HTS CODE | Harmonized Tariff Schedule

Simple Tool for searching Harmonized Tariff Schedule of the United States.

Search Results:696
2618.00.00.00
Granulated slag (slag sand) from the manufacture of iron or steel
2619.00
Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel:
2620
Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds:
6804.21.00.20
Articles consisting of a continuous rim segment of diamond agglomerated with metal, attached to circular plates of steel (whether or not attached to non-steel plates)
6804.21.00.30
Articles consisting of multiple segments of diamond agglomerated with metal, attached to circular plates of steel, without cutting parts (whether or not attached to non-steel plates)
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.21.00.00
Of stainless steel
7204.30.00.00
Waste and scrap of tinned iron or steel
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.21.00.00
Of alloy steel
7206
Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7207
Semifinished products of iron or nonalloy steel:
7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.25.30.00
Of high-strength steel
7208.26.00.30
High-strength steel
7208.27.00.30
High-strength steel
7208.36.00.30
High-strength steel
7208.37.00.30
High-strength steel
7208.38.00.15
High-strength steel
7208.39.00.15
High-strength steel
7208.51.00.45
Of high-strength steel
7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
7209.18.15
Of high-strength steel
7210
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
7210.30.00.30
Of high-strength steel
7210.49.00.30
Of high-strength steel
7211
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
7211.14.00.30
Of high-strength steel
7211.19.15.00
Of high-strength steel
7211.19.45.00
Of high-strength steel
7211.23.15.00
Of high-strength steel
7212
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.20.00
Other, of free-cutting steel
7213.91.30.11
Tire cord-quality steel wire rod as defined in statistical note 4 of this chapter
7213.91.30.15
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
7214
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.30.00
Other, of free-cutting steel
7215
Other bars and rods of iron or nonalloy steel:
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold-finished
7216
Angles, shapes and sections of iron or nonalloy steel:
7217
Wire of iron or nonalloy steel:
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more:
7219.12.00.06
Of high-nickel alloy steel
7219.14.00.65
Of high-nickel alloy steel
7219.21.00.05
Of high-nickel alloy steel
7219.22.00.05
Of high-nickel alloy steel
7219.32.00.05
Of high-nickel alloy steel
7219.32.00.35
Of high-nickel alloy steel
7219.33.00.05
Of high-nickel alloy steel
7219.33.00.35
Of high-nickel alloy steel
7219.34.00.05
Of high-nickel alloy steel
7219.90.00.10
Of high-nickel alloy steel
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm:
7220.20.60.05
Of high-nickel alloy steel
7220.20.70.05
Of high-nickel alloy steel
7220.20.80.00
Razor blade steel
7221.00.00
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7221.00.00.05
Of high-nickel alloy steel
7222
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
7222.11.00.06
Of high-nickel alloy steel
7222.19.00.06
Of high-nickel alloy steel
7222.20.00.06
Of high-nickel alloy steel
7222.30.00.12
Of high-nickel alloy steel
7223.00
Wire of stainless steel:
7224
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00.05
Of high-nickel alloy steel
7224.10.00.45
Of tool steel
7224.90.00.05
Of high-nickel alloy steel
7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more:
7225.30.11
Of tool steel
7225.30.11.10
Of high-speed steel
7225.30.30.05
Of high-nickel alloy steel
7225.30.51
Of tool steel
7225.30.51.10
Of high-speed steel
7225.40.11
Of tool steel
7225.40.11.10
Of high-speed steel
7225.40.30.05
Of high-nickel alloy steel
7225.40.51
Of tool steel
7225.40.51.10
Of high-speed steel
7225.40.51.30
Of ball-bearing steel
7225.50.11
Of tool steel
7225.50.11.10
Of high-speed steel
7225.50.11.30
Of ball-bearing steel
7225.50.70.00
Heat-resisting steel
7225.50.80.10
Of high-nickel alloy steel
7225.99.00.10
Of high-nickel alloy steel
7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm:
7226.20.00.00
Of high-speed steel
7226.91.05.00
Of chipper knife steel
7226.91.15.30
Of ball-bearing steel
7226.91.25.30
Of ball-bearing steel
7226.92.10.30
Of ball-bearing steel
7226.92.30.30
Of ball-bearing steel
7226.92.70.05
Of high-nickel alloy steel
7226.92.80.05
Of high-nickel alloy steel
7227
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00.00
Of high-speed steel
7227.20.00
Of silico-manganese steel
7227.90.10.30
Of ball-bearing steel
7227.90.20.30
Of ball-bearing steel
7227.90.60.05
Of high-nickel alloy steel
7227.90.60.10
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00
Bars and rods, of high-speed steel
7228.20
Bars and rods, of silico-manganese steel:
7228.30
Of tool steel (other than high-speed steel):
7228.30.20.00
Of ball-bearing steel
7228.30.40.00
Of chipper knife steel, not cold-formed
7228.30.80.05
Of high-nickel alloy steel
7228.50.10
Of tool steel (other than high-speed steel)
7228.50.10.10
Of ball-bearing steel
7228.50.50.05
Of high-nickel alloy steel
7228.60.10
Of tool steel (other than high-speed steel)
7228.60.10.30
Of ball-bearing steel
7229
Wire of other alloy steel:
7229.20.00
Of silico-manganese steel
7229.90.05.00
Of high-speed steel
7301
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
7301.20.10.00
Of iron or nonalloy steel
7301.20.50.00
Of alloy steel
7302
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:
7302.10.10
Of iron or nonalloy steel
7302.10.50
Of alloy steel
7304
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
7304.11.00
Of stainless steel
7304.19.10
Of iron or nonalloy steel
7304.19.50
Of other alloy steel
7304.22.00
Drill pipe of stainless steel
7304.23.30.00
Of iron or nonalloy steel
7304.23.60
Of alloy steel
7304.24
Other, of stainless steel:
7304.29.50
Of iron or nonalloy steel
7304.29.61
Of other alloy steel
7304.41.30.05
Of high-nickel alloy steel
7304.41.60.05
Of high-nickel alloy steel
7304.49.00.05
Of high-nickel alloy steel
7304.51.50.05
Of high-nickel alloy steel
7304.51.50.15
Of heat-resisting steel
7304.59.20.30
Of heat-resisting steel
7304.59.60.00
Of heat-resisting steel
7304.90.10.00
Of iron or nonalloy steel
7304.90.30.00
Of alloy steel
7304.90.50.00
Of iron or nonalloy steel
7304.90.70.00
Of alloy steel
7305
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:
7305.11.10
Of iron or nonalloy steel
7305.11.50.00
Of alloy steel
7305.12.10
Of iron or nonalloy steel
7305.12.50.00
Of alloy steel
7305.19.10
Of iron or nonalloy steel
7305.19.50.00
Of alloy steel
7305.31.20.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7305.31.40.00
Of iron or nonalloy steel
7305.31.60
Of alloy steel
7305.31.60.10
Of stainless steel
7305.39.10.00
Of iron or nonalloy steel
7305.39.50.00
Of alloy steel
7305.90.10.00
Of iron or nonalloy steel
7305.90.50.00
Of alloy steel
7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:
7306.11.00
Welded, of stainless steel
7306.19.10
Of iron or nonalloy steel
7306.19.51
Of alloy steel
7306.21
Welded of stainless steel:
7306.29.60
Of iron or nonalloy steel
7306.30
Other, welded, of circular cross section, of iron or nonalloy steel:
7306.30.30.00
Tapered steel pipes and tubes principally used as parts of illuminating articles
7306.40
Other, welded, of circular cross section, of stainless steel:
7306.40.50.05
Of high-nickel alloy steel
7306.50
Other, welded, of circular cross section, of other alloy steel:
7306.50.30.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7306.61.10.00
Of iron or nonalloy steel
7306.61.30.00
Of alloy steel
7306.61.50.00
Of iron or nonalloy steel
7306.61.70
Of alloy steel
7306.61.70.30
Of stainless steel
7306.69.10.00
Of iron or nonalloy steel
7306.69.30.00
Of alloy steel
7306.69.50.00
Of iron or nonalloy steel
7306.69.70
Of alloy steel
7306.69.70.30
Of stainless steel
7306.90.10.00
Of iron or nonalloy steel
7306.90.50.00
Of alloy steel
7307
Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
7307.91.10.00
Of iron or nonalloy steel
7307.91.30.00
Of alloy steel (except stainless steel)
7307.91.50.10
Of iron or nonalloy steel
7307.91.50.30
Of alloy steel (except stainless steel)
7307.91.50.50
Of iron or nonalloy steel
7307.91.50.70
Of alloy steel (except stainless steel)
7307.92.30.10
Of iron or nonalloy steel
7307.92.30.30
Of alloy steel (except stainless steel)
7307.93.30
Of iron or nonalloy steel
7307.93.60.00
Of alloy steel (except stainless steel)
7307.93.90.60
Of alloy steel (except stainless steel)
7307.99.10.00
Of iron or nonalloy steel
7307.99.30.00
Of alloy steel (except stainless steel)
7307.99.50.60
Of alloy steel (except stainless steel)
7308
Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
7308.30.10.00
Of stainless steel
7308.90.30.00
Not in part of alloy steel
7309.00.00
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7310
Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7310.10.00.05
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.
7310.10.00.15
Empty steel drums and barrels
7310.29.00.20
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
7310.29.00.55
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
7311.00.00
Containers for compressed or liquefied gas, of iron or steel
7311.00.00.30
Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number
7312
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
7313.00.00.00
Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
7314
Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
7314.12
Endless bands for machinery, of stainless steel:
7314.14
Other woven cloth, of stainless steel:
7315
Chain and parts thereof, of iron or steel:
7315.12.00.40
Welded steel chain
7316.00.00.00
Anchors, grapnels and parts thereof, of iron or steel
7317.00
Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
7318
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
7318.14.10.30
Of stainless steel
7318.14.50.20
Of stainless steel
7318.15.20.51
Of stainless steel
7318.15.20.61
Of stainless steel
7318.15.20.91
Of stainless steel
7318.15.50.30
Of stainless steel
7318.15.50.51
Of alloy steel
7318.15.60.10
Of stainless steel
7318.15.60.70
Of stainless steel
7318.15.80.30
Of stainless steel
7318.15.80.55
Of stainless steel
7318.15.80.82
Of stainless steel
7318.16.00.60
Of stainless steel
7319
Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
7320
Springs and leaves for springs, of iron or steel:
7321
Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:
7322
Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
7323
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
7323.10.00.00
Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
7323.93.00
Of stainless steel
7323.94.00
Of iron (other than cast iron) or steel, enameled
7324
Sanitary ware and parts thereof, of iron or steel:
7324.10.00
Sinks and wash basins, of stainless steel
7324.10.00.10
Stainless steel sinks with one or more drawn bowls (basins)
7325
Other cast articles of iron or steel:
7326
Other articles of iron or steel:
7326.20.00
Articles of iron or steel wire
7326.90.86.10
Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material
7326.90.86.75
Paint roller frames (other than of iron or steel wire)
7415
Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:
7614.10
With steel core:
8202.31.00.00
With working part of steel
8205.51.15.00
Carving and butcher steels, with or without handles
8215.99.40
With base metal (except stainless steel) or nonmetal handles
8301.10.60.20
Lock bodies containing hardened steel components with attached (or insertable) flexible cable composed of wire strands and hardened steel beads
8302.30.30
Of iron or steel, of aluminum or of zinc
8302.41.60
Of iron or steel, of aluminum or of zinc
8302.42.30
Of iron or steel, of aluminum or of zinc
8302.49.60
Of iron or steel, of aluminum or of zinc
8307.10
Of iron or steel:
8308.20.30.00
Of iron or steel and not brightened, not lathed and not machined
8454.20.00.10
For steel ingots
8481.30.20
Of iron or steel
8481.30.20.90
Of steel
8481.80.30
Of iron or steel
8481.90.30.00
Of iron or steel
8482.91.00.10
Of alloy steel
8516.90.25.00
Housings and steel bases for the electric flatirons of subheading 8516.40
8708.10.30.20
Of steel
8708.29.21.20
Of steel
8714.91.50.00
Sets of steel tubing cut to exact length and each set having the number of tubes needed for the assembly (with other parts) into the frame and fork of one bicycle
8716.90.50.47
Of steel
9403.20.00.75
Boltless or press-fit steel shelving units prepackaged for sale as described in statistical note 2 to this chapter
9620.00.65.00
Of iron or steel
9902.14.94
Self-tapping screw anchors of steel (provided for in 7318.14.50), each having a shank (body) measuring 6.35 mm in diameter and an internally threaded hex washer head measuring 9.53 mm, having cut threads (provided for in subheading 7318.14.50)
9902.14.95
Portable propane gas camping stoves, each with one adjustable burner rated to generate up to 7,650 British thermal units (BTUs) of power, with casing of steel and pan support of steel covered with porcelain, the foregoing valued $4 or more but not over $20 each (provided for in subheading 7321.11.10)
9902.14.96
Handles of stainless steel, the foregoing comprising parts of cooking ware (provided for in subheading 7323.93.00)
9902.14.97
Insulated thermal pitchers, each with stainless steel interior and exterior, with hinged stainless steel lid and a capacity not exceeding 1 liter (provided for in subheading 7323.93.00)
9902.14.98
Wire crates of iron or steel, designed for dogs, the foregoing that can be folded down, less than or equal to 0.76 m in length (provided for in subheading 7323.99.90)
9902.14.99
Wire crates of iron or steel, designed for dogs, the foregoing that can be folded down, greater than 0.76 but less than 1.37 m in length (provided for in subheading 7323.99.90)
9902.15.01
Wire cages of iron or steel, each with attached tray of plastics or of steel, such cages with one or two hinged doors for access to inside of cage, the foregoing designed for small pets other than dogs and for use in the home (provided for in subheading 7323.99.90)
9902.15.02
Fire escape ladders no taller than 4.3 m when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $19 each (provided for in subheading 7326.90.86)
9902.15.03
Fire escape ladders measuring 4.4 m or more but not more than 7.4 m tall when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $34.50 each (provided for in subheading 7326.90.86)
9902.15.04
Belts and bandoliers of iron or steel, not coated or plated with precious metal, the foregoing presented with or without buckle (provided for in subheading 7326.90.86)
9902.15.05
Side press wringer handles of steel (provided for in subheading 7326.90.86)
9902.15.06
Riser joints of iron or steel, designed to connect drilling rigs to subsea riser containment packages, the foregoing certified by the importer as designed for high bending moments and tension at the bottom and top of riser (provided for in subheading 7326.90.86)
9902.15.17
Grass shears, each with steel cutting blades articulated on a swivel head for horizontal trimming and vertical edging (provided for in subheading 8201.90.30)
9902.15.20
Hand tools designed for attaching tags to garments with plastic fasteners, each comprising a steel feed mechanism housed in a plastic body and a replaceable hollow needle through which the fastener is fed, then inserted through the garment material (provided for in subheading 8205.59.55)
9902.15.26
Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, containing a brew-through lid and hole at bottom of server for lever faucet attachment (provided for in subheading 8210.00.00)
9902.15.27
Vacuum insulated coffee servers, each with outer layer and liner of steel, with a capacity over 2 liters, with tightly fitted hinged lid with a center hole designed to allow brewed beverages to pass directly into such server with top lever action for dispensing (provided for in subheading 8210.00.00)
9902.15.28
Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, with base but no lid and a hole at bottom of server for lever faucet attachment at time of importation (provided for in subheading 8210.00.00)
9902.15.31
Scissors, valued over $1.75/dozen, each with stainless steel blades, one small loop handle and one larger loop handle and with an overall length of less than 17 cm, the foregoing other than those scissors designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)
9902.15.32
Nail clippers with stainless steel blades,each having one or both blades with rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30).
9902.15.37
Armored safes of welded steel; each weighing 11.8 kg or less, valued $24 or more but not over $36, with digital lock. (provided for in heading 8303.00.00)
9902.15.47
Pistons suitable for use solely or principally with marine propulsion engines, such pistons each having a cast steel crown and aluminum body, weighing 12 kg or more (provided for in subheading 8409.99.92)
9902.15.53
Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)
9902.15.58
Pedestal column assemblies comprising parts for oscillating electric fans, presented in the assembled condition, each consisting of upper and lower tubes of steel, with thermoplastic collet (sleeve) covering the connection point of such tubes together with accompanying collet insert and allowing the two tubes to be locked at adjustable intervals (provided for in subheading 8414.90.10)
9902.15.96
New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)
9902.15.98
New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more
9902.16.25
Electromechanical cylindrical coffee grinders, each operated by pushing the plastic cover into the base, the foregoing having a removable stainless steel bowl with a capacity of more than 0.1 liter and not exceeding 0.2 liter (provided for in subheading 8509.40.00).
9902.16.33
Stainless steel food beaters, designed for use solely on electromechanical hand-held food mixers suitable for domestic purposes (provided for in subheading 8509.90.55).
9902.16.34
Stainless steel dough hooks designed for use solely on electromechanical food hand mixers suitable for domestic purposes (provided for in subheading 8509.90.55)
9902.16.36
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.7 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and two welded stainless steel side brackets with circular holes (provided for in subheading 8509.90.55)
9902.16.37
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)
9902.16.55
Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)
9902.16.61
Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)
9902.16.62
Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using coffee capsules, each having a loading lever containing both stainless steel and plastic (provided for in subheading 8516.71.00)
9902.16.65
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each with electronic clock and self-contained coffee holding chamber, the foregoing designed to be used without separate carafe (provided for in subheading 8516.71.00); the foregoing excluding coffee makers (i) designed for permanent installation in a wall, cabinet or shelf, (ii) with removable tank with a handle or (iii) with loading lever containing both stainless steel and plastics
9902.16.69
Electrothermic stainless steel cylindrical kettles, of a kind used for domestic purposes, each with a liquid crystal display and operational control buttons and display on top of the handle and having a translucent capacity indicator behind the handle (provided for in subheading 8516.79.00)
9902.16.70
Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.71
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.72
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.83
Vacuum insulated coffee carafes, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters and plastic brew-through lid for direct brewing (provided for in subheading 8516.90.90)
9902.16.84
Vacuum insulated thermal pitchers, each with stainless steel interior and exterior, with a capacity exceeding 1 liter but not exceeding 2 liters, measuring 27.94 cm or more but not over 30.48 cm in height, with plastic brew-through lid for direct brewing and plastic spout and handle for pouring (provided for in subheading 8516.90.90)
9902.17.05
Suspension system stabilizer bars of alloy steel, weighing not more than 40 kg, designed for use in Class 7 and Class 8 heavy duty trucks only (provided for in subheading 8708.80.65)
9902.17.79
Fitness equipment designed for circuit training, each unit comprising a steel frame and standing platform incorporating six handles attached to cables and pulleys with variable resistance levels, with an electronic control panel capable of the wireless exchange of data and having a multicolored light-emitting diode (LED) grid (provided for in subheading 9506.91.00)
9902.17.84
Speed bags, free standing heavy bags, heavy bag stands of steel, speed bags with inflatable balls and heavy bag shells (provided for in subheading 9506.91.00)
9902.17.88
Fitness equipment, each unit with pivoting handles and foot pedals with steel footbeds to allow the user to perform alternating movements (whether or not also with stationary handles), combining the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; with an electronic control console having a backlit liquid crystal display/light-emitting diode (LCD/LED) display and capable of the wireless exchange of data; having an integrated heart rate monitor with optional chest strap (provided for in subheading 9506.91.00)
9902.17.98
Insulated coffee servers, each with exterior of stainless steel and vacuum liner of glass and a hinged brew-through lid with push-button dispensing; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)
9902.17.99
Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)
9902.18.02
Vacuum coffee servers, each with lining of stainless steel, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)
9903.80.01
Except for derivative iron or steel products described in heading 9903.80.03, products of iron or steel provided for in the tariff headings or subheadings enumerated in note 16 to this subchapter, except products of Australia, of Argentina, of Brazil, of Canada, of Mexico, of South Korea, or any exclusions that may be determined and announced by the Department of Commerce
9903.80.03
Derivative iron or steel products enumerated in U.S. note 16(a)(ii) to this subchapter, except products of Argentina, of Australia, of Brazil, of Canada, of Mexico, of South Korea, or any exclusions that may be determined and announced by the Department of Commerce
9903.80.14
Tin-free steel, provided for in subheading 7210.50.00
9903.80.16
Silicon electrical steel sheets and strip, provided for in subheading 7225.11.00, 7225.19.00, 7226.11.10, 7226.11.90, 7226.19.10 or 7226.19.90
9903.80.28
Hot-rolled sheet of stainless steel, provided for in subheading 7219.13.00, 7219.14.00, 7319.23.00 or 7219.24.00
9903.80.29
Hot-rolled strip of stainless steel and other products, provided for in subheading 7220.12.10 or 7220.12.50
9903.80.30
Hot-rolled plate of stainless steel, in coils, and other products, provided for in subheading 7219.11.00 or 7219.12.00
9903.80.31
Cold-rolled sheet of stainless steel and other products, provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00
9903.80.32
Cold-rolled strip of stainless steel, provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00
9903.80.33
Cold-rolled plate of stainless steel, in coils, provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050)
9903.80.34
Wire of stainless steel, drawn, provided for in subheading 7223.00.10, 7223.00.50 or 7223.00.90
9903.80.35
Pipes and tubes of stainless steel, provided for in subheading 7304.41.30, 7304.41.60, 7304.49.00, 7305.31.60 (except for statistical reporting number 7305.31.6090), 7306.40.10, 7306.40.50, 7306.61.70 (except 7306.61.7060) or 7306.69.70 (except for statistical reporting number 7306.69.7060)
9903.80.36
Line pipe of stainless steel, provided for in subheading 7304.11.00 or 7306.11.00
9903.80.37
Bars and rods of stainless steel, cold finished, provided for in subheading 7222.20.00 or 7222.30.00
9903.80.38
Bars and rods of stainless steel, hot-rolled, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0017, 7221.00.0018 and 7221.00.0030) or subheading 7222.11.00, 7222.19.00 or 7222.40.30 (except for statistical reporting numbers 7222.40.3025 and 7222.40.3045)
9903.80.39
Blooms, billets and slabs of stainless steel and other products, provided for in subheading 7218.91.00 and 7218.99.00
9903.80.40
Oil country pipe and tube goods of stainless steel and other products, provided for in subheading 7304.22.00, 7304.24.30, 7304.24.40, 7304.24.60, 7306.21.30, 7306.21.40 or 7306.21.80
9903.80.41
Ingot and other primary forms of stainless steel, provided for in subheading 7218.10.00
9903.80.42
Flat-rolled products of stainless steel, provided for in subheading 7219.21.00, 7219.22.00, 7219.31.00 (except for statistical reporting number 7219.31.0010) or 7220.11.00
9903.80.43
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0005, 7221.00.0045 and 7221.00.0075)
9903.80.44
Angles, shapes and sections of stainless steel, provided for in subheading 7222.40.30 (except for statistical reporting numbers 7222.40.3065 and 7222.40.3085) or 7222.40.60
9903.80.47
Wire (other than of stainless steel), provided for in subheading 7217.10.10, 7217.10.20, 7217.10.30, 7217.10.40, 7217.10.50, 7217.10.60, 7217.10.70, 7217.10.80, 7217.10.90, 7217.20.15, 7217.20.30, 7217.20.45, 7217.20.60, 7217.20.75, 7217.30.15, 7217.30.30, 7217.30.45, 7217.30.60, 7217.30.75, 7217.90.10, 7217.90.50, 7229.20.00, 7229.90.10, 7229.90.50 or 7229.90.90
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
9903.80.60
Goods granted relief from the application of quantitative limitation otherwise imposed in relation to subheadings 9903.80.05 through 9903.80.58, for any steel article determined by the Secretary not to be produced in the United States in a sufficient and reasonably available amount, or of a satisfactory quality, or for specific national security reasons, provided that such goods shall be counted toward any quantitative limitation proclaimed by the President until such limitation has filled
2618.00.00.00
Granulated slag (slag sand) from the manufacture of iron or steel
2619.00
Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel:
2620
Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds:
6804.21.00.20
Articles consisting of a continuous rim segment of diamond agglomerated with metal, attached to circular plates of steel (whether or not attached to non-steel plates)
6804.21.00.30
Articles consisting of multiple segments of diamond agglomerated with metal, attached to circular plates of steel, without cutting parts (whether or not attached to non-steel plates)
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.21.00.00
Of stainless steel
7204.30.00.00
Waste and scrap of tinned iron or steel
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.21.00.00
Of alloy steel
7206
Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7207
Semifinished products of iron or nonalloy steel:
7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.25.30.00
Of high-strength steel
7208.26.00.30
High-strength steel
7208.27.00.30
High-strength steel
7208.36.00.30
High-strength steel
7208.37.00.30
High-strength steel
7208.38.00.15
High-strength steel
7208.39.00.15
High-strength steel
7208.51.00.45
Of high-strength steel
7209
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
7209.18.15
Of high-strength steel
7210
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
7210.30.00.30
Of high-strength steel
7210.49.00.30
Of high-strength steel
7211
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
7211.14.00.30
Of high-strength steel
7211.19.15.00
Of high-strength steel
7211.19.45.00
Of high-strength steel
7211.23.15.00
Of high-strength steel
7212
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.20.00
Other, of free-cutting steel
7213.91.30.11
Tire cord-quality steel wire rod as defined in statistical note 4 of this chapter
7213.91.30.15
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
7214
Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.30.00
Other, of free-cutting steel
7215
Other bars and rods of iron or nonalloy steel:
7215.10.00
Of free-cutting steel, not further worked than cold-formed or cold-finished
7216
Angles, shapes and sections of iron or nonalloy steel:
7217
Wire of iron or nonalloy steel:
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more:
7219.12.00.06
Of high-nickel alloy steel
7219.14.00.65
Of high-nickel alloy steel
7219.21.00.05
Of high-nickel alloy steel
7219.22.00.05
Of high-nickel alloy steel
7219.32.00.05
Of high-nickel alloy steel
7219.32.00.35
Of high-nickel alloy steel
7219.33.00.05
Of high-nickel alloy steel
7219.33.00.35
Of high-nickel alloy steel
7219.34.00.05
Of high-nickel alloy steel
7219.90.00.10
Of high-nickel alloy steel
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm:
7220.20.60.05
Of high-nickel alloy steel
7220.20.70.05
Of high-nickel alloy steel
7220.20.80.00
Razor blade steel
7221.00.00
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7221.00.00.05
Of high-nickel alloy steel
7222
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
7222.11.00.06
Of high-nickel alloy steel
7222.19.00.06
Of high-nickel alloy steel
7222.20.00.06
Of high-nickel alloy steel
7222.30.00.12
Of high-nickel alloy steel
7223.00
Wire of stainless steel:
7224
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00.05
Of high-nickel alloy steel
7224.10.00.45
Of tool steel
7224.90.00.05
Of high-nickel alloy steel
7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more:
7225.30.11
Of tool steel
7225.30.11.10
Of high-speed steel
7225.30.30.05
Of high-nickel alloy steel
7225.30.51
Of tool steel
7225.30.51.10
Of high-speed steel
7225.40.11
Of tool steel
7225.40.11.10
Of high-speed steel
7225.40.30.05
Of high-nickel alloy steel
7225.40.51
Of tool steel
7225.40.51.10
Of high-speed steel
7225.40.51.30
Of ball-bearing steel
7225.50.11
Of tool steel
7225.50.11.10
Of high-speed steel
7225.50.11.30
Of ball-bearing steel
7225.50.70.00
Heat-resisting steel
7225.50.80.10
Of high-nickel alloy steel
7225.99.00.10
Of high-nickel alloy steel
7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm:
7226.20.00.00
Of high-speed steel
7226.91.05.00
Of chipper knife steel
7226.91.15.30
Of ball-bearing steel
7226.91.25.30
Of ball-bearing steel
7226.92.10.30
Of ball-bearing steel
7226.92.30.30
Of ball-bearing steel
7226.92.70.05
Of high-nickel alloy steel
7226.92.80.05
Of high-nickel alloy steel
7227
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00.00
Of high-speed steel
7227.20.00
Of silico-manganese steel
7227.90.10.30
Of ball-bearing steel
7227.90.20.30
Of ball-bearing steel
7227.90.60.05
Of high-nickel alloy steel
7227.90.60.10
Of Cold Heading Quality (CHQ) steel, as defined in statistical note 5 to this chapter
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00
Bars and rods, of high-speed steel
7228.20
Bars and rods, of silico-manganese steel:
7228.30
Of tool steel (other than high-speed steel):
7228.30.20.00
Of ball-bearing steel
7228.30.40.00
Of chipper knife steel, not cold-formed
7228.30.80.05
Of high-nickel alloy steel
7228.50.10
Of tool steel (other than high-speed steel)
7228.50.10.10
Of ball-bearing steel
7228.50.50.05
Of high-nickel alloy steel
7228.60.10
Of tool steel (other than high-speed steel)
7228.60.10.30
Of ball-bearing steel
7229
Wire of other alloy steel:
7229.20.00
Of silico-manganese steel
7229.90.05.00
Of high-speed steel
7301
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
7301.20.10.00
Of iron or nonalloy steel
7301.20.50.00
Of alloy steel
7302
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:
7302.10.10
Of iron or nonalloy steel
7302.10.50
Of alloy steel
7304
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
7304.11.00
Of stainless steel
7304.19.10
Of iron or nonalloy steel
7304.19.50
Of other alloy steel
7304.22.00
Drill pipe of stainless steel
7304.23.30.00
Of iron or nonalloy steel
7304.23.60
Of alloy steel
7304.24
Other, of stainless steel:
7304.29.50
Of iron or nonalloy steel
7304.29.61
Of other alloy steel
7304.41.30.05
Of high-nickel alloy steel
7304.41.60.05
Of high-nickel alloy steel
7304.49.00.05
Of high-nickel alloy steel
7304.51.50.05
Of high-nickel alloy steel
7304.51.50.15
Of heat-resisting steel
7304.59.20.30
Of heat-resisting steel
7304.59.60.00
Of heat-resisting steel
7304.90.10.00
Of iron or nonalloy steel
7304.90.30.00
Of alloy steel
7304.90.50.00
Of iron or nonalloy steel
7304.90.70.00
Of alloy steel
7305
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:
7305.11.10
Of iron or nonalloy steel
7305.11.50.00
Of alloy steel
7305.12.10
Of iron or nonalloy steel
7305.12.50.00
Of alloy steel
7305.19.10
Of iron or nonalloy steel
7305.19.50.00
Of alloy steel
7305.31.20.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7305.31.40.00
Of iron or nonalloy steel
7305.31.60
Of alloy steel
7305.31.60.10
Of stainless steel
7305.39.10.00
Of iron or nonalloy steel
7305.39.50.00
Of alloy steel
7305.90.10.00
Of iron or nonalloy steel
7305.90.50.00
Of alloy steel
7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:
7306.11.00
Welded, of stainless steel
7306.19.10
Of iron or nonalloy steel
7306.19.51
Of alloy steel
7306.21
Welded of stainless steel:
7306.29.60
Of iron or nonalloy steel
7306.30
Other, welded, of circular cross section, of iron or nonalloy steel:
7306.30.30.00
Tapered steel pipes and tubes principally used as parts of illuminating articles
7306.40
Other, welded, of circular cross section, of stainless steel:
7306.40.50.05
Of high-nickel alloy steel
7306.50
Other, welded, of circular cross section, of other alloy steel:
7306.50.30.00
Tapered pipes and tubes of steel principally used as parts of illuminating articles
7306.61.10.00
Of iron or nonalloy steel
7306.61.30.00
Of alloy steel
7306.61.50.00
Of iron or nonalloy steel
7306.61.70
Of alloy steel
7306.61.70.30
Of stainless steel
7306.69.10.00
Of iron or nonalloy steel
7306.69.30.00
Of alloy steel
7306.69.50.00
Of iron or nonalloy steel
7306.69.70
Of alloy steel
7306.69.70.30
Of stainless steel
7306.90.10.00
Of iron or nonalloy steel
7306.90.50.00
Of alloy steel
7307
Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
7307.91.10.00
Of iron or nonalloy steel
7307.91.30.00
Of alloy steel (except stainless steel)
7307.91.50.10
Of iron or nonalloy steel
7307.91.50.30
Of alloy steel (except stainless steel)
7307.91.50.50
Of iron or nonalloy steel
7307.91.50.70
Of alloy steel (except stainless steel)
7307.92.30.10
Of iron or nonalloy steel
7307.92.30.30
Of alloy steel (except stainless steel)
7307.93.30
Of iron or nonalloy steel
7307.93.60.00
Of alloy steel (except stainless steel)
7307.93.90.60
Of alloy steel (except stainless steel)
7307.99.10.00
Of iron or nonalloy steel
7307.99.30.00
Of alloy steel (except stainless steel)
7307.99.50.60
Of alloy steel (except stainless steel)
7308
Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
7308.30.10.00
Of stainless steel
7308.90.30.00
Not in part of alloy steel
7309.00.00
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7310
Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7310.10.00.05
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.
7310.10.00.15
Empty steel drums and barrels
7310.29.00.20
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
7310.29.00.55
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
7311.00.00
Containers for compressed or liquefied gas, of iron or steel
7311.00.00.30
Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number
7312
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
7313.00.00.00
Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
7314
Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
7314.12
Endless bands for machinery, of stainless steel:
7314.14
Other woven cloth, of stainless steel:
7315
Chain and parts thereof, of iron or steel:
7315.12.00.40
Welded steel chain
7316.00.00.00
Anchors, grapnels and parts thereof, of iron or steel
7317.00
Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
7318
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
7318.14.10.30
Of stainless steel
7318.14.50.20
Of stainless steel
7318.15.20.51
Of stainless steel
7318.15.20.61
Of stainless steel
7318.15.20.91
Of stainless steel
7318.15.50.30
Of stainless steel
7318.15.50.51
Of alloy steel
7318.15.60.10
Of stainless steel
7318.15.60.70
Of stainless steel
7318.15.80.30
Of stainless steel
7318.15.80.55
Of stainless steel
7318.15.80.82
Of stainless steel
7318.16.00.60
Of stainless steel
7319
Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
7320
Springs and leaves for springs, of iron or steel:
7321
Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:
7322
Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
7323
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
7323.10.00.00
Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
7323.93.00
Of stainless steel
7323.94.00
Of iron (other than cast iron) or steel, enameled
7324
Sanitary ware and parts thereof, of iron or steel:
7324.10.00
Sinks and wash basins, of stainless steel
7324.10.00.10
Stainless steel sinks with one or more drawn bowls (basins)
7325
Other cast articles of iron or steel:
7326
Other articles of iron or steel:
7326.20.00
Articles of iron or steel wire
7326.90.86.10
Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material
7326.90.86.75
Paint roller frames (other than of iron or steel wire)
7415
Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:
7614.10
With steel core:
8202.31.00.00
With working part of steel
8205.51.15.00
Carving and butcher steels, with or without handles
8215.99.40
With base metal (except stainless steel) or nonmetal handles
8301.10.60.20
Lock bodies containing hardened steel components with attached (or insertable) flexible cable composed of wire strands and hardened steel beads
8302.30.30
Of iron or steel, of aluminum or of zinc
8302.41.60
Of iron or steel, of aluminum or of zinc
8302.42.30
Of iron or steel, of aluminum or of zinc
8302.49.60
Of iron or steel, of aluminum or of zinc
8307.10
Of iron or steel:
8308.20.30.00
Of iron or steel and not brightened, not lathed and not machined
8454.20.00.10
For steel ingots
8481.30.20
Of iron or steel
8481.30.20.90
Of steel
8481.80.30
Of iron or steel
8481.90.30.00
Of iron or steel
8482.91.00.10
Of alloy steel
8516.90.25.00
Housings and steel bases for the electric flatirons of subheading 8516.40
8708.10.30.20
Of steel
8708.29.21.20
Of steel
8714.91.50.00
Sets of steel tubing cut to exact length and each set having the number of tubes needed for the assembly (with other parts) into the frame and fork of one bicycle
8716.90.50.47
Of steel
9403.20.00.75
Boltless or press-fit steel shelving units prepackaged for sale as described in statistical note 2 to this chapter
9620.00.65.00
Of iron or steel
9902.14.94
Self-tapping screw anchors of steel (provided for in 7318.14.50), each having a shank (body) measuring 6.35 mm in diameter and an internally threaded hex washer head measuring 9.53 mm, having cut threads (provided for in subheading 7318.14.50)
9902.14.95
Portable propane gas camping stoves, each with one adjustable burner rated to generate up to 7,650 British thermal units (BTUs) of power, with casing of steel and pan support of steel covered with porcelain, the foregoing valued $4 or more but not over $20 each (provided for in subheading 7321.11.10)
9902.14.96
Handles of stainless steel, the foregoing comprising parts of cooking ware (provided for in subheading 7323.93.00)
9902.14.97
Insulated thermal pitchers, each with stainless steel interior and exterior, with hinged stainless steel lid and a capacity not exceeding 1 liter (provided for in subheading 7323.93.00)
9902.14.98
Wire crates of iron or steel, designed for dogs, the foregoing that can be folded down, less than or equal to 0.76 m in length (provided for in subheading 7323.99.90)
9902.14.99
Wire crates of iron or steel, designed for dogs, the foregoing that can be folded down, greater than 0.76 but less than 1.37 m in length (provided for in subheading 7323.99.90)
9902.15.01
Wire cages of iron or steel, each with attached tray of plastics or of steel, such cages with one or two hinged doors for access to inside of cage, the foregoing designed for small pets other than dogs and for use in the home (provided for in subheading 7323.99.90)
9902.15.02
Fire escape ladders no taller than 4.3 m when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $19 each (provided for in subheading 7326.90.86)
9902.15.03
Fire escape ladders measuring 4.4 m or more but not more than 7.4 m tall when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $34.50 each (provided for in subheading 7326.90.86)
9902.15.04
Belts and bandoliers of iron or steel, not coated or plated with precious metal, the foregoing presented with or without buckle (provided for in subheading 7326.90.86)
9902.15.05
Side press wringer handles of steel (provided for in subheading 7326.90.86)
9902.15.06
Riser joints of iron or steel, designed to connect drilling rigs to subsea riser containment packages, the foregoing certified by the importer as designed for high bending moments and tension at the bottom and top of riser (provided for in subheading 7326.90.86)
9902.15.17
Grass shears, each with steel cutting blades articulated on a swivel head for horizontal trimming and vertical edging (provided for in subheading 8201.90.30)
9902.15.20
Hand tools designed for attaching tags to garments with plastic fasteners, each comprising a steel feed mechanism housed in a plastic body and a replaceable hollow needle through which the fastener is fed, then inserted through the garment material (provided for in subheading 8205.59.55)
9902.15.26
Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, containing a brew-through lid and hole at bottom of server for lever faucet attachment (provided for in subheading 8210.00.00)
9902.15.27
Vacuum insulated coffee servers, each with outer layer and liner of steel, with a capacity over 2 liters, with tightly fitted hinged lid with a center hole designed to allow brewed beverages to pass directly into such server with top lever action for dispensing (provided for in subheading 8210.00.00)
9902.15.28
Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, with base but no lid and a hole at bottom of server for lever faucet attachment at time of importation (provided for in subheading 8210.00.00)
9902.15.31
Scissors, valued over $1.75/dozen, each with stainless steel blades, one small loop handle and one larger loop handle and with an overall length of less than 17 cm, the foregoing other than those scissors designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)
9902.15.32
Nail clippers with stainless steel blades,each having one or both blades with rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30).
9902.15.37
Armored safes of welded steel; each weighing 11.8 kg or less, valued $24 or more but not over $36, with digital lock. (provided for in heading 8303.00.00)
9902.15.47
Pistons suitable for use solely or principally with marine propulsion engines, such pistons each having a cast steel crown and aluminum body, weighing 12 kg or more (provided for in subheading 8409.99.92)
9902.15.53
Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)
9902.15.58
Pedestal column assemblies comprising parts for oscillating electric fans, presented in the assembled condition, each consisting of upper and lower tubes of steel, with thermoplastic collet (sleeve) covering the connection point of such tubes together with accompanying collet insert and allowing the two tubes to be locked at adjustable intervals (provided for in subheading 8414.90.10)
9902.15.96
New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)
9902.15.98
New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more
9902.16.25
Electromechanical cylindrical coffee grinders, each operated by pushing the plastic cover into the base, the foregoing having a removable stainless steel bowl with a capacity of more than 0.1 liter and not exceeding 0.2 liter (provided for in subheading 8509.40.00).
9902.16.33
Stainless steel food beaters, designed for use solely on electromechanical hand-held food mixers suitable for domestic purposes (provided for in subheading 8509.90.55).
9902.16.34
Stainless steel dough hooks designed for use solely on electromechanical food hand mixers suitable for domestic purposes (provided for in subheading 8509.90.55)
9902.16.36
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.7 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and two welded stainless steel side brackets with circular holes (provided for in subheading 8509.90.55)
9902.16.37
Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)
9902.16.55
Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)
9902.16.61
Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)
9902.16.62
Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using coffee capsules, each having a loading lever containing both stainless steel and plastic (provided for in subheading 8516.71.00)
9902.16.65
Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each with electronic clock and self-contained coffee holding chamber, the foregoing designed to be used without separate carafe (provided for in subheading 8516.71.00); the foregoing excluding coffee makers (i) designed for permanent installation in a wall, cabinet or shelf, (ii) with removable tank with a handle or (iii) with loading lever containing both stainless steel and plastics
9902.16.69
Electrothermic stainless steel cylindrical kettles, of a kind used for domestic purposes, each with a liquid crystal display and operational control buttons and display on top of the handle and having a translucent capacity indicator behind the handle (provided for in subheading 8516.79.00)
9902.16.70
Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.71
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.72
Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions
9902.16.83
Vacuum insulated coffee carafes, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters and plastic brew-through lid for direct brewing (provided for in subheading 8516.90.90)
9902.16.84
Vacuum insulated thermal pitchers, each with stainless steel interior and exterior, with a capacity exceeding 1 liter but not exceeding 2 liters, measuring 27.94 cm or more but not over 30.48 cm in height, with plastic brew-through lid for direct brewing and plastic spout and handle for pouring (provided for in subheading 8516.90.90)
9902.17.05
Suspension system stabilizer bars of alloy steel, weighing not more than 40 kg, designed for use in Class 7 and Class 8 heavy duty trucks only (provided for in subheading 8708.80.65)
9902.17.79
Fitness equipment designed for circuit training, each unit comprising a steel frame and standing platform incorporating six handles attached to cables and pulleys with variable resistance levels, with an electronic control panel capable of the wireless exchange of data and having a multicolored light-emitting diode (LED) grid (provided for in subheading 9506.91.00)
9902.17.84
Speed bags, free standing heavy bags, heavy bag stands of steel, speed bags with inflatable balls and heavy bag shells (provided for in subheading 9506.91.00)
9902.17.88
Fitness equipment, each unit with pivoting handles and foot pedals with steel footbeds to allow the user to perform alternating movements (whether or not also with stationary handles), combining the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; with an electronic control console having a backlit liquid crystal display/light-emitting diode (LCD/LED) display and capable of the wireless exchange of data; having an integrated heart rate monitor with optional chest strap (provided for in subheading 9506.91.00)
9902.17.98
Insulated coffee servers, each with exterior of stainless steel and vacuum liner of glass and a hinged brew-through lid with push-button dispensing; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)
9902.17.99
Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)
9902.18.02
Vacuum coffee servers, each with lining of stainless steel, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)
9903.80.01
Except for derivative iron or steel products described in heading 9903.80.03, products of iron or steel provided for in the tariff headings or subheadings enumerated in note 16 to this subchapter, except products of Australia, of Argentina, of Brazil, of Canada, of Mexico, of South Korea, or any exclusions that may be determined and announced by the Department of Commerce
9903.80.03
Derivative iron or steel products enumerated in U.S. note 16(a)(ii) to this subchapter, except products of Argentina, of Australia, of Brazil, of Canada, of Mexico, of South Korea, or any exclusions that may be determined and announced by the Department of Commerce
9903.80.14
Tin-free steel, provided for in subheading 7210.50.00
9903.80.16
Silicon electrical steel sheets and strip, provided for in subheading 7225.11.00, 7225.19.00, 7226.11.10, 7226.11.90, 7226.19.10 or 7226.19.90
9903.80.28
Hot-rolled sheet of stainless steel, provided for in subheading 7219.13.00, 7219.14.00, 7319.23.00 or 7219.24.00
9903.80.29
Hot-rolled strip of stainless steel and other products, provided for in subheading 7220.12.10 or 7220.12.50
9903.80.30
Hot-rolled plate of stainless steel, in coils, and other products, provided for in subheading 7219.11.00 or 7219.12.00
9903.80.31
Cold-rolled sheet of stainless steel and other products, provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00
9903.80.32
Cold-rolled strip of stainless steel, provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00
9903.80.33
Cold-rolled plate of stainless steel, in coils, provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050)
9903.80.34
Wire of stainless steel, drawn, provided for in subheading 7223.00.10, 7223.00.50 or 7223.00.90
9903.80.35
Pipes and tubes of stainless steel, provided for in subheading 7304.41.30, 7304.41.60, 7304.49.00, 7305.31.60 (except for statistical reporting number 7305.31.6090), 7306.40.10, 7306.40.50, 7306.61.70 (except 7306.61.7060) or 7306.69.70 (except for statistical reporting number 7306.69.7060)
9903.80.36
Line pipe of stainless steel, provided for in subheading 7304.11.00 or 7306.11.00
9903.80.37
Bars and rods of stainless steel, cold finished, provided for in subheading 7222.20.00 or 7222.30.00
9903.80.38
Bars and rods of stainless steel, hot-rolled, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0017, 7221.00.0018 and 7221.00.0030) or subheading 7222.11.00, 7222.19.00 or 7222.40.30 (except for statistical reporting numbers 7222.40.3025 and 7222.40.3045)
9903.80.39
Blooms, billets and slabs of stainless steel and other products, provided for in subheading 7218.91.00 and 7218.99.00
9903.80.40
Oil country pipe and tube goods of stainless steel and other products, provided for in subheading 7304.22.00, 7304.24.30, 7304.24.40, 7304.24.60, 7306.21.30, 7306.21.40 or 7306.21.80
9903.80.41
Ingot and other primary forms of stainless steel, provided for in subheading 7218.10.00
9903.80.42
Flat-rolled products of stainless steel, provided for in subheading 7219.21.00, 7219.22.00, 7219.31.00 (except for statistical reporting number 7219.31.0010) or 7220.11.00
9903.80.43
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0005, 7221.00.0045 and 7221.00.0075)
9903.80.44
Angles, shapes and sections of stainless steel, provided for in subheading 7222.40.30 (except for statistical reporting numbers 7222.40.3065 and 7222.40.3085) or 7222.40.60
9903.80.47
Wire (other than of stainless steel), provided for in subheading 7217.10.10, 7217.10.20, 7217.10.30, 7217.10.40, 7217.10.50, 7217.10.60, 7217.10.70, 7217.10.80, 7217.10.90, 7217.20.15, 7217.20.30, 7217.20.45, 7217.20.60, 7217.20.75, 7217.30.15, 7217.30.30, 7217.30.45, 7217.30.60, 7217.30.75, 7217.90.10, 7217.90.50, 7229.20.00, 7229.90.10, 7229.90.50 or 7229.90.90
9903.80.48
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00
9903.80.49
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80
9903.80.56
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05
9903.80.60
Goods granted relief from the application of quantitative limitation otherwise imposed in relation to subheadings 9903.80.05 through 9903.80.58, for any steel article determined by the Secretary not to be produced in the United States in a sufficient and reasonably available amount, or of a satisfactory quality, or for specific national security reasons, provided that such goods shall be counted toward any quantitative limitation proclaimed by the President until such limitation has filled
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
Heading/
Subheading
Stat
Suf
fix
Article Description Unit
of
Quantity
Rates of Duty
1 2
General Special
2618.00.00 00 Granulated slag (slag sand) from the manufacture of iron or steel
t
Free10%