In aluminum containers

In aluminum containers

In aluminum containers

In aluminum containers

In aluminum containers

In aluminum containers

Natural calcium phosphates, natural aluminum calcium phosphates and phosphatic chalk:

Portland cement, aluminous cement, slag cement, supersulfate cement and similar hydraulic cements, whether or not colored or in the form of clinkers:

Containing mainly aluminum

Artificial corundum, whether or not chemically defined; aluminum oxide; aluminum hydroxide:

White, pink or ruby, containing more than 97.5 percent by weight of aluminum oxide

Of aluminum

Of aluminum

Of aluminum

Of aluminum

Other salts of inorganic acids or peroxoacids (including aluminosilicates whether or not chemically defined), other than azides:

Double or complex silicates, including aluminosilicates whether or not chemically defined

Metallic aluminum pigments

Containing by weight more than 50 percent of alumina (Al₂O₃), of silica (SiO₂) or of a mixture or compound of these products:

Containing by weight more than 50 percent of alumina (Al₂O₃) or of a mixture or compound of alumina and of silica (SiO₂)

Ceramic ferrules of porcelain or china, not exceeding 3 mm in diameter or 25 mm in length, having a fiber channel opening and/or ceramic mating sleeves of alumina or zirconia

Ceramic ferrules of alumina or zirconia, not exceeding 3 mm in diameter or 25 mm in length, having a fiber channel opening and/or ceramic mating sleeves of alumina or zirconia

Kitchenware, non-glazed, greater than 75 percent by volume crystalline, of lithium aluminosilicate, having a linear coefficient of expansion not exceeding 10 x 10^-7 per Kelvin within a temperature range of 0˚C to 300˚C, transparent, haze-free, exhibiting transmittances of infrared radiations in excess of 75 percent at a wavelength of 2.5 microns when measured on a sample 3 mm in thickness, and containing β-quartz solid solution as the predominant crystal phase

Plated or coated with aluminum-zinc alloys

Unwrought aluminum:

Of greater than 99.8 percent aluminum

Other, containing 0.03 percent or more by weight of lead (secondary aluminum)

Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips

Other recyclable aluminum

Of aluminum, not alloyed:

Of aluminum, not alloyed:

Of aluminum alloys:

Of aluminum, not alloyed:

Of aluminum alloys:

Boxed aluminum foil weighing not more than 11.3 kg

Of aluminum, not alloyed

Of aluminum alloys

Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:

Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:

Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:

Other articles of aluminum:

Cloth, grill, netting and fencing, of aluminum wire

Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material

Of aluminum

Of aluminum

Of iron or steel, of aluminum or of zinc

Of iron or steel, of aluminum or of zinc

Of iron or steel, of aluminum or of zinc

Of iron or steel, of aluminum or of zinc

Brazed aluminum plate-fin heat exchangers

Machinery containing brazed aluminum plate-fin heat exchangers

Of aluminum

Of aluminum

Trigger and twist grip controls for three speed hubs, and parts thereof; bicycle handlebar stems wholly of aluminum alloy (including their hardware of any material), valued over $2.15 each; and bicycle handlebar stem rotor assemblies

Of aluminum

Lampposts and bases for lampposts, of aluminum

Of aluminum

Lithium tetrahydridoaluminate(1-) (Lithium aluminum hydride) (CAS No. 16853-85-3) (provided for in subheading 2850.00.50)

Barium magnesium aluminate phosphor doped by europium, of a kind used as a luminophore (CAS Nos. 102110-17-8,1304-28-5,1309-48-4, 1344-28-1,1308-96-9, and 63774-55-0) (provided for in subheading 3206.50.00)

Barium magnesium aluminate phosphor doped by europium and manganese, of a kind used as a luminophore (CAS Nos. 102110-17-8 ,1344-43-0, 1304-28-5, 1309-48-4, 1344-28-1, 1308-96-9, and 63774-55-0) (provided for in subheading 3206.50.00)

Fritted barium borosilicate glass with a mean particle size between 0.4 and 10 microns, Young's modulus of 71GPa, a density of 2.8 grams per cubic centimeter, radiopacity of 4.2, a refractive index of 1.53, and chemical composition of 55 percent silicon dioxide, 25 percent barium oxide, 10 percent boron trioxide and 10 percent aluminum oxide by weight (provided for in subheading 3207.40.10)

Magnesium aluminum hydroxide carbonate (synthetic hydrotalcite) (CAS No. 11097-59-9) (provided for in subheading 2842.90.90); and magnesium aluminum hydroxide carbonate (synthetic hydrotalcite) (CAS No. 11097-59-9) coated with stearic acid (CAS No. 57-11-4) (provided for in subheading 3812.39.90)

Acid washed beta zeolite powder composed of mixtures of aluminum, silicon and sodium oxides, tetraethylammonium-hydroxide, and organic compounds (CAS No. 1318-02-1) (provided for in subheading 3824.99.92)

Cases of clear polycarbonate plastics, designed for use with cameras of subheading 8525.80.40 to affix camera to the user's wrist; such housings waterproof at a depth up to 60 m, each incorporating buttons for operation of the camera, a silicon gasket designed for waterproofing, a flat and optically-coated glass lens, an aluminum heat sink and adjustable neoprene/hook and loop closures on its wrist straps (provided for in subheading 4202.99.90).

Umbrella frames, not presented with bases, the foregoing with aluminum center support poles of a length greater than 2.133 m, whether or not including a tilt function (provided for in subheading 6603.20.90)

Polycrystalline fibers containing by weight over 70 percent of alumina and less than 30 percent of silica, the foregoing containing no alkaline oxides or boric oxide, presented in bulk (provided for in subheading 6806.10.00)

Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and not over 3 percent of acrylic latex organic binder, of a basis weight greater than or equal to 1745 g/m2, measuring 10.0 mm or more in thickness; the foregoing presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).

Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and not over 3 percent by weight of acrylic latex organic binder, of a basis weight less than 1745 g/m2, measuring 5.0 mm or more but not over 9.9 mm in thickness; presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).

Catalytic converter needled blanket mats of ceramic fibers containing over 65 percent by weight of aluminum oxide, containing an acrylic latex organic binder of greater than 3 percent and less than 7 percent by weight, of a basis weight less than 1745 g/m2, measuring at least 5.0 mm or no more than 9.9 mm in thickness, in bulk, sheets or rolls, designed for motor vehicles of heading 8703 (provided for in subheading 6806.10.00).

Catalytic converter needled blanket mats of ceramic fibers, containing over 65 percent by weight of aluminum oxide and 3 percent or more but less than 7 percent by weight of acrylic latex organic binder, measuring 10.0 mm or more in thickness, of a basis weight greater than or equal to 1745 g/m2; presented in bulk, sheets or rolls, designed for use in motor vehicles of heading 8703 (provided for in subheading 6806.10.00).

Machined loupe mountings of cast aluminum, with polytetrafluoroethylene coating (provided for in subheading 7616.99.51)

Pistons suitable for use solely or principally with marine propulsion engines, such pistons each having a cast steel crown and aluminum body, weighing 12 kg or more (provided for in subheading 8409.99.92)

Pressure distillation columns, designed to liquefy air and its component gases, the foregoing containing brazed aluminum plate-fin heat exchangers (provided for in subheading 8419.60.10)

Electrothermic steam irons of a kind used for domestic purposes, each with a ceramic-coated cast aluminum sole plate (provided for in subheading 8516.40.40), the foregoing not capable of operating without power connected to mains

Other unwrought aluminum alloys (provided for in subheading 7601.20.90)

Except for products described in heading 9903.85.03 or heading 9903.85.21, 9903.85.25, subheadings 9903.85.27 through 9903.85.44 and subheadings 9903.85.50 through 9903.85.66, products of aluminum provided for in the tariff headings or subheadings enumerated in note 19 to this subchapter, except products of Argentina, of Australia, of Canada, of Mexico; of member countries of the European Union specified in subdivision (a)(v) of such U.S. note 19, under any limitations that may be established by the Department of Commerce under such U.S. note 19; or any exclusions that may be determined and announced by the Department of Commerce

Derivative aluminum products enumerated in U.S. note 19(a)(iii) to this subchapter, except products of Argentina, of Australia, of Canada, of Mexico, of member countries of the European Union (as enumerated in U.S. note 19(a)(v) to this subchapter or of the United Kingdom any exclusions that may be determined and announced by the Department of Commerce

Unwrought aluminum, provided for in heading 7601

Wrought aluminum, provided for in headings 7604, 7605, 7606, 7607, 7608, 7609 and castings and forgings of aluminum provided for in subheading 7616.99.51

Goods granted relief from the application of quantitative limitation otherwise imposed in relation to subheadings 9903.85.05 and 9903.85.06, for any aluminum article determined by the Secretary not to be produced in the United States in a sufficient and reasonably available amount, or of a satisfactory quality, or for specific national security reasons, provided that such goods shall be counted toward any quantitative limitation proclaimed by the President until such limitation has filled

Unwrought aluminum, not alloyed (provided for in subheading 7601.10.30 or 7601.10.60)

Bars, rods and profiles of aluminum, not alloyed (provided for in subheading 7604.10.10, 7604.10.30 or 7604.10.50)

Hollow profiles of aluminum alloys (provided for in subheading 7604.21.00)

Wire of aluminum, of which the maximum cross-sectional dimension exceeds 7 mm (provided for in subheading 7605.11.00 or 7605.21.00)

Other wire of aluminum (provided for in subheading 7605.19.00 or 7605.29.00)

Pipes and tubes of aluminum, seamless (described in statistical reporting number 7608.10.0030 or 7608.20.0030)

Pipes and tubes of aluminum, other than seamless (described in statistical reporting number 7608.10.0090 or 7608.20.0090)

Tube or pipe fittings of aluminum (for example, couplings, elbows, sleeves) (described in statistical reporting number 7609.00.0000)

Castings or forgings of aluminum (described in statistical reporting number 7616.99.5160 or 7616.99.5170)

Unwrought aluminum, not alloyed (provided for in subheading 7601.10.30 or 7601.10.60)

Bars, rods and profiles of aluminum, not alloyed (provided for in subheading 7604.10.10, 7604.10.30 or 7604.10.50)

Hollow profiles of aluminum alloys (provided for in subheading 7604.21.00)

Wire of aluminum, of which the maximum cross-sectional dimension exceeds 7 mm (provided for in subheading 7605.11.00 or 7605.21.00)

Other wire of aluminum (provided for in subheading 7605.19.00 or 7605.29.00)

Pipes and tubes of aluminum, seamless (described in statistical reporting number 7608.10.0030 or 7608.20.0030)

Pipes and tubes of aluminum, other than seamless (described in statistical reporting number 7608.10.0090 or 7608.20.0090)

Tube or pipe fittings of aluminum (for example, couplings, elbows, sleeves) (described in statistical reporting number 7609.00.0000)

Castings or forgings of aluminum (described in statistical reporting number 7616.99.5160 or 7616.99.5170

Aluminum articles that are the product of Russia, or where any amount of primary aluminum used in the manufacture of the aluminum articles is smelted in Russia, or where the aluminum articles are cast in Russia, the foregoing under the terms of note 19(a)(vii)(A) to this subchapter and provided for in the tariff headings or subheadings enumerated in note 19(b) to this subchapter, except any exclusions that may be determined and announced by the Department of Commerce

Derivative aluminum articles that are products of Russia, or where any amount of primary aluminum used in the manufacture of the derivative articles is smelted in Russia, or where the derivative aluminum articles are cast in Russia, when such derivative articles are provided for in the headings or subheadings enumerated in note 19(a)(iii) to this chapter, except any exclusions that may be determined and announced by the Department of Commerce

Except for goods provided for in heading 9903.85.67, aluminum articles that are the product of Russia, or where any amount of primary aluminum used in the manufacture of the aluminum articles is smelted in Russia, or where the aluminum articles are cast in Russia, the foregoing under the terms of note 19(a)(vii)(A) to this subchapter and provided for in the tariff headings or subheadings enumerated in note 19(b) to this subchapter, admitted into a U.S. foreign trade zone under "privileged foreign status" as defined in 19 CFR 146.41, prior to 12:01 a.m. eastern standard time on April 10, 2023, except any exclusions that may be determined and announced by the Department of Commerce

Except for goods provided for in heading 9903.85.68, derivative aluminum articles that are products of Russia, or where any amount of primary aluminum used in the manufacture of the derivative aluminum articles is smelted in Russia, or where the derivative aluminum articles are cast in Russia, when such derivative articles are provided for in the headings or subheadings enumerated in note 19(a)(iii) to this chapter, admitted into a U.S. foreign trade zone under "privileged foreign status" as defined in 19 CFR 146.41, prior to 12:01 a.m. eastern standard time on April 10, 2023, except any exclusions that may be determined and announced by the Department of Commerce