic microfiber for thermal insulation, each with side openings having elastic closures, with one exterior pocket with zipper closure and weighing not more than 453.592 g (provided for in subheading 6117.80.95)
9902.13.84
Smartphone cases, each attached to integral adjustable armbands wholly of textile materials, with such case of polyester-laminated neoprene, incorporating a clear plastic window for visual access to the smartphone screen and a small opening for headphone wires, whether or not with decorative plastic overlay (provided for in subheading 6307.90.98)
9902.13.87
Chest harnesses of textile materials, each designed for attaching cameras of subheading 8525.80.40 to a user's chest; incorporating a waist belt and shoulder straps, each with a plastic connector and thumb screw designed for camera mounting or adjustment (provided for in subheading 6307.90.98)
9902.13.88
Adjustable straps of textile materials, designed with small plastic mounts intended to secure cameras of subheading 8525.80.40 to helmets or to other articles (provided for in subheading 6307.90.98)
9902.13.89
Textile bags of woven fabric of polyester and coated with thermoplastic polyurethane, each pleated and attached to a ring of plastics and/or metal with internal threads, with a washer and a plastic cap with external threads that screws into the ring to form an expandable circular shaped bag, designed to hold ice and/or cold water (provided for in subheading 6307.90.98)
9902.13.92
Sports footwear, with outer soles and uppers of rubber or plastics, valued over $12/pair, for men (provided for in subheading 6402.19.90)
9902.13.93
Sports footwear, with outer soles and uppers of rubber or plastics, valued over $12/pair, other than for men (provided for in subheading 6402.19.90)
9902.13.94
Men's work footwear with outer soles and uppers of rubber or plastics, covering the ankle and having an oil-resistant and slip-resistant outer sole (provided for in subheading 6402.91.40)
9902.13.96
Protective active footwear for women, with outer soles and uppers of rubber or plastics (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper and except footwear with insulation that provides protection against cold weather) whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm (provided for in subheading 6402.91.42), such footwear, if valued at $26/pr or higher, without openings in the sole or upper designed to vent moisture
9902.13.97
Protective active footwear for women, with outer soles and uppers of rubber or plastics (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper ,and except footwear with insulation that provides protection against cold weather), whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm, covering the ankle, valued over $26/pr; where such protection is imparted by the use of a laminated textile fabric, such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6402.91.42)
9902.13.98
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated, but not coated, textile fabric; such footwear, if valued over $27, without openings in the bottom and/or side of the sole or covered opening in the upper designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)
9902.13.99
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper; and except footwear designed to be protective that is incomplete in its condition as imported), valued over $27/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated, but not coated, textile fabric; such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)
9902.14.01
Footwear for men with outer soles and uppers of rubber or plastics, such uppers of neoprene measuring 7 mm in thickness, injected with polyurethane on the exterior and covered with knitted fabric wholly of polyester on the interior, with rubber lug bottoms laminated with cement to the upper; such footwear covering the ankle, whose height does not exceed 35.56 cm; waterproof, valued not over $36/pair and designed to be permanently affixed to fishing waders (provided for in subheading 6402.91.50)
9902.14.02
Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated, but not laminated, textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.91.50)
9902.14.03
Men's footwear with outer soles and uppers of rubber or plastics, with foxing or foxing-like band, covering the ankle, closed toe or heel, valued over $3 but not over $6.50 per pair, the foregoing other than sports footwear and protective, waterproof or slip-on type footwear (provided for in subheading 6402.91.70)
9902.14.04
Men's footwear with outer soles and uppers of rubber or plastics (other than sports footwear), with foxing or foxing like band, covering the ankle, closed toe or heel, valued over $6.50 but not over $12.00 per pair, not of the protective, waterproof or slip-on type (provided for in subheading 6402.91.80)
9902.14.05
Footwear with outer soles and uppers of rubber or plastics, having uppers of which over 90 percent of the external surface area is rubber or plastics, made on a base or platform of wood (provided for in subheading 6402.99.23)
9902.14.06
Footwear with outer soles and uppers of rubber or plastics, not covering the ankle, having uppers of which over 90 percent of the external surface area is rubber or plastics, other than tennis shoes, basketball shoes, gym shoes, training shoes and the like, such footwear for women (and other than work footwear), valued $15/pair or higher (provided for in subheading 6402.99.31)
9902.14.07
Work footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle (provided for in subheading 6402.99.31), the foregoing other than house slippers and other than tennis shoes, basketball shoes, gym shoes, training shoes and the like
9902.14.08
Work footwear for men, with outer soles and uppers of rubber or plastics, not covering the ankle (provided for in subheading 6402.99.31), the foregoing other than house slippers and other than tennis shoes, basketball shoes, gym shoes, training shoes and the like
9902.14.10
Women’s footwear with outer soles of rubber or plastics measuring not over 14 mm in thickness and with uppers of plastics, such footwear designed for use in cheerleading activities, valued over $15/pair and weighing no more than 0.5 kg/pair (provided for in subheading 6402.99.31)
9902.14.11
Protective active footwear for men, with outer soles and uppers of rubber or plastics, not covering the ankle, valued over $24/pair (provided for in subheading 6402.99.32)
9902.14.12
Protective active footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle, valued over $24/pair (provided for in subheading 6402.99.32); the foregoing footwear, if valued over $26/pair, other than footwear which provides protection against water that is imparted by the use of a laminated textile fabric and with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture
9902.14.13
Protective active footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle, which provides protection against water that is imparted by the use of a laminated textile fabric and with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture; the forgoing footwear valued over $26/pair (provided for in subheading 6402.99.32)
9902.14.14
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6402.99.33)
9902.14.15
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $27/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)
9902.14.16
Footwear for other persons, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), not covering the ankle or having a protective metal-toe cap, valued over $18/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.99.33)
9902.14.17
Footwear for women, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded bottoms or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported); the foregoing not covering the ankle or having a protective metal-toe cap, valued over $25/pair, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.99.33)
9902.14.18
Women’s footwear with outer soles and uppers of rubber or plastics, each sole measuring not over 12 mm in thickness, the foregoing footwear designed for use in cheerleading activities, valued over $19/pair and weighing not over 0.5 kg/pair (provided for in subheading 6402.99.90)
9902.14.19
Golf shoes for men, youths and boys, with outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers), not welt, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather, where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading 6403.19.30)
9902.14.20
Footwear for women, with outer soles of rubber or plastics and uppers of leather, made on a base or platform of wood (provided for in subheading 6403.99.20)
9902.14.21
Work footwear for men, with outer soles of rubber or plastics and uppers of leather, not covering the ankle, incorporating a protective toe cap of materials other than metal (provided for in subheading 6403.99.60)
9902.14.22
House slippers with outer soles of rubber or plastics and uppers of leather, for men, youths and boys (provided for in subheading 6403.99.60)
9902.14.23
Footwear for men, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (the foregoing other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than slip-on footwear); such footwear not covering the ankle, valued $29/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.60)
9902.14.24
Footwear for men, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics; the foregoing other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than slip-on footwear; such footwear not covering the ankle, valued $27/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6403.99.60)
9902.14.25
Work footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of leather, the foregoing not covering the ankle, incorporating a protective toe cap of materials other than metal, valued over $2.50 per pair (provided for in subheading 6403.99.90)
9902.14.26
Footwear for other persons, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear), not covering the ankle, valued $20/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit or a combination thereof, designed to vent moisture; the foregoing, if for women, other than such footwear valued over $29/pair (provided for in subheading 6403.99.90)
9902.14.27
Footwear for women, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear); such footwear not covering the ankle, valued $29/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.28
House slippers with outer soles of rubber or plastics and uppers of leather, valued over $2.50/pair, for women (provided for in subheading 6403.99.90)
9902.14.29
Footwear for women, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear); such footwear not covering the ankle, valued $27/pair or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric); the foregoing, if valued $29/pair or higher, other than footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.30
Footwear for other persons, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear), not covering the ankle, valued $18/pair or higher; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric; the foregoing other than footwear for women either (i) valued over $27 per pair, or (ii) if valued over $20/pair, having openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6403.99.90)
9902.14.31
Women’s footwear with uppers of leather and outer soles of rubber or plastics, such soles measuring not over 9 mm in thickness, the foregoing designed for use in cheerleading activities, valued over $19/pair and weighing no more than 0.5 kg/pair (provided for in subheading 6403.99.90)
9902.14.32
Women's sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like, with outer soles of rubber or plastics and uppers textile materials, such uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements such as those mentioned in note 4(a) to ch. 64) is leather (provided for in subheading 6404.11.20)
9902.14.33
Footwear other than for men or women, with uppers of textile materials and outer soles of rubber or plastics, of an athletic type, exclusively of adhesive construction, without a foxing or foxing-like band; such footwear valued over $3 but not over $6.50 per pair (provided for in subheading 6404.11.69)
9902.14.34
Ski boots, cross country ski footwear or snowboard boots, constructed with a forward-leaning upper or designed to attach securely to skis or a snowboard by means of bindings, the foregoing valued over $12/pair, with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials (provided for in subheading 6404.11.90)
9902.14.35
Sports footwear for women, with outer soles of rubber or plastics and uppers of textile materials, valued over $20/pair, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.11.90)
9902.14.36
Sports footwear for men, with outer soles of rubber or plastics and uppers of textile materials, valued over $20/pair, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.11.90)
9902.14.38
Footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, work footwear and footwear designed to be protective that is incomplete in its condition as imported); such footwear valued over $25/pair, not covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading 6404.19.20)
9902.14.39
Footwear for women, with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, work footwear, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $27/pair, not covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6404.19.20)
9902.14.42
Footwear with outer soles of rubber or plastics, with uppers of textile material other than vegetable fibers and having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional note U.S. note 5 to chapter 64, with open toes or open heels or of the slip-on type, weighing 10 percent or more of rubber or plastics, valued $15/pair or higher; the foregoing for women (other than house slippers) (provided for in subheading 6404.19.37)
9902.14.43
Footwear with outer soles of rubber or plastics, with uppers of textile material other than vegetable fibers and having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional note U.S. note 5 to chapter 64, with open toes or open heels or of the slip-on type, weighing 10 percent or more of rubber or plastics, valued at $10 or more but not over $14.99/pair; the foregoing for women (other than house slippers) (provided for in subheading 6404.19.37)
9902.14.44
Footwear (other than footwear for men) with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, with open toes or open heels, having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin and having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.37)
9902.14.45
Footwear for women, with open toes or open heels, containing 10 percent or more by weight of rubber or plastics, with uppers of textile materials and having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing with outer soles of rubber or plastics and not having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.39)
9902.14.46
Footwear (other than for women) with open toes or open heels, containing 10 percent or more by weight of rubber or plastics, with uppers of textile materials and having uppers in which at least 30 percent of the external surface area (including any sheepskin accessories or reinforcements such as those mentioned in note 4(a) to chapter 64) is sheepskin; the foregoing with outer soles of rubber or plastics and not having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.39)
9902.14.47
Footwear with uppers of vegetable fibers (other than such footwear for men or women), whether with outer soles of rubber or plastics (provided for in subheading 6404.11.41, 6404.11.51, 6404.11.61, 6404.11.71, 6404.11.81, 6404.19.36, 6404.19.42, 6404.19.52, 6404.19.72 or 6404.19.82) or with outer soles of materials other than leather or composition leather (provided for in subheading 6405.20.30)
9902.14.48
House slippers with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, valued over $6.50 but not over $12/pair, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading 6404.19.87)
9902.14.49
Footwear for men, valued over $24/pair, covering the ankle but not covering the knee, with outer soles of rubber or plastics and uppers of textile materials (provided for in subheading 6404.19.90)
9902.14.50
Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $12/pair, incorporating a protective toe cap of materials other than metal (provided for in subheading 6404.19.90)
9902.14.51
Footwear for women with outer soles of leather or composition leather and uppers of textile materials, not elsewhere specified or included, valued not over $20.00 per pair, the foregoing other than footwear containing less than 10 percent by weight of rubber or plastics and other than containing 50 percent or less by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics (provided for in subheading 6404.20.60)
9902.14.52
Footwear for women, with outer soles of leather or composition leather and uppers of textile materials, not elsewhere specified or included, valued over $20.00 per pair; the foregoing other than footwear containing less than 10 percent by weight of rubber or plastics and other than containing 50 percent or less by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics (provided for in subheading 6404.20.60)
9902.14.57
Removable insoles of rubber or plastics, the foregoing designed to provide foot support (provided for in subheading 6406.90.30)
9902.14.67
Foliage and flowers of plastics, representing desert or underwater plants and not exceeding 45.72 cm in height, each assembled by gluing and inserted into a base or suction cup, the foregoing presented put up for retail sale as goods designed for a household terrarium or aquarium (provided for in subheading 6702.10.20)
9902.14.68
Foliage and flowers of plastics, representing desert or underwater plants, each inserted directly into a base or suction cup, measuring not over 20.32 cm in height, not assembled by gluing or similar means or by binding with flexible materials such as wire, paper, textile materials or foil; the foregoing presented put up for retail sale as goods designed for a household terrarium or aquarium (provided for in subheading 6702.10.40)
9902.15.01
Wire cages of iron or steel, each with attached tray of plastics or of steel, such cages with one or two hinged doors for access to inside of cage, the foregoing designed for small pets other than dogs and for use in the home (provided for in subheading 7323.99.90)
9902.15.10
Zinc die-cast interior punches, each with a plastic exterior casing (provided for in subheading 7907.00.60)
9902.15.20
Hand tools designed for attaching tags to garments with plastic fasteners, each comprising a steel feed mechanism housed in a plastic body and a replaceable hollow needle through which the fastener is fed, then inserted through the garment material (provided for in subheading 8205.59.55)
9902.15.53
Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)
9902.15.56
Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)
9902.15.74
Table saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, each with blade measuring 25.4 cm (provided for in subheading 8465.91.00), such saws excluding (i) tilting arbor table saws, non-laser guided, each with a 25.4 cm blade and of a weight not exceeding 220 kg, and (ii) laser-guided tilting arbor table saws, each with 25.4 cm blade and detachable base with casters, weighing less than 31 kg
9902.15.75
Benchtop band saws, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, the foregoing with a cutting depth between 25 and 36 cm, valued under $1,000 each (provided for in subheading 8465.91.00)
9902.15.79
Miter sawing machines, power operated, not numerically controlled, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, with 25.4 cm blade, capable of adjusting bevel of cut, without laser guides (provided for in subheading 8465.91.00)
9902.15.83
Electromechanical "hide and seek" toys, designed for use by cats or dogs, each with an electrically powered fast-moving feather wand that changes direction randomly; such wand mechanism positioned in a round enclosure of plastics, designed to allow the wand to shoot out; such toys each containing a carpeted scratching area on top (provided for in subheading 8479.89.94)
9902.15.84
Electromechanical pet toys, each with a plastic butterfly attached to a wire cable that revolves around a plastic base when in use, such toy designed to simulate the flying motion of a butterfly (provided for in subheading 8479.89.94)
9902.15.87
Electromechanical cat toys, each depicting a bird in a cage, such toy bird of textile materials with magnet inside its body and suspended by a string from the top of a cage comprising plastic ribs; such cage sitting on a base of plastics that contains the electrical components; with cage base having a magnetic coil designed to switch polarity and cause the bird to be in a state of continuous motion (provided for in subheading 8479.89.94)
9902.15.88
Electromechanical cat toys, with electrical function supplying power to the moving parts and supporting the mechanical function, each unit comprising an electrical/mechanical "mouse" of plastics enclosed in an approximately 0.61 m diameter textile fabric "pouch," with such "mouse" designed to randomly move around the inside of the pouch (provided for in subheading 8479.89.94)
9902.16.09
AC electric motors of an output exceeding 37.5w but not exceeding 72w, single phase, each equipped with a capacitor, a speed control mechanism, and a motor mount of plastics and a self-contained gear mechanism for oscillation (provided for in subheading 8501.40.20).
9902.16.25
Electromechanical cylindrical coffee grinders, each operated by pushing the plastic cover into the base, the foregoing having a removable stainless steel bowl with a capacity of more than 0.1 liter and not exceeding 0.2 liter (provided for in subheading 8509.40.00).
9902.16.47
Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and with a door having an exterior molded plastic handle (provided for in subheading 8516.50.00)
9902.16.62
Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using coffee capsules, each having a loading lever containing both stainless steel and plastic (provided for in subheading 8516.71.00)
9902.16.65
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each with electronic clock and self-contained coffee holding chamber, the foregoing designed to be used without separate carafe (provided for in subheading 8516.71.00); the foregoing excluding coffee makers (i) designed for permanent installation in a wall, cabinet or shelf, (ii) with removable tank with a handle or (iii) with loading lever containing both stainless steel and plastics
9902.16.82
Handheld electrothermic garment steamers of a kind used for domestic purposes, each with body of plastics, with output rated less than 1000 W, with retractable cord and weighing not more than 1 kg, whether or not packaged with a storage bag (provided for in subheading 8516.79.00)
9902.16.83
Vacuum insulated coffee carafes, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters and plastic brew-through lid for direct brewing (provided for in subheading 8516.90.90)
9902.16.84
Vacuum insulated thermal pitchers, each with stainless steel interior and exterior, with a capacity exceeding 1 liter but not exceeding 2 liters, measuring 27.94 cm or more but not over 30.48 cm in height, with plastic brew-through lid for direct brewing and plastic spout and handle for pouring (provided for in subheading 8516.90.90)
9902.17.86
Adjustable-weight fitness dumbbells, each ranging from 2 kg to not more than 30 kg, having the capability for wireless exchange of data, incorporating a rotating single handle grip that interlocks disks with weight plates supported by a fitted plastic base, whether or not presented packaged with units that are not capable of wireless exchange of data (provided for in subheading 9506.91.00).
9902.17.87
Adjustable-weight fitness dumbbells without Bluetooth capability, each ranging from 2 kg to not more than 30 kg, certified by the importer as incorporating a rotating single handle grip that interlocks disks with weight plates, supported by a fitted plastic base (provided for in subheading 9506.91.00)
9902.17.89
Adjustable-weight fitness dumbbells, each allowing the user to choose a weight from a range of either 2 kg or more but not over 26 kg or 4 kg or more but not over 46 kg, certified by the importer as incorporating rotating end dials that interlock disks with weight plates supported by a fitted plastic base (provided for in subheading 9506.91.00)
9902.17.91
Athletic mouth guards of plastics (provided for in subheading 9506.99.60)
9902.17.95
Hair-slides, set with imitation pearls or imitation gem stones and not of hard rubber or plastics (provided for in subheading 9615.19.60)
9902.17.96
Hair-slides, the foregoing not set with imitation pearls or imitation gem stones, not of hard rubber or plastics (provided for in subheading 9615.19.60)
9902.18.01
Vacuum coffee servers, each with lining of glass, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)
9902.18.02
Vacuum coffee servers, each with lining of stainless steel, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)
9902.18.03
Tripods of plastics designed for use with digital still image video cameras of subheading 8525.80.40, the foregoing measuring 12 cm or more but not over 20 cm in length (provided for in subheading 9620.00.50)
9903.08.07
Handbags, whether or not with shoulder strap, including those without handle, with outer surface of sheeting of plastic (provided for in subheading 4202.22.15)
9903.08.08
Articles of a kind normally carried in the pocket or in the handbag, with outer surface of sheeting of plastic, of reinforced or laminated plastics (provided for in subheading 4202.32.10)
9903.27.08
Other footwear with outer soles of rubber, plastics or composition leather and uppers of leather (provided for in subheading 6403.99.60, 6403.99.75 or 6403.99.90)
9903.27.09
Other footwear with outer soles of rubber or plastics and uppers of textile materials, with open toes or open heels, or of the slip-on type (provided for in subheading 6404.19.35)
9903.41.10
Footwear with outer soles of leather and uppers wholly or in part of leather, and footwear with outer soles of rubber or plastics and uppers having an exterior surface area predominantly of leather, the foregoing provided for in chapter 64, except (a) slip-on footwear of a type not suitable for outdoor use, without backs or backstraps, having outer soles with a thickness of less than 5 mm and with less than 20 mm difference between the thickness of the bottom at the ball of the foot and at the heel, and (b) footwear which is designed for a sporting activity and has, or has provision for, attached spikes, sprigs, stops, clips, bars or the like, and skating boots, ski-boots and cross-country ski footwear, wrestling boots, boxing boots and cycling shoes
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
2905Acyclic alcohols and their halogenated, sulfonated, nitrated or nitrosated derivatives:
Saturated monohydric alcohols:
2905.11Methanol (Methyl alcohol):
2905.11.10 00 Imported only for use in producing synthetic natural gas (SNG) or for direct use as a fuel
liters
Free4.8¢/liter
2905.11.20Other
liters
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)46%
10 Imported for use in chemical production, including production of aldehydes, plastics, olefins and resins
liters
15 For use in wastewater treatment
liters
85 Other
liters
2905.12.00Propan-1-ol (Propyl alcohol) and propan-2-ol (Isopropyl alcohol)5.5%Free (A*,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)66%
10 Propan-1-ol
kg
50 Propan-2-ol
kg
2905.13.00 00 Butan-1-ol (n-Butyl alcohol)
kg
5.5%Free (A*,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)50.5%
2905.14Other butanols:
2905.14.10 00 tert-Butyl alcohol, having a purity of less than 99 percent by weight
kg
Free50.5%
2905.14.50Other5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)50.5%
10 2-Methylpropan-1-ol (Isobutyl alcohol)
kg
50 Other
kg
2905.16.00Octanol (Octyl alcohol) and isomers thereof3.7%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)25%
10 2-Ethylhexan-1-ol
kg
50 Other
kg
2905.17.00 00 Dodecan-1-ol (Lauryl alcohol), hexadecan-1-ol (Cetyl alcohol) and octadecan-1-ol (Stearyl alcohol)
kg
5%Free (A+,AU,BH, CA,CL,CO,D, E,IL,JO, KR,MA, MX,OM,P, PA,PE,S,SG)25%
2905.19Other:
2905.19.10 00 Pentanol (Amyl alcohol) and isomers thereof
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)37.5%
2905.19.90Other3.7% Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)25%
05 3,3-Dimethylbutan-2-ol (pinacolyl alcohol)
kg
10 Decyl alcohol and isomers thereof
kg
20 Hexyl alcohol and isomers thereof
kg
90 Other
kg
Unsaturated monohydric alcohols:
2905.22Acyclic terpene alcohols:
2905.22.10 00 Geraniol
kg
3%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)45%
2905.22.20 00 Isophytol
kg
3.7%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)25%
2905.22.50Other4.8% Free (A*,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)45%
10 Citronellol
kg
50 Other
kg
2905.29Other:
2905.29.10 00 Allyl alcohol
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)45%
2905.29.90 00 Other
kg
3.7% Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)25%
Diols:
2905.31.00 00 Ethylene glycol (Ethanediol)
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)63%
2905.32.00 00 Propylene glycol (Propane-1,2-diol)
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)51%
2905.39Other:
2905.39.10 00 Butylene glycol
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)51%
2905.39.20 00 Neopentyl glycol
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)54.5%
2905.39.60 00 Hexylene glycol
kg
Free54.5%
2905.39.90 00 Other
kg
5.5% Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)54.5%
Other polyhydric alcohols:
2905.41.00 00 2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (Trimethylolpropane)
kg
3.7%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)25%
2905.42.00 00 Pentaerythritol
kg
3.7%Free (A*,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)25%
2905.43.00 00 Mannitol
kg
4.6%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)50%
2905.44.00 00 D-Glucitol (Sorbitol)
kg
4.9%Free (A*,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)50%
2905.45.00 00 Glycerol
kg
0.5¢/kgFree (A*,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)4.4¢/kg
2905.49Other:
2905.49.10 00 Triols and tetrols
kg
3.7%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)25%
2905.49.20 00 Esters of glycerol formed with acids of heading 2904
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)54.5%
Other:
Polyhydric alcohols derived from sugars:
2905.49.30 00 Xylitol
kg
Free50%
2905.49.40 00 Other
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,KR,MA,MX,OM,P,PA,PE,S,SG)50%
2905.49.50 01 Other
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)54.5%
Halogenated, sulfonated, nitrated or nitrosated derivatives of acyclic alcohols:
2905.51.00 00 Ethchlorvynol (INN)
kg
Free39%
2905.59Other:
2905.59.10 00 Derivatives of monohydric alcohols
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)39%
2905.59.30 00 Dibromoneopentylglycol
kg
Free54.5%
2905.59.90 00 Other
kg
5.5%Free (A,AU,BH,CA,CL,CO,D,E,IL,JO,K,KR,MA,MX,OM,P,PA,PE,S,SG)54.5%